Question about 2000 Ford Excursion

1 Answer

How do you operate a quick connect tool? - 2000 Ford Excursion

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Not sure which tool/s you are intendung ?? however if you observe the tool it has a sleeve around its circumfrence this sleve has to be pulled/pushed back and held then the attachment/tool you wish to use ? can be inserted fully home then the sleeve released to ensure attached tool is locked ? try to pull it out if correctly locked it will not pull out so is safe to use to release tool attachment pull/or push back sleeve then pull out tool attachment the tool attachments must have hexagonal locking bits that fit into the tools jaws unless the tool is air line pressure quick fits then these have locking rings around the circumference the actual locking device is a series of ball bearings that are sprung closed untill sleeve is pulled /pushed back then the balls are slid up a tapered cone and outwards to enable tool attachment to pass balls then when sleeve released the balls move under sping back to lock position hope this is what you are looking for ? best wishes from uk

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do you remove the quick connect fittng on 97 expidition heater hose?


Parts stores sell an inexpensive little piece called a quick connect fitting tool. It slips inside the quick connect fitting and releases it so you can pull it apart. If you tell them at the store it is for a heater hose fitting for Expeditions, they should have the right sized one in stock. The quick connect fittings have many sizes and applications.

May 22, 2014 | 1997 Ford Expedition

1 Answer

Broken quick connect at fuel filter


Some require a special disconnect tool other style which you may have could just be a piece of old plastic clip stuck which you can use a small pick tool to work it out

Dec 05, 2013 | 1998 Chevrolet Malibu

1 Answer

Quick disconnect tool is not helpful on disconnecting fuel line from fuel filter on 92 F 150 w/4.9L


there are a few different tools and some work well and others just plain ****. Patience is the key sometimes with poor quality tools. If yo have the multi quick dis connect tool that is like the swiss army knife of quick disconnect tools, thats the worst one.
My neighbor had trouble with a quick disconnect fitting and came to get me. when I got in his garage he said "here's the tool." I threw it in the trash and came back to get my set of quick disconnects. It tool me longer to open the case, get the tool out and put it back than the time it took to undo the connection.

Jul 19, 2012 | Cars & Trucks

1 Answer

Change fuel filter


Remove the screw from the metal bracket that is holding the fuel filter. It is located right below the battery to the right. To get the quick connect fuel line fittings off. YOU WILL NEED A DISCONNECT TOOL. O'Reillys or Auto Zone should have the tool pack of (6) The small gray one fits the 2001 Sportage. Put the plastic tool under the fuel line fitting and squeeze together. The fuel line will pop off the old filter. To remove the rear fuel line, go under the vehicle and use the tool on the fuel line. There is a rubber hose with 2 quick connect fittings. One end attaches to the filter and the other end attaches to a metal fuel line under vehicle. Remove the fitting that attaches to the metal line since there is no room on the back of filter for the tool to fit. Once you get the whole assembly out of the car.... you can work on getting the fitting off the rear of the old filter. Be very careful not to damage the plastic quick connect fittings! KEEP YOUR FACE CLEAR OF THE FILTER A SMALL AMOUNT OF GAS WILL COME OUT!!!!!

Feb 28, 2012 | 2001 Kia Sportage

1 Answer

How to disconnect fuel line for a 98 deville


YOU NEED TO GO TO AUTO PARTS STORE AND BUY FUEL LINES DISCONNECT TOOLS.THE FUEL LINE DISCONNECT TOOLS GOES IN THE MALE SIDE OF THE QUICK CONNECT FITTING.INSERT FUEL LINE DISCONNECT TOOL INTO THE FUEL LINE CONNECTER FAR ENOUGH TO RELEASE THE INNER LOCKING SPRING.AND THEN PULL OFF CONNECTOR. LUBRICATE THE MALE PIPE END WITH A FEW DROPS OF OIL.BEFORE RECONNECTING THE QUICK CONNECT FITTING. WARNING THIS IS A DANGEROUS JOB, YOU NEED A HAYNES REPAIR MANUAL TO LOOK AT PHOTOS HOW TO DISCONNECT FUEL LINES.BECAUSE IF YOU DONT DO IT CORRECTLY.AND DAMAGE FUEL LINES.YOU WILL HAVE A FIRE GAS WILL SPRAY ALL OVER THE PLACE.

May 10, 2011 | 1998 Cadillac DeVille

1 Answer

Fuel line headed towards motor meeting flexible hose. is the metal fuel line threaded with orings?


All newer GM models use a quick connect fitting for the fuel lines. They are not threaded and do not have a replaceable o-ring. You can buy a cheap set of disconnect tools from any auto parts store or sears. Another option would be to buy them on line. The cheaper tools usually do not work the greatest. One solution I have used is to make a small strip of sheetmetal and wrap it around the metal line. Using a pliers you can press the sheetmetal into the quick connect while pushing the flexible line towards the metal tubing. Once the sheetmetal engages inside the quick connect, pull the hose off. Be careful with the sheetmetal, because it can be sharp. I would recommend buying the more expensive removal tools, especially if this is something you do more than once.

Mar 28, 2011 | 2001 Oldsmobile Alero

1 Answer

Can not get quick disconnect line to release out of the transmission on 1997 ford ranger


The quick conect lines can sometime be hard to get the springs to release. First of all you need to make sure you have the proper tool and size that will fit inside of the connection. Then sometimes you might have to slightly take a small hammer and lightly tap the release tool up into the quick connect to release the spring. This usually works for me. But you must have the proper tool to do this.

Mar 28, 2010 | 1997 Ford Ranger SuperCab

2 Answers

1999 silverado how do i release the heater hose outlet quick disconnect? thanks


with the quick connect tool, purchase at you part dealer, just push towards the end of the hose and pull hose off.

Oct 26, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Disconnect fuel lines from fuel tank


There are two types of connectors on these lines. Either brightly colored quick-connects which do not require tools, (Just squeeze the tabs together). Or black quick connects which must be pushed back to remove line.

Jun 21, 2009 | 2001 Jeep Grand Cherokee

1 Answer

99 jeep cherokee sport lower trans line driverside


Usually, the trans connect to the radiator is a "quick connect" type of fitting. You should buy a quick connect tool at autozone or somewhere similar...They usually have these tools.

Jan 31, 2009 | 1999 Jeep Cherokee

Not finding what you are looking for?
2000 Ford Excursion Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...