Would Any other car makers,camshaft fit a 93 acura vigor 5 cyl

Sorry we have no way to look that up here.

Are any internal distributor parts damaged? Are they all in good working order? If not, something external to the cap is melting the distributor cap, although that item should be able to withstand NORMAL temperature operations under the hood.

This engine comes out with the trany from the top, as far as engines i think a few are interchangeable from acura.

Drivers side of engine under the air intake throat. ( stand next to front tire on drivers side and reach under the round intake. You cannot see it but use your hands towards the passenger side. This is on the 5 cyl engine)

SORRY TO SAY YOU NEED CHILTON IMPORT MANUAL OR HAYNES MANUAL. YOU NEED TO LOOK AT HEAD TORQUE SEQUENCE.AND THE TIMING BELT AND CAMSHAFT SPROCKETS CRANKSHAFT TIMING MARKS.YOU HAVE RIGHT MANY THINGS TO REMOVE TO GET CYLINDER HEAD OFF.THATS WHY REPAIR MANUAL WILL BE VERY HELPFUL.

whats your question?

Remove the radio and write down the SERIAL NUMBER and MODEL NUMBER. Go to your nearest Acura dealer with those numbers.

check your 02 sensor mine does the same thing

The front brake rotors are press fitted to the front wheel bearings and are removed from the car with a special tool (puller) or can be seperated by removing the whole assembly and placing it in a press to seperate them. You may damage the bearing if not done right.

You might need to replace your starter.