SOURCE: 2006 Ford Five Hundred -- Where's the fuel filter?
right rear just in front of wheel. push clips back and remove old filter. apply new filter insuring flow is correct direction by arrow on filter press the clips back in place and you are ready. check to see if it is leaking.
SOURCE: Backup sensors not working
using a mechanics stethoscope..you can listen to the sensors...listen for the weakest sensor and replace it...the sensors make a faint ticking noise when listened to..the faulty sensor will be noticeably different sounding than others...of course the key need to be in on position and in revers (be careful not to run you self over!)
SOURCE: locating and replacing a camshaft sensor in a 2005 dodge neon
this is a very very simple procedure. you do not need pics. there is a sensor located at the end of the engine on the far side from the belts. at the top. it has a plug with two wires in it. just remove the two 10mm bolts un hook the plug and reverse the process to reinstall. if you have a factory intake you may have to remove it to access this sensor. just the intake tube.
SOURCE: 2005 ford five hundred
If the check engine light stays on when your engine is running, your onboard computer has detected a fault in your emissions system. You need to have it hooked up to a code detector to find out what the problem is. If you are near an Autozone or Advance auto parts store they will usually do that for free. Here is where your search begins. Most of the time the code for "engine lean" will show up. That means you are getting too much air into the intake manifold. Excess air gets in through vacuum tube leaks, intake gasket leaks, faulty EGR, and PVC valves and sometimes valve stem seals, There are also a variety of other codes that may indicate faulty oxygen sensors, catalytic converter, fuel evaporative system. It is too expensive to just start changing parts and hoping you get it the first. It is important to get the codes that are stored in your onboard computer first.
SOURCE: CLICKING NOISE FROM RIGHT DASH
Air/Blend Door Actuator Modual is defective: See info below
Description :
Temperature Actuator
Attributes :
Controls the blend of hot & cold air
Make :
Ford
Brand :
Dorman - OE Solutions
Application Notes:
Please select Detailed Applications
for Application Note information.
754 views
Usually answered in minutes!
×