Question about 2003 Volkswagen GTI

1 Answer

We inherited our son's 2003 GTI. The 'flip' key doesn't pop out anymore. While going through his things we found several new keys which come in two parts. Question is-can we take the chip out of the old key and insert it in the new key? We need to know before we break the old one.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Those keys are laser cut keys therefore you can change the chip but you have to make sure that the key you are going to use matches the old 1/was laser cut for that ignition barrel.

Posted on Jul 19, 2009

  • gtiR Jul 19, 2009

    those keys are laser cut keys therefore you can change the chip but you have to make sure that the key you are going to use matches the old 1/was laser cut for that ignition barrel.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Cant pop my trunk in my 2003 Lincoln town car key's locked in the trunk and my alarm keeps going off what do I do


You don't have an extra key I presume.
With the right documentation the Ford/Lincoln Dealer can make a new key or.
Call the Auto Club Emergency Service or Locksmith
Are the car doors unlocked? And does the back seat fold down?
(just checking on those last two things)
Does that help at all?

Apr 19, 2015 | Lincoln Cars & Trucks

1 Answer

Lost my keys to my 2003 expedition my son took key switch out put a new one but anti theft wont let it start I found the old key how can I start it


You may be able to hold the original key close to the key lock and try starting the truck with a valet key that does not have a chip.
The sensor for the chip is close to the cylinder.

Sep 11, 2014 | Cars & Trucks

1 Answer

I am haveing some problems with my fuel pump new one put it in and it still want start fined a fuse that is a 30 amp was pop put one in turn on key and still pop


Hi Perry, I'm glad to help!

First thing to do is go to the Library and pull up the wiring for your truck and find out what all goes to that fuse. Most of the time the circuit that on that fuse can go to several different thing. If it only goes to the fuel pump then see if there is a connect going back to the fuel pump somewhere at the front of the vehicle USUALLY in the finder well on the frame. Unplug that connector and see if the fuse still pop's. If it doesn't then you know the problem is in that wiring going to the rear of the truck. Find the short and fix it, most like its grounding somewhere on the frame. If it still pop's then you know the problem is in the front part of the truck, start checking frayed or damaged wiring. Unplug different thing like alternator, starter and connector and see if it goes away. Hope this helps and have an awesome day Perry.

Jun 15, 2014 | 2003 Ford E150

1 Answer

Mk4 gti vr6 has power but doesn't start, runs with pop start


Could be a number of things but may want to begin by checking wiring to starter, battery, or even the ignition switch. These components may not turn your engine light on.

Jun 17, 2017 | 2003 Volkswagen GTI

1 Answer

Ignition key will not turn.


This happens to me sometimes because the pressure of the steering lock is enough to keep me from being able to turn the key. Try moving the steering wheel while turning the key, if that doesn't work, flip the key over and try again (unless it is a one sided key), if that doesn't work, then you are likely looking at a bad lock cylinder and it will have to be replaced.

Apr 29, 2012 | 2003 Buick Century

1 Answer

2002 Pontiac Grand Prix - I put the key in and turn to start, I hear a click, then it doesn't start - in fact the entire car suddenly goes dead and the key gets stuck in the ignition. I can press the...


The first thing I would do is clean your battery connections very good. you may have to remove the plastic covers off the cable ends to get them cleaned good. Also make sure you get the connection bolts tight.

Sep 04, 2011 | 2002 Pontiac Grand Prix

1 Answer

2003 325i started to turn over slowly today, and now it does not


sounds like it might be a bad connection on the starter try jumping the starter and see if it turns over

Apr 15, 2010 | 2003 BMW 325

2 Answers

Don't have remotes anymore. Alarm keeps going


chop it out / the alarm system is wired paralel / here's a site that will help ( www.the12volt.com ) good luck

Nov 19, 2009 | 2003 Toyota Corolla

1 Answer

Having a challenge programming a 1999 Lexus RX 300 newly cut key.


did the lock smith cut key with resister in in maybee not gotta go to dealer get one cut then put old key in start car then turn of remove key put new key in turn on till security light goes out then start car

Aug 29, 2009 | 1999 Lexus RX 300

Not finding what you are looking for?
2003 Volkswagen GTI Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...