Question about 1983 Ford Fairmont

1 Answer

I have a fairamont with a 6 cylinder if i swap it for 302 will i have to swap the transmission as well

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

Is it a v6 or straight six? The 302 should bolt up to the trans. but if the engine is a straight six you will need a different k member. I hope this helps.

Posted on Jul 20, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1960 mercuey comet trans not shiftting after engine swap my 6clinder


Did you hook up the vacuum modulator on the transmission to the correct vacuum port on that Mustang engine?

Mar 27, 2014 | 1966 Ford Mustang

1 Answer

I swapped the original 6 cylinder out of 1960 comet for a 1965 mustang 6 cylinder now the trans is not shifting did i miss something


Well you could have missed the vacuum line that goes to the modulator on the transmission. It has to get unrestricted manifold vacuum. Also, the throttle valve linkage from the carb to the transmission may be off or just missing a return spring. Give a good look around and I'm sure toy'ii find one of the two.

Mar 27, 2014 | 1999 Ford Falcon

1 Answer

Transmission diagram for a 91 fordf150 4x4


No the bolt spacing is different you will have to find a bell housing for a 302 or 351c. The spacing on a 351 modified is also different. Hope I helped.

Apr 12, 2013 | 1991 Ford F150

1 Answer

1990 f150 302 4X4 transmission swap


just check the bolt pattern, may have to swap bell housing. should be same i would think though

Aug 04, 2012 | Ford F-150 Cars & Trucks

2 Answers

I have an 84 mustang that came with a 4 cylinder. What would be required to go with either a 302 or a 351 V8? Will it take more than changing motor mounts?


Everything will need to change eas far as engine, transmission, and most likely rear end.A 302(5.0) swap would make more sense because they came in these cars and there will possible be some factory brackets and other things availiable. When you say 351 i am assuming you mean windser. This engine is in the same family as the 302 but thats about all they share. It has not been in a mustang since 72 or 73 and those were much different cars. If i wanted a 5.0 stang i would just buy me one. this will be a very expensive project and there will be many unforseen problems.

Jan 30, 2011 | 1984 Ford Mustang

1 Answer

1999 grand prix gt 3.8v 6 error codes 300 and 302


The PO300 code is random/multiple cylinder misfire detected. Sinsc you have the code PO302, that means that cylinder 2 is the one misfiring, usually a bad coil pack, or spark plug.

May 12, 2010 | 1999 Pontiac Grand Prix

1 Answer

I have a 1987 ford f-150 with a 302. I would like to put the 302 into a 1989 ford f-150 that is four wheel drive that currently has a 4.9 in it. would there be any problems with doing this.


302 is a 5.0L v8 engine and 4.9 is a 300ci, 6 cylinder. so you may have problem with transmission, exhaust manifold, motor mounts, vacuum lines/hose, radiator, power steering pump, a/c system, and mostly wirings. not to mention there is a computer in those trucks!

Apr 21, 2010 | 1989 Ford F 150

2 Answers

I want to change my 4.9 6 cyl to a 302 v8 1990 150 ford


A donor truck is a good idea, but the transmission, bell housing, cross members and transmission mounts will all be the same as long as you dont go from manual to auto or opposite. motor mounts will be different tho. i put a manual trans off of a 94 F-150 with a 300 6-cyl into my 91 bronco with a 351 V8 (5.8L) and used all the mounts and crossmembers off of the 94. only thing is the petal assm was different due to body changes. and the 5.8L also has a 11" clutch **** and the 5.0L and 4.9L both use a 10" disk. the bad thing is you will have a ton of stuff to change like the ECU, and engine harness and and other then the Ypipe and converters the exhaust will work. such a project is not for the faint of heart.

Feb 01, 2010 | 1990 Ford F150

2 Answers

Firing order for ford 302


the engive is a v so here is the engine numbering also can be found on the intake manifold embossed on the intake of each cylinder
1-5-4-2-6-3-7-8
4 8
3 7
2 6
1 5

Oct 17, 2009 | 2004 Ford F150

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...