Question about 2003 Jaguar X-Type

1 Answer

My brake lights are no longer working on my 2003 Jaguar X type. What fuse number would be associtated with them?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 76 Answers

Most of the time if the brake lights don't work,
it's will be the switch on the brake pedal. You will find it under the dash where the brake pedal is. all it is a small button will two wire coming from it.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuse number for a 2003 s type jaguar airbag


The airbag system does not depend on a fuse, the power come directly off the ECM, the battery MUST be disconnected when working on the airbag system. The only fuse involved in part of this system is fuse #5 in the passenger compartment fuse box. It should be a 10 AMP mini fuse, red in color and that just protects the occupancy sensor and the passenger airbag de-activation lamp.

Jun 27, 2014 | 2003 Jaguar S-Type

1 Answer

Where is the fuse for the upper brake light on a 2003 jaguar S type?


All fuses are listed in the owner's manual. If you don't have one please try eBay for a used one.

Oct 27, 2012 | 2003 Jaguar S-Type

1 Answer

How do you set up electric hand brake after fitting rear pads?(appears to be binding on).on s type jaguar.


Bulletin from Jaguar :

Electronic Park Brake (EPB)
Re-Calibration Procedure
2003 MY-ON
S-TYPE
M44998-ON

Issue:
On some 2003 MY-on S-TYPE vehicles, a customer may report a concern of premature
parking brake pad wear or the brakes binding. This condition can result if the electronic
park brake (EPB) system is not re-calibrated after the removal of the rear brake callipers
to replace the brake pads.
Action:
Should a customer express concern regarding the above, refer to the calibration
procedure detailed in this bulletin.

1. Reset the EB module:
a. Switch off the ignition.
b. Disconnect the battery for 30 seconds. For additional information, refer to STYPE
Workshop Manual Section 414-01.
c. Reconnect the battery.
2. Start the engine.
3. Firmly apply and release the foot brake five times.
4. Confirm that the message NOT CALIBRATED" or APPLY FOOT AND PARK
BRAKE" is displayed on the instrument cluster message center. This indicates that
the parking brake is in calibration mode.
5. Lightly press the foot brake pedal.
6. Apply the parking brake by using the EB switch.
7. Release the parking brake.
8. Release the foot brake.
9. Confirm that the brake warning lamp is no longer illuminated on the instrument
pack and that the NOT CALIBRATED" message is no longer displayed in the
message center.
10. Apply and release the EPB five times to ensure no error is present.
_____________________________________________________________________________

NB: It is also possible the actuator is bad though.

Jan 17, 2011 | Jaguar S-Type Cars & Trucks

1 Answer

2004 x-type jaguar stuck in park after tail light problem . Simple brake light replacement turned into a nightmare. Scared to have the car towed.Can,t afford to have a jaguar tech come out, We're screwed....


Check the brake light fuse. If you blew a fuse for a brake light, you won't have power to the shift interlock which allows you to move the shifter.

May 19, 2010 | 2004 Jaguar X-Type

1 Answer

My car will not shift in to gear.


Check your brake light fuse. Some vehicles will not allow the car to be shifted out of park unless the brake lights are working.

Good Luck

Oct 16, 2009 | 2003 Jaguar S-Type

1 Answer

I changed to brake light bulb in my 2003 x type and cannot get in reverse


Hi

Please check for the fuse in the fuse box .If they are fine then check the wiring of the brake light bulb.

Mar 04, 2009 | 2003 Jaguar X-Type

2 Answers

I cahnged the light bulb to my parking lights and


May Have Blown A Fuse Due To Installing The wrong Bulb .check the brake lights If they dont work May Have Blown A Fuse And Disabled The Shift Interlock At The Shifter Try To Put The Car In Nutral With The Key Off Then Start The Car And See If The Car Goes In Gear

Mar 04, 2009 | 2004 Jaguar X-Type

1 Answer

Rear Brake Light


Hi

In the trunk, just un clip the light cluster, twist out the bulb, and renew the stop bulb, refit the light cluster.

Good Luck !

John.

A FixYa rating would be appreciated please !

Feb 07, 2009 | 2003 Jaguar X-Type

Not finding what you are looking for?
2003 Jaguar X-Type Logo

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...