Question about 1992 Honda Accord

2 Answers

Need to get to the heater blower behind the

Need diagram, or instructions to get to the heater blower behind the glovebox in my 1990 Honda Accord.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Remove the screws on the glove box, then on the side of the dashboard you will see two caps. Remove the caps and you will see two nuts that you have to remove. once you have removed the bolts, you can remove the straps on the blower and evaporator. once you remove the straps have some one help you lift the end of the dashboard up carefully to give you room to remove the blower. and disconnect the connectors. You will have to play a little bit to remove because of the tight space.

Good Luck

Posted on Jul 22, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 164 Answers

If you need pictures figure out what what go dealer as for print out pictures of year make model of your car to figure the process remove it Hanes book might have some insturctions and pictures also

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace blower motor 1990 camry


I've changed 3. Two in Camry's and one in an Accord. You HAVE to remove the glovebox and everything that goes behind it. the Unit is huge. Also the carpet will come into play as you are in the final stage. Don't forget about the bolts in the dashboard. You have to open the passenger door to see it or them. Sometimes they are behind an air vent to.

Jan 13, 2013 | 1990 Toyota Camry

1 Answer

My heater blower dosent work uless i hit a bump or something and if i hit a bump it gose back off


This is often caused by a lose cable to your blower motor or your blower could be going bad. You can this by removing the cover underneath the glovebox. This will give you access to the blower and harness.

Nov 08, 2012 | 1991 Honda Accord

1 Answer

1991 honda accord heater hose diagram


I have a 1993 honda accord ex that leaking water behind engine near my oil filter it was leaking water above it How do I fix the hose show me how

Nov 29, 2011 | 1991 Honda Accord

1 Answer

I have no power to my heater on a 1997 honda accord


Then you must get wiring diagrams for your heater blower circuits and trace the circuits to find out where the failure is. If the motor was/is bad, there is a good chance that the fuse is blown.

Nov 27, 2011 | 1997 Honda Accord

1 Answer

I have a 1994 honda accord lx..heater fan was makin funny noises for a while..then stopped working..started working and stopped again..Is it hard to replace..could it be a fuse..I;m a girl..could I do it...


The heater fan is on the right side floor board under the dash. It is a little tough to do but not extremely hard. If the blower was making noise, it could be something in the heater housing. If it is starting and stopping it is probably the blower motor. When replacing the blower motor you may have to remove the fan from the motor depending on where you buy a new one. The fans (usually made of plastic) break very easy. If you attempt this, be very careful in removing the fan.

Under the dash on the right side you will have to lay on the floor and look up. There may be a lower dash panel to remove. The motor is just below the glovebox. Removed the wire, remove the bolts/screws attaching the blower to the housing. Remove the blower.

Dec 29, 2010 | 1994 Honda Accord

1 Answer

Need a wiring diagram for the heater blower


i have pdf file for your 95 accord blower motor but not sure how to post it?

Dec 13, 2010 | 1995 Honda Accord

1 Answer

Belt Routing Diagrams


Look underneath the hood of your 1990 Honda Accord for the correct belt routing diagrams, the diagram is a sticker and it shows all of the routing. Click on the link below to view diagram:

http://www.2carpros.com/car_repair_information/year/1990/make/honda/model/accord/1990_honda_accord_drive_belt_routing_diagram.htm

Sep 14, 2010 | 1990 Honda Accord

1 Answer

Need to change waterpump...timebelt driven..need timing marks for top dead center {tdc}


Click on the following free direct Link. It has the Timing: Belt and Mark Diagrams for your 1990 Honda Accord. Plus additional Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1990/make/honda/model/accord/1990_honda_accord_timing_belt_diagram_marks.htm

Jan 11, 2010 | 1990 Honda Accord

1 Answer

Need to replace blower motor on 1990 honda accord ex


It's above the pass side floorboard, kind of behind the glove box, but lower. You'll need 8mm or 5/16" socket. Loosen the bolts, lower it and unplug it, pull it out. Don't throw it away, sometimes you have to keep your fan blade when you buy a new one. A junkyard will give you one with it still on...

Sep 28, 2009 | 1990 Honda Accord

1 Answer

How do i pull out a faulty heater blower motor from behind glovebox in 91 accord?


For Pictured Detailed Innstruction see Bottom of Page


BLOWER UNIT REMOVAL
  1. Remove the glove box.
2. Remove Glove box FRAME
3. Pull back the carpet and remove the kick panel. Remove the control unit bracket mounting nuts (4). Disconnect the connectors (5) and remove the control unit and bracket.

  1. Without A/C:
    • Remove the self-tapping screws (3) and remove the heater duct.
    • Remove the blower (3 nuts).
  • If the car has A/C, remove the blower unit according to the sequence shown
  • BLOWER MOTOR REPLACEMENT
    Refer to illustration for blower unit disassembly and reassembly, noting the following:
    • Before reassembly, make sure that the air door and linkage moves smoothly without binding.
    • When reattaching the recirculation control motor, make sure its positioning will not allow the air door to be pulled too far. Attach the recirculation control motor and all linkage, then apply battery voltage and watch the recirculation control door movement. If necessary, loosen the holding screw and move the recirculation control motor up or down
    • CONTROL ROD ADJUSTMENT
      Connect the recirculation control motor connector to the main wire harness and turn the FRE/REC switch to "REC". Hold the air door closed, then connect the control rod to the clip on the arm.
    • Email Me at the nickkname shown here >>rejakwilson @aol.com

Jan 18, 2009 | 1991 Honda Accord

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

197 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...