Question about 1996 Ford Explorer

2 Answers

Engine turns no gas going to front of engine replaqced relay fuses and fuel filter

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 44 Answers

IT sounds like the module or fuel pump.

Posted on Jul 20, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 103 Answers

CHECK INERTIA SWITCH OIR FUEL PUMP PWR. POSSIBLY PUMP IS DONE. CAN YOU HEAR A BUZZ IN TANK ON KEY CYCLES?

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1999 chrysler 3.5 lhs fuel not going to injectors


Then your fuel pump is not working, or your fuel filter is blocked. You will probably have to check your fuel pump circuit if you have no fuel pressure in the fuel rail, where the injectors sit. There is a fuse for the pump, usually in the under hood fuse/relay block. That is probably also where the fuel pump relay is located. You should hear or feel this relay click when the ignition key is cycled from off to on. Also, when the key is turned to on, you should hear the fuel pump in the gas tank turn on for about 2 seconds. This will put the pressure in the gas in the fuel rail, for starting the engine. If you don't hear the pump turn on for that 2 second period, it is probably a bad fuel pump. But know the fuse is good first.

Sep 25, 2015 | Chrysler Cars & Trucks

2 Answers

Chevy 2001 Cavalier won't start


Trace the power source from fuse to relay etc and make sure pump is working. if all checks out then check pump working and for preasue at engine. you may have a dammaged fuel line from the tank which would also cause the same problem

Nov 27, 2012 | 2001 Chevrolet Cavalier

1 Answer

I shut the engine off. tried restarting, failed to do so, seems like not getting fuel. Is there a fuse for the fuel pump. It was on empty and I did add 1.5 ga gas


When you shut the engine off then it was not out of gas and there is a fuel fuse in the fuse panel and a fuse relay in the engine compartment. The fuse and relay box is always near the battery. It sounds like by the information I gathered so far is the fuel pump was sucking most of bottom gas which is always dirty gas and probably plugged the fuel filter. Make sure the to have someone listen if the fuel pump works by listening under the fuel tank while the ignition is turned on but not the starter.
1. Listen for a humming noise near the tank while someone turns the key on.
2. If the fuel pump makes is on then its your fuel filter.
3. If no sound then its your fuel pump. Start with the fuses then your relays and if they are all in working then its time to change your fuel pump.
( note: sometimes its just the way the car is sitting and tilting where all the fuel is unreachable for the pump and you might have to put more gas.) Hope this works. Cam

Oct 19, 2010 | 1997 Oldsmobile Aurora

2 Answers

Car is not getting gas to motor even after new fuel filter is installed


If you change the fuel filter and still not getting fuel to the engine, then the other possible problems are:
- Clogged fuel lines due to 'dirty' fuel.
- Defective Fuel Pump which may not provide enough pressure to 'push' the fuel pass your new filter.

Hope it helps.

Sep 26, 2010 | 1990 Toyota Corolla

1 Answer

Gas not getting engine(flter or pump)


Sounds like the fuel pump and filter. Spray starting fluid in throttle body if cars starts the its your fuel pump and fuel filter.

Oct 29, 2009 | 1998 Ford Crown Victoria

2 Answers

Where is the fuel filter located on a 1992 cadillac seville? my car wants to start, but no gas is getting to the air breather? make sense.


Unless this problem has been slowly creeping up on you, I'm going to say you need to look at the fuel pump too.

Under vehicle, driver side, below seating area, near fuel tank, mounted on frame rail in fuel line
Go to:
www.autozone.com

Get an account and use the repair manuals that they provide, will help you find things and give you good troubleshooting guides.

Sep 06, 2009 | 1992 Cadillac Seville

1 Answer

No power from fuse to fuel pump


check in trunk for a fuel cut out switch, it shuts down fuel flow in case of an accident

Feb 15, 2009 | 1996 Saab 9000

1 Answer

No power from fuse to fuel pump


fuel pump works fine but gage isn't working any one got any idea?

Oct 12, 2008 | 1994 Saab 900

2 Answers

The engine will turn over but will not crank.


use an ohm meter to make sure you have power going to the fuel pump.

May 23, 2008 | 2003 Kia Optima

Not finding what you are looking for?
1996 Ford Explorer Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...