Question about 2004 Volvo XC90

1 Answer

What is the right tools to change pads - 2004 Volvo XC90

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Goto (auto zone , advanced )free tool loaner program they have all you need .pay and return when done full refund

Posted on Jul 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Need to perform rear brake pad change on 2006 Volvo V70 AWD 2,5T wagon

brakes are brakes, push in , turn in, or two piece calipers. remove wheel , remove two bolts that hold caliper in place, remove replace pads if rotors look good if not remove caliper retainer and rotor replace or have resurfaced at local part store with service. if push in piston push in with c-clamp or piston tool, if turn in will be solid on top with slots for tool to turn in turn to right, tool can be gotten at parts store, if two piece take apart and put back then bleed brakes.

Aug 19, 2012 | 2006 Volvo V70

1 Answer

Hello! I am going to replace my front brake pads for my Chrysler 2007 Sebring. There was a grinding noise that just started and right now it is very intermittent, so it means it's time for it to be...

Normally it's not too tough to change the brake pads with minimal tools. You will need a large C clamp or brake tool to compress the brake caliper piston back into the caliper. I would check the condition of the brake rotors, if you have heard some scraping.

Oct 18, 2010 | 2007 Chrysler Sebring Sedan

1 Answer

Need to change rear brake pads

just like any other disc bake job colapse pistons replace pads just standard hand tools will do the carefull when you put the bolts back in that hold the caliper they strip real real easy

Mar 20, 2010 | 2003 Chrysler Town & Country

2 Answers

Install brake pads on the rear of a 2002 Ford Thunderbird

remove wheel
remove pads, they just clips on to the caliper and will pop right off with a screwdriver.
There are 2 different kinds of calipers that ford uses. on oine you will be able to take a c-clamp and force the piston back into the caliper. ON the other type you have to have a $10 tool from oriellys. This tool will hook to the backside of the caliper and turn the piston back in. ONce the piston is backed off, clip on new pads, and slide over rotor. Should be 1 pad on each side of the rotor.

there is no need to bleed the brakes unless you loosen lines which you shouldnt have to do.

Mar 07, 2010 | 2002 Ford Thunderbird

1 Answer

Step by step instructions how to change rear break pads on seat leon fr 2006-2007 model

easy to do if you have the special tool to wind the calipers in ,if you do not have the right tool take it to your local garage

Jan 26, 2010 | 2007 Volkswagen GT Mk V Coupe

1 Answer

How tough is it to change out the pads and rotors on a 93 impreza? are there any special tools requried? I just did it on my 2000 GMC pickup, is this comparable?

You will be amazed at how easy the Subaru is. Bet you spend half as much time than you did on the GM. To change pads remove wheel, use 12mm wrench to undo the bottom bolt of caliper. Flip caliper upward after colapsing the caliper pads. If you need to change the Rotor also. There are 2 14mm bolts that hold the caliper bracket. Then the rotor slides right off. Good luck and have a great day.

Nov 29, 2009 | 1993 Subaru Impreza

3 Answers

Is there anything special about changing brake pads on a 2004 Escalade?


Nov 17, 2009 | 2004 Cadillac Escalade

2 Answers

What tools do i need to change break pads

lug wrench to take wheel off , 3/8 allen head socket to remove the caliper slide bolts and a c-clamp vise grip or just a reg. c-clamp to compress the caliper piston , a small pry bar or large flat head screw driver to help get th caliper of the bracket once unbolted and a hammer never herts to have around for good measure! let me know if you need to know anything else. good luck

Sep 26, 2009 | 1992 Buick Regal

3 Answers

Are any special tools required or any special process to change the rear brake pads on a 2006 Jetta? I have changed pads on BMW's Fords Chevys etc....but you never know, so I thought I'd ask. thanks!

These cars usually have disk brakes in the back. You need a caliper piston rotator tool, this tool fits into the caliper piston and you must turn it in to retract the piston, it fits onto a 3/8 " drive socket wrench. Npa sell a universal one for like $15.00 - $20.00.

Jul 08, 2009 | 2006 Volkswagen Jetta

1 Answer

Tool for 2006 brake calipers I need size

buy a set of the torque bits they come in sets of 4 or 5

Jun 14, 2009 | 2006 Mazda Tribute

Not finding what you are looking for?
2004 Volvo XC90 Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts


Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides