At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Buy valve cover gasket kit with plug tube seals .. remove valve cover.. Clean everything .. replace seals replace valve cover gasket and reinstall valve cover. Clean sparkplug wires connectors.. Try Rockauto .com for this part about $25. about 1/2 price of local auto parts store. Tighten Valve cover screws to correct torque specs.. for best job.
you must replace the spark plug tubes seals along with new valve cover gasket. Remove the valve caver and flip it over , remove and replace the old tube ring seals with new and replace valve cover gasket the reinstall and tighten down.
You have to replace the valve cover gasket and seals. The cover has to be removed to access the seals. Not a hard job. Gasket set w/ seals around $25.00
Sparkplug tube seals are leaking. You will need to remove the valve covers and replace the valve cover gaskets and the round seals in the middle of the cover. the tube seals should come with valve cover gaskets.
Yes, you need a Rocker cover (valve cover) Gasket kit. Remove the valve cover, remove all old O-rings and cover gasket, clean grooves and mating surfaces without gouging or scratching them, put the new gaskets on as per factory recommendations, tighten to the proper torque and you're done. The spark plug holes in the cover are part of the valve cover gasket kit. Any Napa, Car Quest, Pep Boys, Auto Zone will have it.
Buy the package that come with valves cover gasket and 4 spark plugs tube seals. Its around $10 - $20 and for replace it only remove the pcv valve tube, the sparks plugs cables and ignition coils. Its so easy!! remove the valves cover, only have 10 screws. Try to buy original Plymounth gaskets or Felpro.
1.your valve cover's spark plug chamber seal is leaking. Which requires removing the valve covers and replacing the gaskets and seals. 2. Excessive oil spills on to the valve cover and ignition coils when adding oil.
**This excess oil on the plug boots can cause the coils to short and eventually fail.
Usually this is due to the spark plug tube seal allowing oil to escape from under the valve cover down the tube. You will have to remove the valve cover and replace the seals. You might consider replacing the valve cover gasket at the same time.
×