Question about 2005 Audi A6

2 Answers

Head lamp bulb chance on audi a6 2005?

How do you change the right hand headlamp on a 2005 Audi A6?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You mean you really have to remove the bumper just to change a bulb in the head lamp.... crazy

Posted on Aug 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

You need to remove the front bumer and you will see the head lamp bolts remove them and your headlamp unit is free as a bird.

Posted on Jul 19, 2009

  • gtiR Jul 19, 2009

    you need to remove the front bumer and you will see the head lamp bolts remove them and your headlamp unit is free as a bird.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2006 Audi A6 Quattro, the right rear brake light was not working while braking. When I removed the lamp to replace the bulb, four bulbs were on, and one did not work. Then, four bulbs were not...


BULB SOCKET HAS SOME CORROSION IN THEM NEED SPRAY SOME ELECTRICAL CLEANER CLEAN CORROSION. OR YOU HAVE ELECTRICAL PROBLEM IN THE CONTROL MODULE THAT CONTROLS REAR LIGHTS.

Aug 28, 2011 | 2005 Audi A6

1 Answer

Change drivers side headlamp bulb


Front bumper cover has to be dropped down to be able to loosen headlamp unit enough to get to the back of it. Dealer will probably charge an hour for labor.

Dec 24, 2010 | 2005 Audi A6

1 Answer

How do you change a head light bulb on a audi 2007 a6


how do you remove headlight assembly drivers side on audi a6 2001

Oct 27, 2010 | 2006 Audi A6

1 Answer

Left hand main head light not working. replacing light bulb did not help.


If you have headlamps failing and bulbs do not do the trick, the headlamp switch is your culprit and should be changed very very soon. Let me know if you need anything else. I have diagrams.

Aug 22, 2010 | 1998 Audi A4

1 Answer

How to change the fog lamp bulb on an audi a6 avant 2003


First remove the driver's side fog lamp plastic cover out from front bumper. After that you will find torx socket head panel screws from fog lamp. See picture below:


4958043.png

Jun 12, 2010 | 2003 Audi A6

1 Answer

Installation guide for the conversion of Audi A6 headlight


I am not sure but I think you need to change the whole headlamp, at least that is how it works in A4.

Apr 14, 2010 | 2000 Audi A6

1 Answer

How to change side bulb on audi a6


pull it away from left to right it is only pushfit...

Mar 07, 2010 | 2001 Audi A6

1 Answer

Audi A6 2005 LH Rear Turn Signal & Brake Light Failure


I had a problem with rear left side signal brake and reversing lamps not working on my 2007 A6 2.L Tdi SE.( Intermittent fault for 2 months)
I think I have identified the problem.
The seal between the Lens and the bulb plate had allowed moisture into the lamp.
During sunny days the water evaporates and enters the multi pin connector at the rear of the lamp.
On close examination of the connector I noticed minor discolouring of the ground ( Heavy Brown Wire connector Causing intermitting lamp failure )
SOLUTION
I expelled all moisture from the lamp and multi-pin connector.
I removed the neoprene seal from the lamp and refitted it good side up
I cleaned the ground pin on the connector with 600 grade paper and contact cleaner
I put a slight twist in this pin with long nose pliers so as to get better connection.
Lamp is working fine since.
Changing the bulb plate may also work
Great care must be taken when changing bulbs or this problem will reoccur

Sep 16, 2009 | 2005 Audi A6

1 Answer

How do I change the head xenon light bulb on my 2002 Audi A6


you need to remove the headlamp assembly to change the bulb should be held in with 3-4 10mm bolts

Aug 19, 2009 | 2002 Audi A6

Not finding what you are looking for?
2005 Audi A6 Logo

Related Topics:

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14185 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...