Question about 2005 Pontiac Sunfire

1 Answer

I have a 193 s-10 chevy and i need to know how to get the window crank off

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 521 Answers

Interior handle is eithe r held on by one screw thru the center accessed by removing the cover. (gently pryu off) or "c" clip located behind the center of the handle and would have to be pushed off with a window handle removal tool. Can be bought at an auto parts store.

Posted on Jul 18, 2009

  • Rob Bruce Jul 18, 2009

    interior handle is eithe r held on by one screw thru the center accessed by removing the cover. (gently pryu off) or "c" clip located behind the center of the handle and would have to be pushed off with a window handle removal tool. Can be bought at an auto parts store.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Chevy trying to charge me $400 to replace and program my crank sensor the labor $200 and the part $200 is that about right

To replace crankshaft position sensor you would need to pull the harmonic balancer , that takes a puller . Special tool > About one hour an a half . replacing sensor about half hour . This is depending on engine size V-6 V-8 A new crank sensor gm parts direct on the internet $42.00 . Here in PA the local Chevy dealers labor rate is $86.00 an hour .Pep boys labor rate is $115.00

Mar 14, 2016 | Cars & Trucks

1 Answer

I have a 2001 Chevy blazer windows don't work rear

If windows are electric, check switch and replace if needed.
Check window motors wiring connections. If motors are bas, replace as needed.
If manual, window could be off track or cranking mechanism may be broken. Replace as needed.
If light fuses are good, replace bulbs to the lights.

Jan 21, 2013 | Cars & Trucks

1 Answer

How do i re install the snap ring on the window crank of my 98 chevy 1500

Install ring onto window crank first then put against window shaft and smack it one time its done.

Apr 21, 2011 | Chevrolet C1500 Cars & Trucks

1 Answer

I have a 2003 chevy tahoe 71 with 97,000 miles,that cranks won't

place fuel pressure gauge on fuel rail at designated location and chek press. this will eliminate f p , also check relay and fuses labeled "crank " let me know

Apr 28, 2010 | 1989 Ford Bronco

1 Answer

I have a 2004 Chevy Express van and the window stops open at an inch or two and wont go any further. They are manual windows that had an aftermarket power kit added. I have removed the kit and even with...

The gear crank inside the window has skipped some teeth - pull the crank out and start over - that is all it can be from the way they are made - pull the gear out and just shove the window to the top - if it goes all the way to the top then you know the crank skipped like a chain on a bike - reset it and you should be good to go.

Apr 11, 2010 | 2005 Chevrolet Express

1 Answer

Driver door window on 02 chevy malibu wont go up or down window is on track and crank handle is good and working


Oct 27, 2009 | 2002 Chevrolet Malibu

1 Answer

Need a diagram of how the door panel comes off of a 95 chevy blazer. I need to remove the door panel to fix the lock assembly. Need to know if there are clips at the bottom of the door, or just the screws.

There will always be clips attached to the panel from the inside-after screw removal and window crank removal (window crank on mostly earlier models) You can start at a bottom edge with what i recommend a door panel removal tool-most auto parts store carry these. even if a clip falls out you can reinsert it.Also the door removel tool doubles as a window crank clip remover.

Sep 20, 2009 | 1995 Chevrolet Blazer

1 Answer

How do i Replace the window regulator in my 69 Chevy Pickup?


theres a special tool to get those off, theres a hidden clamp holding them on, maybe try calling the dealership or a local mechanic to find out where to get that tool, its inexpensive


Jun 26, 2009 | Chevrolet 1500 Cars & Trucks

1 Answer

Winshield wipers stay stright when you turn them off 2002 chevy impala

You need to replace the wiper crank arm that is bolted to the wiper motor. Then you need to bend the tab back up that got bent on the wiper motor bracket that the old crank arm bent. The crank arm has to hit this metal tab so the wipers will park down below the window istead of up.

Mar 06, 2009 | 2002 Chevrolet Impala

2 Answers

Door window handle

There is a butterfly clip that sits in a set of notches on the actual crank handle. you will need something small and long enough., like a mini flat head srewdriver. Push the door surface and turn the crank until you can see the ends of the clip. Now, use your screwdriver to push the clip off the crank handle. It will shoot off so keep an eye on the ground when you get it off. Hope that helps.

Jul 28, 2008 | 1999 Pontiac Sunfire

Not finding what you are looking for?
2005 Pontiac Sunfire Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides