Question about 2002 Toyota RAV4

1 Answer

2002 Toyota Rav4 remove door panel

Need to remove the door panel to replace the side view mirror, but having removed the screws does not seem to loosen the door pannel. How do I do this?

Posted by on

  • Anonymous Mar 31, 2014

    need help please

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

There are some hidden screws around the door handle but you get under the panel and yank hard to pop the fasteners. Also remove the black piece behind the mirror. Alot of times it is seperate. 3 screws behind that and the connector and you are done.

Posted on Jul 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change passenger side mirror on 2011 Toyota Rev4. Do I have to remove door panel?


dont remove the door panel just the cover inside car where mirror is then will get to the mirror bolts/screws

Oct 20, 2014 | 2011 Toyota RAV4

1 Answer

How do I replace a side view mirror, passenger side on a 2001 Toyota Avalon XLS?


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then the cover for the mirror housing should pop off and you just need to remove the bolts holding the mirror on

Aug 16, 2009 | 2002 Toyota Camry

1 Answer

How to remove side view interior mirror control switches


You need to remove the door panel. there are 2 t-25 screws behind the pull handle (some models do have only one screw) as well as you must remove about 9 push buttons. then the door panel will pull away from the door itself then you can get to the mirror switch

May 13, 2009 | 2002 Volvo S80

1 Answer

Replace 2007 Toyota Rav4 super sport passenger side door mirror


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Need to remove the right front door panel of a 2007 RAV 4


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Mar 19, 2009 | 2007 Toyota RAV4

1 Answer

Removing interior door panal w/o breaking it


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Mar 16, 2009 | 2002 Toyota RAV4

1 Answer

INSTALL SIDE VIEW MIRROR ON A 1997 TOYOTA CAMRY


Yes, you have to remove the door panel.

Remove the 2 plastic protectors on the front edge, and remove the 2 brass colored screws. Next, remove the push pins from the latch side. Push in, and pull out the whole thing. Next, under the armrest, remove the screw. Lift up the power windoe control, being careful to not break the plastic retainer tab. Remove the screw under the window control. Starting at the bottom, pull out the panel, and, when all of the clips are loose, pull the panel straight up. It is best to do this with the door panel as warm as possible, like in a heated garage. Doing this outside in the cold will break all of the plastic retainer clips; they are quite brittle whn cold.

I hope this helps

Thanks for choosing FIxYa for assistance. A FIxYa rating (4 blue diamonds) would be greatly appreciated.

Feb 23, 2009 | 2002 Toyota Camry

1 Answer

Replacing driver side mirror


Take off side door panel, screws securing it are revealed, unscrew screws remove them and and the mirror drops off. If the wing mirror is on the bodywork, then the screws should be either in the wheel arch or under the bonnet.

Feb 11, 2009 | 2006 Toyota RAV4

1 Answer

Replace passenger mirror


  1. Remove the door inside handle as follows:
    1. Remove the screw and slide the handle forward.
    2. Disconnect the handle from the control link and remove the handle.
  2. Remove the door trim as follows:
    1. Remove the 2 caps and 2 screws.
    2. Using a screwdriver, remove the door trim upward then disconnect the connectors.
    3. Using a screwdriver, pry the forward of armrest panel and remove the panel.
    4. Remove the 2 screws and tweeter speaker.
    5. Disconnect the connector, remove the 5 screws and speaker.
    6. Disconnect the wire harness and remove the 2 grommets and service hole cover.
  3. Remove the cover and disconnect the power mirror connector.
  4. Remove the 3 nuts and outer rear view mirror.
To install:
  1. Installation is the reverse of the removal procedure.
  2. Tighten the mirror nuts to 8 Nm (71 inch lbs.).

Good luck...

Nov 11, 2008 | 2002 Toyota Tacoma

3 Answers

Replacing RH Side view mirror on a 2006 Toyota Sienna


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jul 29, 2008 | 2006 Toyota Sienna

Not finding what you are looking for?
2002 Toyota RAV4 Logo

1,222 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...