Question about 1999 Chevrolet Silverado 1500

1 Answer

Sounds like change jingling front right axle area

Just changed front right axle. Think previouse owner jumped it cause there was busted axle. Some bent connection points when changing shocks. Now I have a jingle like a bag of change when i skim over a bump or something. Feel a some shifting when I move the axle.

Posted by on

  • Anonymous Mar 28, 2014

    i reverse and only move 3 feet then shakes cuz axle feel not way in i changed axle i need help

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,982 Answers

Previous owner jumped what? You have a lot of words there but what I see is your front end rattles when going over bumps and you can move the differential but don't know whats allowing movement. Have someone make it move and look to see what's moving!!! Also have someone bounce it and look for anything loose.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Grease slung on the inside front right tire


check the cv joint rubber cover and replace regrease if its busted open..

Dec 23, 2013 | 1991 Jeep Wrangler

1 Answer

1999 plymouth breeze. step on brakes and the front brakes have a bad pulsing to them. previous owner hab brakes done rotars turned and pads replaced. any suggestions on how to address this problem


Symptom: Brake Pedal Pulsates Change When: Braking Change Where: Passenger Compartment Change -->lg-bl.jpg lg-br.jpg
Priority Action Part Type Cause 1 Inspect Brake Drum Specs Brake Drum Out of Adjustment, Out of Round, or Cracked. 2 Inspect Brake Drum Unevenly Worn or Out of Round Brake Drum(s). 3 Inspect Brake Rotor Incorrectly Machined Brake Rotor. 4 Inspect Wheel Bearing-Front Incorrectly Tightened or Installed Wheel Bearing. 5 Inspect Wheel Bearing-Rear Incorrectly Tightened or Installed Wheel Bearing. 6 Inspect Wheel Nut Loose, Worn, or Damaged Wheel Nut(s). 7 Inspect Rear Axle Bent Rear Axle.

Apr 13, 2013 | Plymouth Breeze Cars & Trucks

2 Answers

My front of my car vibrates like crazy everytime I accelerate and turn right but when I let off the has it stops


Sounds like maybe a busted motor mount or transmission mount, or a worn out cv drive axle.Look under the front of the car at the drive axles there is 4 rubber boots 2 on each axle inner boot and outer boot.See if one or more of the boots is torn or split.

Jan 20, 2013 | Cars & Trucks

1 Answer

I have a 1999 Mercury Grand Marquis. i noticed a little diff fluid coming from the right rear wheel. I changed the wheel seal and axle bearing and put it all back together and filled the rear diff with...


first swap to a front tyre to eliminate that issue


new bearing shouldn't be rumbling
to get the bearing square on and home
did you use a press to fit the bearing to the rear axle
or tube method ?

and did the seal kit have this nifty plastic seal fitter so axle didn;t rip the seal surface

index-iamfpwhpnyqdk3sl3340sktr-1-0.jpg

Apr 12, 2017 | 1999 Mercury Grand Marquis

1 Answer

Chain dragging / Change jingling sound from Driver Front Side


Does this sound occur while th engine is running and the car is sitting still? Or only while driving? If so look at the exhaust pipe under the engine, there is a section that looks like flexible pipe, at either end there is a thin washer-like connector or fastner is it dangeling from the pipe, if so that is probably your noise. I had the same jingling noisre in mine and that was the problem, I just cut it off and the noise never came back. Hope this helps, let me know.

Nov 14, 2009 | 1995 Ford Escort

1 Answer

The front axle, cv joint and dic break rota


Does the sound get louder as you drive, does it start to sound like a moaning or loud wind noise? If it does the most common problem is a bad bearing that the rotor bolts to and the axle slides through.

Sep 20, 2009 | 2003 Kia Rio

1 Answer

Jingling noise? 1990 chevy k2500


If you had front disc brakes changed recently, then more than liklely someone forgot to put your anti rattle clip in with the installation. if you can stand the rattle it's not life threatning. if no brake job recently, then open the hood and look for something loose that would be rattling.

Jun 23, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Vibration/Rattling on right side during high speeds


I had a similar problem. The dealer change automatic transmission and differential, but the noise continu. After research on internet i think the problem is the front galiper who create a vibration on the disc wheel and the vibration frequence follow the front axle until interior car. Just press slowly the brake pedal and if the noise stop , that's it the cause i think. I dont change my galiper, but i have a new transmission . :)))

Jun 03, 2009 | 2002 Volkswagen Jetta TDI

1 Answer

Transmission fluid


i think the trans is every 60,000 and the front and rear gear oil may be at the same time...refer to the owners manual

Mar 12, 2009 | 2001 Nissan Frontier Crew Cab

1 Answer

Change axles on a 2003 suburban 1500


The axles are about $100 each. The short version is you must jack up the front end. Then support the car by the frame and let the suspension hang. Bust loose the lower ball joints and sometimes a tie rod. Remove the large axle nut at the center of the hub and knock the axles out of the hubs, them remove them from the front axle center section. In reality its not quite so easy, but it is do able. You can probably go to the local library and take a look at a maunal for your vehicle and get a little better idea.

Jan 16, 2009 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
1999 Chevrolet Silverado 1500 Logo

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...