Question about 1994 Honda Accord

1 Answer

Timing honda accord

Timing honda accord

Posted by on



1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 60 Answers

Locate the crankshaft pulley at the front of the engine and remove any grease or dirt to expose the timing marks. Turn off any accessories such as the radio, climate controls and lights.

  • Step 2 Start the engine and allow it to reach normal operating temperature. The cooling fan will cycle on and off signifying it has reached the correct temperature. Shut the engine off.
  • Step 3 Connect the timing light to the battery if necessary and to the number one ignition wire located at the far end of engine on the driver's side. Restart the car and allow it to idle for 2 minutes.
  • Step 4 Point the timing light at the crankshaft pulley and determine the amount of adjustment needed. Loosen the hold down bolts on the distributor and rotate it slowly until the timing mark matches the middle line on the timing light.
  • Step 5 Tighten the distributor hold down bolts and recheck the timing to ensure it didn't move. Turn the engine off and remove the timing light. Reconnect the number one ignition wire.
  • Posted on Jul 23, 2009


    1 Suggested Answer

    • 2 Answers

    SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

    A 6ya expert can help you resolve that issue over the phone in a minute or two.
    Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
    The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
    click here to download the app (for users in the US for now) and get all the help you need.
    Good luck!

    Posted on Jan 02, 2017


    Add Your Answer

    Uploading: 0%


    Complete. Click "Add" to insert your video. Add



    Related Questions:

    1 Answer

    Why it stalls at stops and low speeds

    accord stalling on every stop. (1/2) - EricTheCarGuy ...
    The car runs good but stalls every time i come to a stop. ... a stop then it diesagain.only on the stops does the idle drop very low to the point of stalling.what ... only when I start slowing down and come to a complete stop RPM's go down and the cardies. ... The popular Honda Civic and Accord vehicles share many powertrain ...

    1998 Honda Accord loses rpm/ stalls coming to a stop ...
    Jan 10, 2013 - I just bought a 1998 4 cyl 2.3 L Honda Accord two days ago. ... 1998Honda Accord loses rpm/ stalls coming to a stop. .... Is clockwise high idle or low idle? all in all i probable rotated counterclockwide 1.5 or 2 turns. maybe this ...

    1999 Accord, 130k+, stalls when slowing to a stop - Honda Accord ... > ... > General > General Tech Help
    Mar 10, 2010 - My fiancee's '99 Accord EX Coupe 4-cylinder automatic, with 130,000+ miles, has recently (in .... No low RPM & feeling like it's GOING TO stall.

    99 Honda Accord - Strange Stalling Issues! HELP!
    My 1999 Honda Accord is having sporadic stalling problems. I've noticed a pattern. Itstalls while going slow speeds and stop and go traffic, etc. The engine just ...

    Stalling or Low Engine Idle Speed Due to Dirty ... - Repair

    Jan 02, 2016 | 1999 Honda Accord

    2 Answers

    When do I have to replace my timing belt 4 cylinder 2004 manual honda accord?

    On Honda Accord between 2002 - 2010 all they came with was an 2.4L engine, all have timing chain in them, no timing belt

    Jul 14, 2010 | 2004 Honda Accord

    1 Answer

    Change 93 honda accord timing belt. Need steps to correcly replace timing belt.

    google= how to place a timing belt on a 1993 honda accord

    Jul 08, 2010 | 1993 Honda Accord

    2 Answers

    I cant find my timing marks for my 1990 honda accord lx because the cover is slightly woren but are the timing marks on the cover or engraved in the metal? this is for the crank shaft.

    The 1990-1993 accord timing marks are located in the space between the engine and transmission. There is a rectangular rubber plug, at the top, front of the transmission housing, that pulls out and the timing marks are visible(with a timing light) through that access hole.

    May 21, 2010 | 1990 Honda Accord

    1 Answer

    I am looking 4 diagrams on changng timing belt 2001 honda accord

    how many labors hours are required to change a 2001 honda accord 2door 4 cyl timing belt and water pump?

    Sep 19, 2009 | 2001 Honda Accord

    1 Answer

    Timing chain or belt for a 2004 Honda Accord

    It depends, 4cyl. is a chain, the 6cyl. is a belt and it is an interference engine. I have not done this one yet, but Hondas are never that easy.

    Mar 17, 2009 | 2004 Honda Accord

    1 Answer

    1992 Honda Accord slowly accelerates

    Sounds like a bad timing belt. timing belt may need to be replaced,or igniting timing may be off. here is a digram if you need help with timing . Good luck and thanks for using FIX YA.

    Mar 04, 2009 | 1992 Honda Accord

    Not finding what you are looking for?
    1994 Honda Accord Logo

    221 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Honda Experts


    Level 3 Expert

    78267 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22326 Answers

    Kevin Daniels

    Level 3 Expert

    1455 Answers

    Are you a Honda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides