Question about 1994 Ford Tempo

1 Answer

Fuel pump problem

I've droped the gas tank and disconnected the gas lines. How do I disconnect the eletronic module from the top of the tank. Fuel pump is not working.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

Push down on the tab at the connector, wiggles and pull apart. Be sure to remove the little red saftey lock first. Iy just pulls out also wiht a bit of resistance.

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89escort replace fuel pump


1st Disconnect the negative battery cable!
Drop the gas tank out after you support the rear end car on Jack stands. From there it is just grunt work, all the electrical to pump disconnect at the fuel pump plate on the top of the tank. Disconnect the fuel lines as well. If the tank is full take great care when you knock the locking ring loose that retains the fuel pump module into the tank, use a piece of wood or a brass drift punch. Careful not to pinch the new "O" ring tank opening seal when installing the new pump. Good luck and dress for dirt and gas.

Jul 22, 2016 | Cars & Trucks

1 Answer

How to replace fuel module regulator


to replace the fuel pump module.first you need to relieve the fuel system pressure.turn off radio first, then disconnect the negative battery cable.drain fuel from fuel tank.then then safely raise support car on jack stands. make sure sitting on solid level ground then remove the fuel charcoal canister hoses and vent line remove disconnect fuel pump. disconnect fuel pump electrical connector and remove fuel filler hose from fuel tank then remove the fuel tank from the vechicle.the heat shield and the rear exhaust system may have to be remove if you problem dropping the fuel tank.once fuel tank dropped you need snap ring pliers to remove the fuel pump module retaining ring.disconnect the fuel pump sending unit.disconnect the fuel pressure sensor and fuel pump module electrical connector .if you need help to replace the fuel level sending unit.you need a haynes repair manual.it has instruction how to remove and replace the fuel level sending unit.but most of the time the whole new fuel pump module come with new fuel level sending unit.if you are replacing fuel pump.when done put every thing back visa versa. be very careful working around gasoline and fuel tank.dont smoke.becareful dont make no sparks with wrenches when removing gas tank.wear safety glasses and have a helper at all times. dont work under vechicle by your self.

Apr 11, 2011 | 1999 Oldsmobile Alero

3 Answers

Where is the fuel pump located on the 2006 Ford Five Hundred? Is it located inside the fuel cell?


Yep!


c17hydro_94.gif
Removal & Installation
  1. Disconnect the negative battery cable.
  2. Drain the fuel tank.
  3. Remove the rear lower seat cushion.
  4. Remove the fuel pump module cover.
  5. Remove any dirt that has accumulated around the fuel pump module attaching flange to prevent it from entering the tank during service.
  6. Disconnect the fuel pump electrical connectors.
  7. Disconnect the fuel pump quick connect coupling from the fuel pump module.
  8. Disconnect the fuel vapor tube quick connect coupling from the fuel pump module.
  9. Turn the fuel pump module locking ring using a locking ring removal tool, and remove the locking ring.
  10. Remove the fuel pump module and disconnect the quick connect fittings from the bottom of the fuel pump.

Jan 17, 2011 | Ford Five Hundred Cars & Trucks

1 Answer

Replace fuel pump 1989 cadillac deville


Hello, The fuel pump is inside the gas tank. Remove the exhaust, Disconnect and remove all hoses and lines, also disconnect all electrical wires, remove 4 bolts from straps holding tank. Drop tank down. Remove lines and hoses from top of fuel pump module, remove lock ring, pull fuel pump module, turn unit as necessary so you don't destroy the fuel level sender. Hope this helps

Sep 04, 2010 | 1989 Cadillac Sedan DeVille

2 Answers

How do u get the fuel pump on


Removal & Installation To Remove:
  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2. Shift the vehicle into NEUTRAL and position it on a hoist.
  3. Release the fuel pressure.
  4. Disconnect the negative battery cable.
  5. Remove the fuel tank filler cap.
  6. Drain as much fuel from the tank as possible.
  7. Using suitable hose pinching pliers, clamp the fuel tank filler hose. Clamp the fuel tank filler hose in the location shown ford-05-00-396.gif

