Question about 2000 GMC Yukon XL

1 Answer

The panel doors in back will not lock with the key, remote or main consol. How do I repair? It is a 2000 Yukon XL 1500

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • GMC Master
  • 2,050 Answers

Your lock assembly might be stuck. Try a nozzle spray lubricant in the lock and latch.

Posted on Aug 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I turn off my interior lights on a 2000 Yukon XL 1500


You can try pushing the override button located right under headlight dial.

Apr 04, 2015 | 2000 GMC Yukon XL

1 Answer

Kye wont turn /2000 gmc yukon xl 1500


is the steering wheel locked

Aug 16, 2012 | 2000 GMC Yukon XL

1 Answer

Repairing the lock on a 1500 chevy silverado year 2000


remove the door panel and see if theres power to the power lock actuator is so the actuator is bad if not power locks remove the door panel and check the linkage rods

Aug 14, 2012 | 2000 Chevrolet Silverado 1500

1 Answer

What size engine does my 2000 yukon xl have is a 4x4


2000 GMC Yukon XL 1500 4WD:
Available engines: 8 Cylinders T 5.3L SFI

2000 GMC Yukon XL 2500 4WD:
Available engines: 8 Cylinders U 6.0L SFI

Hope this help (remember comment and rated this).

Apr 23, 2010 | 2000 GMC Yukon XL

1 Answer

Do you have a part # for the #1 remote keyless entry key fob 2003 Yukon xl. Bought vehicle used and got driver #2 fob but would like to have the #1 also cause 2 different drivers and would like settings...


Here is a secret, I go to the Salvage Yard and buy them for $10.00 and reprogram them for the match the car's. When you go to the Salvage Yard, if there organized will have sets of fob keys in a box. Go though it and look for the same FCC numbers on your working Fob key and here is the instructions for you to do the relearn for your 2003 Yukon XL.
1. Close all vehicle doors.

2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold
down until instructed to release in step 9.

4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the
engine).

6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock
the doors automatically.

10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until
the door locks and unlocks.
This step may take up to 30 seconds.

11. Repeat step 10 NOW for each additional transmitter (including any existing
transmitters).

12. Turn the ignition switch to the ON position in order to exit the transmitter programming
mode.



Good luck and thank you for using Fixya, just call around the different Salvage yards if not you can try E-bay.

Mar 08, 2010 | 2003 GMC Yukon XL

1 Answer

Since I purchased my 2000 GMC Yukon XL 1500 we have had a water leak that soaks the drivers side floor and passenger floor behind the drivers seat. I took it to my GMC dealer and they had it two days and...


You may be right about the sun roof. It should have 4 tubes to drain water that comes in around the glass. Sometimes the tubes fall off letting the water come into the cabin. The horn may be the part in the wheel. Apply it at different angles and it might start working. Sometimes they get rusty. I think your cabin filter would be under the hood near the firewall on the passenger side with a plastic cover.

Jan 15, 2010 | 2000 GMC Yukon XL

1 Answer

2003 yukon 2rear doors and tailgate door wont lock manually or remotely if i tap on lock relay in fuse panel the doors will lock once and then no more, i replaced relay didnt help


Sometimes you need to look past the obvious. If it happens again, remove the fuse panel and check the wires where they join with the connectors for the relay... these are crimped connections and can easily corrode under certain conditions.
Glad you have it working again!!

Sep 11, 2009 | 2003 GMC Yukon XL

2 Answers

2005 gmc yukon back passenger doors will not unlock with key remote and rear hatch wont unlock or open


Either the relay for the locks is bad or the fuse. When you push the power lock on the inside if the doors do not unlock then I would check the fuses, both inside and under the hood. If they do work then the relay/s may be bad. You are pushing your key button twice correct?

Jun 21, 2009 | 2005 GMC Yukon Xl Denali

1 Answer

Removing passenger door panel


There is a screw behind the lock rod. Lift door panel straight up to remove

Jun 13, 2009 | 2003 GMC Yukon XL

Not finding what you are looking for?
2000 GMC Yukon XL Logo

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...