Question about 1993 Buick LeSabre

1 Answer

What tool do I use to change brake pads - 1993 Buick LeSabre

Posted by on

  • yadayada
    yadayada May 11, 2010

    common hand tools is all.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 138 Answers

Use proper sized socket to take out 2 bolts holding caliper on. Lift caliper up to remove. Open brake reservoir top and use old pad and large c-clamp to compress cylinder back in fully. Put squeek-stop on back of new pads and install the way you took them off. Remember where the wear bar on the pad was.Little metal tab on pad. Bolt it back on and you should be good to go. Shouldn't have to bleed system.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What tools do i need to change brake pads on 2005 yukon xl


Jack, wheel wrench, socket set, large screw driver, pair of pliers or grips. Lithium grease for the pins. Watch all of these videos. .spell{font-size:18px}.spell_orig{font-size:15px}#mss p{margin:0;padding-top:5px}




g-img{display:block}._WCg{display:block;border:0;position:relative} Search Results

    How To Install Replace Front Brake Pads 2000-06 Chevy ...

    9k=? 4:46 https://www.youtube.com/watch?v=nPohZtD8zlA May 27, 2014 - Uploaded by 1A Auto Parts http://www.1aauto.com/brake-pads/i/1abps00080 1A Auto shows you how to ... Front Brake Pads 2000-06 ...

    HOW TO INSTALL REPLACE GMC YUKON DENALI ...

    z? 14:10 https://www.youtube.com/watch?v=um7dt_yvZ1s Sep 20, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon Denali. Changing these parts ...

    How to REPLACE INSTALL BRAKES and ROTORS GMC ...

    2q==? 11:32 https://www.youtube.com/watch?v=UWqows3P4DE Feb 11, 2012 - Uploaded by TheRykerDane Video on how to change the brake pads and rotors on a 2004 GMC Yukon. Changing these parts ... Would ...

    GMC Denali Brake Pads Removal and Installation - YouTube

    z? 3:45 https://www.youtube.com/watch?v=uEKs8nphVxU Oct 24, 2012 - Uploaded by AnotherLookFilms Remove and Install rear brake pads on your 2006 GMC Denali XL. ... 9-21-13 2007 GMC Yukon rear brakes ...

    GMC Yukon Denali Front Disc Brake Pad Replacement ...

    2q==? 8:21 https://www.youtube.com/watch?v=w_gn_l5lYkw Jun 20, 2013 - Uploaded by AMS Automotive Watch the proper procedure for replacing front disc brake pads. Featured vehicle: 2007 GMC Yukon Denali ...





Jan 22, 2016 | Cars & Trucks

1 Answer

Need to perform rear brake pad change on 2006 Volvo V70 AWD 2,5T wagon


brakes are brakes, push in , turn in, or two piece calipers. remove wheel , remove two bolts that hold caliper in place, remove replace pads if rotors look good if not remove caliper retainer and rotor replace or have resurfaced at local part store with service. if push in piston push in with c-clamp or piston tool, if turn in will be solid on top with slots for tool to turn in turn to right, tool can be gotten at parts store, if two piece take apart and put back then bleed brakes.

Aug 19, 2012 | 2006 Volvo V70

1 Answer

I need to change the front brakes on a 2001 BMW Z3 3.0...any special tools required for that? I've done lots of brake jobs, but never on a beamer...thanks!


NOPE NO SPECIAL TOOLS JUST REMOVE BRAKE PAD WEAR INDICATOR CONNECTOR.REMOVE THE CALIPER GUIDE BOLTS AND THE SPRING CLAMP.TURN UP THE CALIPER AND REMOVE THE BRAKE PADS.THE INNER PAD IS LOCATED WITH A SPRING IN THE PISTON.

Oct 25, 2010 | 2000 BMW Z3

1 Answer

Hello! I am going to replace my front brake pads for my Chrysler 2007 Sebring. There was a grinding noise that just started and right now it is very intermittent, so it means it's time for it to be...


Normally it's not too tough to change the brake pads with minimal tools. You will need a large C clamp or brake tool to compress the brake caliper piston back into the caliper. I would check the condition of the brake rotors, if you have heard some scraping.

Oct 18, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

Need to change rear brake pads


just like any other disc bake job colapse pistons replace pads just standard hand tools will do the job.be carefull when you put the bolts back in that hold the caliper they strip real real easy

Mar 20, 2010 | 2003 Chrysler Town & Country

3 Answers

Is there anything special about changing brake pads on a 2004 Escalade?


CHANGING THE BRAKE PADS IS THE SAME AS ANY OTHER CAR OR TRUCK THERE IS NOTHING DIFFERENT, MAKE SURE YOU REMOVE THE BRAKE RESEIVOIR CAP PUSH THE PISTON BACK SLOW AND REPLACE THE BRAKE PADS.

Nov 17, 2009 | 2004 Cadillac Escalade

1 Answer

Passat 2003 tdi, brake pad change..


Proper size wrenches and a large C-clamp to push piston back into the caliper is only tools for the front, but back disk brakes require special tool to TURN the piston as it is pushed back into caliper to reset emergency brake. This tool can often be borrowed from Auto parts store or purchased from Harbor Freight http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=40732 for about $20. Don't try to service rear disks without the tool, Calipers can be broken if not retracted properly!

Jul 03, 2009 | 1999 Volkswagen Passat

1 Answer

How to change back brakes? I can't get the brake cylinder to go in.


Do you mean back brake pads or the back brake callipers?
To change pads you need to use a rear brake pads changing tool to screw in the calliper piston or if you are experienced enough you could screw in the calliper with a two mm thick piece of metal sheeting that fits into the grove of the piston.
If you need to replace the whole calliper remove the hand brake cable first and clamp the flexible brake hose remove brake hose, remove the callier with cylinder and then remove the calliper holder. fit new holder pads and locks and the calliper with the piston and the brake hose and the hand brake cable. Bleed the brakes. Mike

Apr 26, 2009 | 2001 Volkswagen Beetle

2 Answers

Changing brake pads


front or back?

Aug 30, 2008 | 2005 Audi A4

4 Answers

2002 Jetta Brakes


On one of the front driver side pads there is a sensor for low pads. He either did not hook it back up or got a lose connection to it.

May 29, 2008 | 2002 Volkswagen Jetta TDI

Not finding what you are looking for?
1993 Buick LeSabre Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...