Question about 2002 Daewoo Lanos

1 Answer

Timeing belt snapped

Witch piston is the no.1 on a lanos? where must the marks onthe top two pullies be?

Posted by on

  • francois_bot Jul 18, 2009

    no instructions with the new belt i bought

  • Rob Bruce May 11, 2010

    the new timing belt kit should have an instruction sheet in it to guide you.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Daewoo Master
  • 450 Answers

If timing belt snapped while engine was running valves are bent.number 1 cylinder is closest to these pulleys(gears).
the timing marks are for twin

timeing belt snapped - 7cc01fe.jpg

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks on toyota 2t engine


Take out no one spark plug turn engine till piston is on top of stroke check belt pully for markings if it does not line up do one more engine revolution and bring piston back to top and it should lne up with crank shaft pully.

Nov 24, 2014 | Toyota Cars & Trucks

1 Answer

Set camshaft timing


there should be marks on crank pully and cam belt pully. rotate motor until crank pully timing mark is on zero.the cam belt pully should be lined up with its own mark.number one piston should be at the top of its stroke (top dead centre TDC) and number one valves should be shut. if the cam belt mark is not alined with its own mark remove the belt realine the marks and refit the belt

Sep 15, 2013 | 1993 Subaru Legacy

2 Answers

Need to know timing marks?


there should be two lock off points on the pullys but possibly on the timing cover or cylynder head or you can just take the plugs out and get the piston 1 and 4 top dead centre firing order is 1342 with 1 nearest the pullys but make sure you dont move the top pullys on the head when you take the belt off or youl bend the valves on the head

Jan 23, 2011 | 1992 Toyota Tercel

1 Answer

How do i time my Golf 1 correctly? it consumes a lot


its tricky enough if your not sure what your doing but ill run you through it. 1. remove top rocker cover and timing belt cover. 2 make up the position of the pully on the cam shaft at the top and the drive shaft at the bottom, this marks are you fail safe incase you cant time the engine. 3 remove the timing belt and pully tentioner, note if your going this far you are as well to replace the timing belt,tentioner and water pump. 4 On the cam shaft at the top if you force them to turn you will see a small indicator mark on the shaft this mark has to line up with the other indicator mark on the housing between the cam shaft and the cam shaft pully, once they line up your top end is timed, mark up the pully incase it moves. 5 on the drive shaft pully there is also markings that have to line up but you can also feel the position of the pully as you turn it, you will feel the piston been forced up and it is timed at top dead centre on cylinder one, which means the the piston has to be at the top just before the point of returning back down, using your feeling as a guide and the markings lined up you will have timing. also mark up this pully, your new marking should be very very close to the fail safe markings you put on at the start. when you have your marking replace the timing belt with the longest distance between pully contact going on first, try not disturb your timing or your hard work will have been for nothing, make sure the tentioner on the belt is tight but not to tight to the point where you ll stretch the belt or snap it, put everything back as you found it and crank the engine, job done, best of luck. hope this helps( rate me on my answer thanks )

Aug 27, 2010 | 2000 Volkswagen Golf

3 Answers

Timing marks and aligning timing belt


the marks for th cams are on the tin stuff behind the gears study it for a bit and nyoull see them the mark for the crank pully is on the case onthe bottom of the crank pully just of to one side

Feb 27, 2010 | 1995 Nissan Pathfinder

1 Answer

Timing belt snapped on a 1.4 lanos,will it need a


Just a new belt--the valves on gas engines do not hit the piston like on diesel(this is because diesel has very high compression)

Jul 11, 2009 | 2001 Daewoo Lanos

2 Answers

How to line up no1 cylinder on TDC on 1998 Daewoo Lanos SOHC. Have got the cam sprocket on its correct marking, but the crankshaft pulley has only pick up coil on it no timing mark Thanks John Gold Coast...


Ibring piston to compression stroke. Apiece of tissue in the plug hole will blow out and then turn crank by hand until the piston is at the top. There should be timing mstks on the crankshaft pully.no timing marks? Then ease the crank around untill the piston starts to go done you can feel the piston with a straw. Note, the crank pully keyway more than like be at the 12 oclock position. good luck

Jun 09, 2009 | 1999 Daewoo Lanos

1 Answer

Timing Belt on Passat 2004 2.0 Petrol


should be on the pully wheel if you cant find them bring number 1 piston up to the top dead center and mark on pully

Nov 28, 2008 | 2004 Volkswagen Passat

1 Answer

Snapped timing belt on 1.8t audi tt engine. Belt snapped not possible to mark bottom pully. help


just fixed my Audi TT ... timing belt snapped so the head had to come off to replace valves. used dial guage on top of piston !
if head is on then there is a plug you can remove that allows you to see top dead center..

Jul 14, 2008 | 2002 Audi TT

Not finding what you are looking for?

Open Questions:

See all 2002 Daewoo Lanos Questions

2002 Daewoo Lanos Logo

Related Topics:

361 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8732 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...