  8. Disconnect the three quick connect couplings from the fuel tank tubes at the tank.
  9. Disconnect the fuel pump electrical connector.
  10. Disconnect the fuel filter inlet tube from the filter.
  11. Position a suitable lifting device under the fuel tank.
  12. Remove the two fuel tank support strap bolts.
  13. Lower the fuel tank to access the fuel pump module while swinging the fuel tank support straps away from the tank.
  14. Clean the area around the fuel pump mounting flange.
  15. Disconnect the fuel pump module electrical connector and the fuel pump module fuel outlet tube.
  16. Using the special tool, turn the fuel pump module retaining ring counterclockwise and remove it. CAUTION
    The fuel pump module must be handled carefully to avoid damage to the float arm, filter and convolute hoses.
  17. Turn the fuel pump module counterclockwise and the fuel pump module will release from the locking tabs. Remove the fuel pump module from the fuel tank.
To Install:
  1. Install the fuel pump module in the fuel tank.
  2. Connect the fuel pump module electrical connector and the fuel pump module fuel outlet tube.
  3. Raise the tank into position and install the mounting strap bolts. Tighten the bolts to 26 ft-lbs (35 Nm).
  4. Connect the fuel lines and electrical connectors at the fuel tank.
  5. Lower the vehicle and refill the tank.
  6. Connect the negative battery cable.
  7. Turn the ignition key to the ON position to pressurize the fuel system.
  8. Visually inspect the fuel system for leaks.
prev.gif next.gif

Aug 19, 2010 | 2001 Ford Taurus

2 Answers

Where is the fuel pump located on a 1994 Cheverolet Camaro?


In the gas tank, not an easy job on this type of car exhaust tail pipe will have to come down to make room for the gas tank to come down.

May 21, 2010 | 1994 Chevrolet Camaro

2 Answers

How do I replace the fuel pump on a F150 Ford truck and do i need any speical tools to do this


Things You'll Need:
  • Ratchet and socket
  • Wrench set
  • Floor jack and 2 jack stands
  • Ratchet extension
  • Fuel tank sending unit wrench number 310-123
  • Screwdriver
  • Slip joint pliers
  • New O-ring seal
  • Clean engine oil.
Steps to replace fuel pump:
  • Detach the splash shield from the frame rail located underneath the driver's side door. Use a ratchet and socket.
  • Unplug the electrical connector you will see after removing the splash shield. The connector leads to the fuel pump module.
  • Start the engine and let it idle until it stalls. Then crank the engine for about 5 seconds to relieve the remaining fuel pressure from the system. If the engine does not start due to a bad fuel pump, crank the engine to make sure fuel pressure is relieved.
  • Turn the ignition key to the Off position.
  • Disconnect the ground, battery cable from the battery using a wrench.
  • Jack up the rear of your F-150 using a floor jack and support it on 2 jack stands.
  • Remove the tank shield if your particular model is equipped with it using a ratchet, ratchet extension and socket.
  • Support the fuel tank with the floor jack.
  • Disconnect the straps holding the tank to the truck's body using the ratchet, ratchet extension and socket.
  • Lower the fuel tank just enough to gain access to the fuel lines, vapor lines and fuel pump electrical connector on top of the tank.
  • Disconnect the fuel lines and vapor lines from the sending unit/pump module. Press the lock tabs on the lines quick connectors and carefully pull the lines from their fittings. Then unplug the pump-module electrical connector.
  • Release the sending unit/pump module by turning the lock ring counterclockwise using the fuel tank sending unit wrench 310-123 or equivalent. See the Resources box and Tip boxes at the bottom of this article for more information.
  • Lift the sending unit/pump module off the tank carefully and discard the O-ring seal underneath the flange of the module.

    Install the Fuel Pump
  • Remove the old fuel pump from the module using a screwdriver and a pair of slip joint pliers and install the new pump on the module.
  • Lubricate the new O-ring seal with clean engine oil and lay the seal on the fuel tank opening.
  • Install the sending unit/pump module in the tank and turn the lock ring clockwise using the fuel tank sending unit wrench.
  • Lift the fuel tank just enough to attach the fuel lines, vapor line and plug the pump module electrical connector.
  • Raise the fuel tank to set it in its mounting place and secure the tank straps using the ratchet, ratchet extension and socket.
  • Install the fuel tank shield using the ratchet, ratchet extension and socket, if you had to remove it.
  • Lower your F-150..
  • Connect the ground, battery cable using the wrench.

Dec 05, 2009 | 2004 Ford F150

2 Answers

How do i change fuel pump for 2003 pontiac grand prix


yo have to lower the gas tank and disconnect all the lines and wire harness connectors, then you pull the fuel pump module out from the top of the tank!!
here is what the module assembly looks like:
http://www.autozone.com/autozone/catalog/parts/partsShelf.jsp?displayName=Fuel+Pump&currentPage=1&categoryDisplayName=Fuel+Delivery&navValue=14900078&itemId=prod61225&parentId=cat30060

Jun 17, 2009 | 2003 Pontiac Grand Prix

2 Answers

Need directions on replacing 2000 dodge durange 4.7 ltr fuel pump


WHAT YOU WILL NEED TO DO FIRST IS JACK THE TRUCK UP AS HIGH AS SAFELY POSSIBLE.. BE SURE TO USE JACK STANDS THAT WAY THE TRUCK DOENT FALL OVER.. ONCE UP IN THE AIR HE WILL NEED TO TAKE THE GAS TANK OUT OF THE TRUCK.. THERE ARE TWO STRIPS HOLDING THE TANK INTO PLACE..THEN WHEN HE GETS THE TANK ON THE GROUND, REMOVE ALL THE FUEL LINES.(THERE ARE CLIPS ON THE PLASTIC LINES BE EASY) THEN WHEN HE GETS THE LINES LOOSE, THERE IS A METAL RING ON THE TOP ON THE FUEL TANK..HE CAN USE A SCREW DRIVER TO GET THE RING OFF( HE WILL SEE HOW TO TAKE IT OFF WHEN HE LOOKS AT IT) WHEN THE RING IS OFF PULL THE FUEL PUMP ASSEMBLY OUT OF THE TANK AND REPLACE THE FUEL PUMP (THE WHOLE FUEL PUMP WILL JUST NEED PULLED OUT, NO SCREWS) ..JUST REPEAT THESE STEPS BACKWARDS TO REINSTALL .. THIS SHOULD SOLVE YOUR $700 PROBLEM..GOOD LUCK AND THANKS FOR USING FIXYA.COM...KEITH..

Mar 14, 2009 | 2000 Dodge Durango

2 Answers

1999 jeep cherokee do you have to remove the fuel pump to replace


The combination Fuel Filter/Fuel Pressure Regulator is located on the fuel pump module. The fuel pump module is located on top of fuel tank.

The filter/regulator may be removed without removing fuel pump module although fuel tank must be removed.

REMOVAL
  1. Remove fuel tank. Refer to Fuel Tank Removal/Installation.
  2. Clean area around filter/regulator.
  3. Disconnect fuel line at filter/regulator. Refer to Quick-Connect Fittings for procedures.
  4. Remove retainer clamp from top of filter/regulator. Clamp snaps to tabs on pump module. Discard old clamp.
  5. Pry filter/regulator from top of pump module with 2 screwdrivers. Unit is snapped into module
  6. Discard gasket below filter/regulator.
    1. Before discarding filter/regulator assembly, inspect assembly to verify that O-rings are intact. If the smallest of the two O-rings can not be found on bottom of filter/regulator, it may be necessary to remove it from the fuel inlet passage in fuel pump module.
    INSTALLATION
    1. Clean recessed area in pump module where filter/regulator is to be installed.
    2. Obtain new filter/regulator (two new O-rings should already be installed)
    3. Apply a small amount of clean engine oil to O-rings. Do not install O-rings separately into fuel pump module. They will be damaged when installing filter/regulator.
    4. Install new gasket to top of fuel pump module.
    5. Press new filter/regulator into top of pump module until it snaps into position (a positive click must be heard or felt).
    6. The arrow molded into top of fuel pump module should be pointed towards front of vehicle (12 O'clock position).
    7. Rotate filter/regulator until fuel supply tube (fitting) is pointed towards front of vehicle (12 O'clock position).
    8. Install new retainer clamp (clamp snaps over top of filter/regulator and locks to flanges on pump module).
    9. Connect fuel line at filter/regulator. Refer to Quick-Connect Fittings for procedures.
    10. Install fuel tank. Refer to Fuel Tank Removal/Installation.
WARNING: THE FUEL SYSTEM IS UNDER CONSTANT FUEL PRESSURE EVEN WITH THE ENGINE OFF. THIS PRESSURE MUST BE RELEASED BEFORE SERVICING FUEL TANK .

Two different procedures may be used to drain fuel tank (lowering tank or using DRB scan tool).

The quickest draining procedure involves lowering the fuel tank.

As an alternative procedure, the electric fuel pump may be activated allowing tank to be drained at fuel rail connection. Refer to DRB scan tool for fuel pump activation procedures. Before disconnecting fuel line at fuel rail, release fuel pressure. Refer to the Fuel System Pressure Release Procedure for procedures. Attach end of special test hose tool number 6541, 6539, 6631 or 6923 at fuel rail disconnection (tool number will depend on model and/or engine application). Position opposite end of this hose tool to an approved gasoline draining station. Activate fuel pump and drain tank until empty.

If electric fuel pump is not operating, tank must be lowered for fuel draining. Refer to following procedures.

FUEL TANK REMOVAL
  1. Disconnect negative battery cable at battery.
  2. Release fuel system pressure. Refer to the Fuel System Pressure Release.
  3. Raise and support vehicle.
  4. If Equipped: Remove fuel tank skid plate.
  5. Remove 4 fuel hose shield mounting bolts and remove fuel hose shield from body.
    1. Remove fuel tank fill hose and vent hose clamps at fuel tank filler tube. Remove both hoses at fuel filler tube.
    2. Remove exhaust tailpipe heat shield mounting bolts and remove shield. CAUTION: To protect fuel tank from exhaust heat, this shield must reinstalled after tank installation.
    3. Place a hydraulic jack to bottom of fuel tank. WARNING: PLACE A SHOP TOWEL AROUND FUEL LINES TO CATCH ANY EXCESS FUEL .
      1. Disconnect fuel supply line from fuel extension line near front of fuel tank. Refer to Fuel Tubes/Lines/Hoses and Clamps. Also refer to Quick-Connect Fittings for procedures.
      2. Disconnect EVAP canister vent line near front of tank.
      3. Disconnect fuel pump module electrical connector (pigtail harness) near front of tank. Harness connector is clipped to body.
        1. Remove two fuel tank strap nuts. Position both tank support straps away from tank.
        2. Carefully lower right side of tank while feeding both fuel hoses through access hole in body. Fuel Tank Full And Not Drained Using DRB Scan Tool: To prevent fuel loss through hoses, keep left side of tank higher than right side while lowering. Do not allow hose openings to drop lower than top of tank.
        3. Continue lowering tank until clear of vehicle. Place tank on floor with left side (hose side) higher than right side
          1. Drain tank by removing fuel fill hose at tank. Fuel fill hose is largest of 2 hoses. Insert the drain hose (from an approved gasoline draining station) into hose opening. Drain tank until empty.
          2. If fuel pump module removal is necessary, refer to Fuel Pump Module Removal/installation for procedures.
          INSTALLATION
          1. If fuel pump module is being installed, refer to Fuel Pump Module Removal/installation for procedures.
          2. Install fuel fill/vent hoses to tank fittings. To prevent hose from kinking, rotate each hose until index mark on hose is aligned to index tang on fuel tank.
          3. Install hose clamps to hoses. Position clamps between index marks on each hose.
          4. Position fuel tank to hydraulic jack.
          5. Raise tank into position while guiding fuel fill and vent hoses into and through access hole in body.
          6. Continue raising tank until positioned to body.
          7. Attach two fuel tank mounting straps and mounting nuts. Tighten nuts to 10 Nm (90 in. lbs.) torque. Do not over tighten nuts.
          8. Install both fuel hoses to fuel fill tube. Tighten both retaining clamps.
          9. Position fuel hose shield to body. Install and tighten 4 mounting bolts.
          10. Connect fuel pump module pigtail harness electrical connector near front of tank.
          11. Connect fuel pump module supply line near front of tank. Refer to Quick-Connect Fittings for procedures.
          12. Connect EVAP hose near front of tank.
          13. Install exhaust tailpipe heat shield.
          1. Install fuel tank skid plate (if equipped).
          1. Lower vehicle and connect battery cable to battery.

Feb 08, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
1994 Ford Tempo Logo

Related Topics:

53 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...