Question about 1994 Jeep Grand Cherokee

1 Answer

What are the best jack points for my '94 Jeep grand cherokee?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Best place for jack is under the end of the axle tube, just before trailing arm attachment point. This will lift axle and tire without extending the suspension. This also depends upon what the ground is like where vehicle is parked. If ground under axle is soft, you can place the jack under the chassis to avoid having the jack fall over or sinking in. Or, if you can, move to more solid ground. What's more important is where not to put the jack...never place it where a suspension arm is attached, on a suspension arm that will change angle as it is going up, on a floorboard or anywhere it will crush a brake or fuel line. If you travel where ground is usually soft, carry a 1" thick 20x20 square of plywood (I carry same made from 1/2" steel. Use it under the jack to spread the load). Though "factory" jack will do the job, I suggest you invest in a halfway decent floor jack with a locking pin (a bit more reliable and safer)

Posted on Jul 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

94 Jeep Grand Cherokee 4x4 with the 4.0 Keeps blowing the fuse that controls the fuse box inside the jeep, its blowing a 40 amp fuse. I believe there is a short. but i don't where to look.


Get yourself a set of factory wiring diagrams,
otherwise your wasting your time

You have no idea what you working on, without
reference material

Helm.Com

Jun 20, 2012 | 1994 Jeep Grand Cherokee

1 Answer

I have a 94 jeep grand cherokee that's overheats


I had a similar problem on my jeep and it turned out to be the cooling fan, watch it and see if it turns on after its been running for a while. Good luck

Jun 29, 2011 | 1994 Jeep Grand Cherokee

1 Answer

94 jeep grand Cherokee excessive play in steering wheel when driving but not parked


I would try jacking up the front & put it in jack stands unlock stearing. Shake front left to right up & down see if there's any play in the linkage

Jun 01, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Where do i place a jack stand on a 1995 Jeep Grand Cherokee?


Hope this helps and please don't forget to rate...thanks!

Jacking points on all Jeep vehicles



c17hydro_1.gif

Your Jeep was supplied with a jack for emergency road repairs. This jack is fine for changing a flat tire or other short-term procedures not requiring you to go beneath the vehicle. Do not attempt to use the jack on any portions of the vehicle other than specified by the vehicle manufacturer. Always block the diagonally opposite wheel when using a jack.



c17hydro_2.gif

Placing a floor jack under the front frame rail



c17hydro_3.gif

Placing a floor jack under the rear frame rail at the leaf spring shackle. It may be necessary to place a block of wood between the frame rail and the jack



c17hydro_4.gif

Supporting the front of the vehicle with jack stands placed under each frame rail


A more convenient way of jacking is the use of a garage or floor jack. You may use the floor jack at the specified points in following the illustrations.

Never place the jack under the radiator, engine or transmission components. Severe and expensive damage will result when the jack is raised. Additionally, never jack under the floorpan or bodywork; the metal will deform



c17hydro_5.gif

Support the rear of the vehicle using jack stands placed underneath each side of the rear differential (inset photo)

Nov 04, 2010 | 1995 Jeep Grand Cherokee

1 Answer

94 Jeep Grand Cherokee radio not working. Display lights up, but antenna does not go up when radio is turned on. Tape player FWD/REV operates, but does not play.


Time to go to best buy or order onlinehttp://www.bestbuy.com/
Sounds as if your deck needs replaced and this could be the result of antenna not working.

Oct 05, 2010 | 1994 Jeep Grand Cherokee

2 Answers

94 jeep grand cherokee will not shift into overdrive


My 97 Jeep Grand Cherokee was doing the same thing. I changed the TPS ( Throttle Position Sensor) Now it is great goes into overdrive fine. It is really easy to change.

Jan 27, 2009 | 1994 Jeep Grand Cherokee

2 Answers

94 JEEP GRAND CHEROKEE


Should be under your passenger seat...

Jan 14, 2009 | 1994 Jeep Grand Cherokee

2 Answers

94 Jeep Grand Cherokee Transmission Problom


1994 is the same as 1997. parts are interchangeable

Dec 31, 2008 | 1994 Jeep Grand Cherokee

1 Answer

94 Jeep Grand Cherokee MY transmission went out


no it wont work.they made too many changes with them about 2 years older and id say yes but no they wont interchange

Dec 31, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
1994 Jeep Grand Cherokee Logo

1,124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...