2011 Hyundai sonata Crankshaft position sensor- location

Videos here

https://www.google.com/search?q=crankshaft+position+sensor+located+on+my+2001+Hyundai+Sonata+V6

Picture here

https://www.google.com/url?sa=i&url=https%3A%2F%2Fellagracebranch.blogspot.com%2F2020%2F07%2Fcrankshaft-position-sensor-2004-hyundai.html&psig=AOvVaw3aJBa_W6lB4gUvlvrvROeD&ust=1614879069025000&source=images&cd=vfe&ved=0CAIQjRxqFwoTCMDS3rvTlO8CFQAAAAAdAAAAABAD

..

Watch the video of the replacement job 2004 Hyundai Sonata Optima V6 2 7 crankshaft position sensor location and...

Generally on the santa fe it is located just behind the crankshaft pulley/harmonic balancer (the pully lowest in the engine compartment driven by the drive belt).

Not sure if this will help as it may be the exact model of your car
2006 Hyundai sonata crank sensor removal

follow this link for a u-tube video , it is a lot of work and there must be an easier way but i've not found it yet
Crank sensor 2000 Sonata

on the 2.7l the crank sensor is above the stater motor. On the 2,4 it is behind the timing cover.

In the factory manual this code translated to a erratic signal from the Crankshaft Position sensor. I would check the connector to the sensor first and the wiring as well. The sensor is located above the crankshaft front pulley under the timing belt cover.

My online Sonata manual shows these possibilities, but does not identify which applies specifically to 2000 Sonata.
Also, when you talk to the dealership parts counter, you'll need to know whether your 2000 Sonata is (a) 4-cylinder 2.4L MFI DOHC engine, or (b) 6-cylinder 2.5L MFI DOHC engine.
Its easy to tell - just count your spark plug wires.

-- begine excerpt from 2000 Hyundai Sonata Repair guide --

The crankshaft position sensor is located next to the flywheel.
The crankshaft position sensor is located next to the flywheel/torque converter.
The camshaft position sensor is located on the engine near the timing belt cover and under the upper radiator hose.
The crankshaft position sensor is located on the driver-s side of the vehicle, down by the lower radiator hose.
The crankshaft position sensor is located on the engine near the crankshaft pulley.
The crankshaft position sensor is located at the front of the engine near the timing belt.

--- end excerpt from 2000 Hyundai Sonata repai guide ---

U uvicasion del crank shaft position sensor

hi,
i have attached the image, showing the position of crankshaft position sensor.hope its helpful for you. Please rate my solution as helpful.have a great day.