Question about 1999 Chevrolet Venture

2 Answers

99 CHEVY VENTURE HOW TO GET AT AND REPLACE DRIVER SIDE ACTUATOR TO OPEN AND CLOSE DOORS.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

  • Expert
  • 159 Answers

Here's a great video that will show you how to replace your door lock actuator.">

Posted on Feb 16, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 87 Answers

Remove the driver side door panel - follow rod from manuel lcok switch to door lock actuator - actuator will be either riveted or bolted to window regulator. Remove bolts and/or rivets and replace. This is not an easy job.

Posted on Aug 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The electric sliding door on my 2001 Chevy venture will not stay closed when the power switch is no


Both sides have their own modules. They are behind the panels right beside the middle seats. Remove the back seats (if you have third row seating) Pull the panel (they pop off). Either replace the module or disconnect it and manually open and close the side door.

Oct 10, 2014 | 2001 Chevrolet Venture

1 Answer

Where is the left blend door actuator located on my 2009 Chevy Suburban?


should be in the center part of the dash look under from the drivers side floor board close to accelerator pedal looking up should be mounted on the side of heater a/c box

Sep 09, 2014 | 2009 Chevrolet Suburban

1 Answer

My 2003 chevy venture power door will only close half way. how do I fix that


Look too see in the bottom of your door track to see if there's something stuck in there

Apr 21, 2014 | 1997 Chevrolet Venture

1 Answer

99 mercury mountaineer door opens but won't lock on driver side. all other doors lock. What can be wrong?


The lock actuator is broken. Seems as if it went out in the unlock position. So you cant lock it. Replace the actuator and you will be able to lock it again.

Mar 07, 2014 | Cars & Trucks

1 Answer

The driver side door on my 2002 chevy blazer wont close.how do i fix it?


Door pins are a common failure on that series of Blazer/S10's. Also, another point of contention that the door faces is a sticky latch. Basically, the door latch re-latches itself and when you shut the door into the catch, it slams into it and bounces off. An easy fix is a 3 part cocktail of brake parts cleaner. Open and shut the latch with a screw driver acting as the catch and your interior door handle a few times. P'Blaster, open and shut the door a few times with the screwdriver acting as the catch. Finally, a good shot of white lithium grease. Open and shut the door with a screwdriver as the catch several times. Once you feel it is un-stuck, actually close and open the door several times. If you notice the door rising every time it catches, you MUST replace the door pins (cheap fix). If the door still has issues, replace the door latch (and since you're in there, do some PM and replace the actuator as well).

Apr 08, 2012 | 2002 Chevrolet Blazer

1 Answer

Driver side door on 1995 chevy express van will not shut


Chances are the door latch has closed without the door being closed.

Inspect the latch mechanism on the door. I suspect you will find that the latch is in the closed position.

Use a screw driver to take place of the normal jam pin in the latch apply tension ( like the tension that would be present normally opening the door) and actuate the door handle.

Make sure to lubricate once you do get the latch to open.

Jan 17, 2010 | 1999 Chevrolet Express

3 Answers

Venture van power door problem


It sounds as though one of the proximity sensors is faulty. Also try giving the tracks for the door a good shot of white spray lithium grease. The door may be binding enough so that the emergency reverse is kicking in.

Jul 30, 2009 | 2003 Chevrolet Venture Passanger

2 Answers

Power locks and mirrors out. Driver power window out.


Your chevy uses two fuses for the system. The power lock actuators are on the 15 amp fuse inside the truck. The fuse for the switches (locks and mirrors) are under the hood. For 99 to 04 (I think those are the years) there is a TSB on replacing the 3 amp fuse under the hood with a 5 amp fuse because this is a well known problem of having these blow.

Your drivers side window is a different issue. If the rest are working your problem is in the motor or getting power to the motor. The wires that go from the body to the door often crack and break with the opening and closing of the door.

Dec 10, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
1999 Chevrolet Venture Logo

552 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...