Question about 2002 Chevrolet Monte Carlo

1 Answer

2001 monte, radio comes on but no sound

Reset for oil life etc still works, believe the radio was working on and off for a while but nothing now. Not even static.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

Need to replace radio assembly.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will a Kenwood KDC-HD548U work in a 2001 Monte Carlo


I am sure that you could make it work but you would loose your message center.

Dec 31, 2011 | 2001 Chevrolet Monte Carlo

Tip

Chevrolet service light 1991-01


Camaro

1998-01

To reset the "OIL CHANGE" light, press and hold the "TRIP/OIL RESET" button on the instrument panel for 12 seconds. When the light flashes and then goes out, the system is reset.


Corvette


1997-01

To reset the monitor after an oil change, turn the ignition on. Press the "TRIP" button so that the "OIL LIFE" percentage is displayed. Press "RESET" and hold it for two seconds. The word "RESET" should appear on the monitor, then "OIL LIFE 90%".


Impala,
Monte Carlo


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator three times within five seconds. If the CHG OIL SOON lights two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHG OIL SOON light comes back on, the system has not been reset, repeat the procedure. Follow this procedure to reset the GM Oil Life System using the DE 100 Series Radio. Turn the ignition to ACC or ON and the radio off. Press and hold the DISP button on the radio for at least five seconds until SETTINGS is displayed. Press the SEEK up or down arrow to scroll through the main menu. Scroll until OIL LIFE appears on the display. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. Once the message has been reset, scroll until EXIT appears on the display. Press the DISP button to exit programming. A chime will be heard to exit programming. A chime will be heard to verify the exit.


Impala,
Caprice


1994

To reset the "CHANGE OIL" light, turn the ignition switch to the run position with the engine off. Access the reset button on the end of the instrument panel by the fuse block. Press the switch and hold it for at least 5 seconds.



Lumina,
Monte Carlo,
Impala,
Caprice


1996-00,
1996-99,
1995-96,
1995-96

To reset "CHANGE OIL" light, turn the ignition switch to the run position without starting the engine. Fully depress and release the accelerator pedal 3 times within 5 seconds. The light will flash and go out.


Corvette


1990-96

After an oil change, or when "CHANGE OIL" appears on the Trip Monitor, with the ignition on and engine off, press the "ENG MET" button (located on trip monitor) once. Press the "ENG MET" button again within 5 seconds. Within 5 seconds, press and hold the "RANGE" button (1990-1994) or "GAUGES" button (1995). The light will flash. When it stops flashing and goes out, the system is reset.


Chevrolet Suburban,
GMC Yukon XL,
Chevrolet Silverado,
GMC Trucks Sierra


2000-01,
1999-00

Turn the ignition key to the RUN position. Fully push and release the accelerator pedal 3 times within 5 seconds. If the CHANGE OIL SOON light flashes 2 times, the system is reset. However, if the light comes on and stays on for 5 seconds, the system did not reset. Repeat the procedure if the system does not reset.


Silverado, Sierra Trucks


1991-93

To reset the "CHANGE ENGINE OIL" message, turn the ignition key to the run position. Press and release the accelerator pedal three times within 5 seconds. If the light flashes for 5 seconds, the system is reset. Repeat procedure as needed.















on Dec 07, 2009 | Chevrolet Camaro Cars & Trucks

2 Answers

I change the oil keep saying need oil change


on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor. the message center should reset and go off. turn key off and then start car. to see if reset.sometimes you have to go slow 3 times to floor with gas pedal.MAKE SURE ENGINE IS NOT RUNNING WHEN YOU DO THE RESET.

Aug 17, 2010 | 2001 Chevrolet Venture

2 Answers

I have a monte carlo 04 and i'm trying to turn off the change engine oil light


there is a button to reset the oil light, check your car manual ,it should be there, when you find this button, all you have to do is hold down for 5 seconds,thats it ,plus YOU MIGHT LOW ON ENGINE OIL,CHECK YOUR ENGINE NOW!!!!!!!!!!

Oct 28, 2009 | 2004 Chevrolet Monte Carlo

2 Answers

2004 Chevrolet Monte Carlo reset engine oil light


I have a 04 MC and the only way i know of turning it off is through the radio.. i havent been able to turn mine off since i got a new cd player though. And i dont quite remember how to do it on the stock radio.. but dont go buy anything new nothing is wrong!

Mar 30, 2009 | 2004 Chevrolet Monte Carlo

2 Answers

2002 chevy monte carlo got oil changed but they didnt reset code to change oil.


turn key on engine off depress gas pedal fully 3 times with in 5 seconds good luck lm63dph.

Dec 26, 2008 | 2003 Chevrolet Monte Carlo

1 Answer

Can u reset oil,tire,ect...without original radio on a 2001impala


You should be able to reset the oil life light.
TRY this...
put the key in and turn to the accessory point,do not start the car.
Once you get to "acc" on the ignition press down 3 times on the gas pedal but NOT fast,sort of slowly.
Turn it off then start the car,it should reset and the light goes off if not..repeat it.
Always works for me.
I hate the reminder set up,stupid if ya ask me,i know when to change oil etc.

Dec 01, 2008 | 2005 Chevrolet Impala

2 Answers

2005 Monte Carlo Change Oil Light Reset


Hiiiiiiiiiiii...........
Are 2 procedure to Reset the oil life.
1-- Using the accelator pedal.
Turn ignition ON with engine OFF
Fully press and release the accelerator pedal 3 times within 5 seconds.
The oil change light will flash a few times and them go OFF.
If the light is still on repeat the procedure.

2-- This procedure need the RADIO, if you have an aftermarket
Radio you don't be able to do.
Turn the ignition switch to ON position,
turn OFF the RADIO,
Press and hold the Tune disp, button for 5 seconds or until
Settings is displayed,
Press the seek ptype or seek pscan up and dow to scroll the main menu,
Scroll until the OIL LIFE appear on display
Press the 1prev or 2next to scroll the sub menu, RESET will be displayed , Press the TUNE disp buttom to reset,
A chime will be heard to verify the new settings and done
Will be displayed for one second.
Press the TUNE DISP to exit from the program,
A chime will be heard to verify the exit.

OK.. I hope this help on your question.
Thank you for use fixya.

Aug 23, 2008 | 2005 Chevrolet Monte Carlo

1 Answer

Radio and cd player stoped working suddenly


the security on the radio has been tripped you need to take it to a GM dealer and have them run a code to unlock it CAL means calibrate 

Jul 04, 2008 | 2001 Chevrolet Monte Carlo

1 Answer

Confirming settings through the radio


check all your fuses and if you have an aftermarket radio make sure to have it rewired the right way, by going to an audio shop will be cheaper than going to an auto repair

May 27, 2008 | 2003 Chevrolet Monte Carlo

Not finding what you are looking for?
2002 Chevrolet Monte Carlo Logo

542 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...