Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

My 1994 olds Ceira turn signalwiper/lever broke off leaving a small peice inside the housing. How can I remove this piece?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,113 Answers

Small drill bit and a self tapping small screw!

Posted on Jul 22, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

...please tell me, the small light of my old fridge broke..is there danger of fire..the fridge works..thank you..


unplug the fridge so there is no danger of electric shock,and remove the piece of socket left in there from the old bulb with a insulated pliers.. the remaining wire pieces can short out and blow the breaker in the house .i would not leave the broken bulb in there .

Feb 23, 2015 | Cars & Trucks

1 Answer

I have a 1994 pontiac bonneville se, there is a metal like housing unit that is a part of the steering column that causes the turn signal to click when you pull the lever. The lever plugs in the the wiper...


This sounds like that actual turn signal switch assembly. To replace it you must remove the steering wheel and disassemble the column a little. This takes some special tools and skill.

Sep 04, 2011 | 1994 Pontiac Bonneville

1 Answer

My 2007 Chrysler 300 starts fine but will not shift into any gear


I just finished repairing my 2007 - 300 for the same issue. Pulled in the garage.. went to go out , and could not get the shifter out of park. Researched this issue online.. First step is to remove the right side plastic holder next to the shifter. There is a small hole that has a pink plastic piece. Push this in while moving the shift lever out of park. If the shift lever does not move, then the other "pink thingy" piece that is located inside the shifter box has most likely broken. There is a tiny spring that attachs to this pink piece ( probably a $0.50 piece of poorly engineered product ) that breaks off. See the following link on how to fix this problem. I drilled a small hole in the pink plastic piece where the small hook broke off.. then attached a cotter pin through the hole , and fastened the spring to that... should not have any further problems.. this link demonstrates how to remove the shifter box. The entire process took me roughly 2 hrs to complete... saved myself hundreds of repair dollars!!http://www.300cforums.com/forums/tech-tips-review/61876-tech-tip-review-park-lock-out-mechanism-installation.html

Aug 23, 2010 | Chrysler 300 Cars & Trucks

1 Answer

07 BMW 750I HOW TO REMOVE OUTER DOOR HANDLE


To remove the outer handle, open the door and while looking at the edge of the door with it open, you should be looking at the side that the door latch lever is on, look near the top area and you should see a small black plastic oval piece. Remove that piece. Take a flash light and look inside the hole. There will be a brass lever inside with a small hole. Use a pick and insert in the brass slide. If you either push or pull the lever to or away, it will release the outer handle assembly. The assembly levers upwards when removing.

May 18, 2010 | 2007 BMW 750Li Sedan

2 Answers

My key is stuck in the ignition of my car.


Weird. First I would drive to my favorite locksmith and see what he thinks. If it wont come out you are going to have to remove the lock tumbler. Remove the dash housing to give you access to the lock. With the battery disconnected turn the key to the acc position. Look on the side of the lock housing and find the small hole with a little pin sticking up in it. Using a small tool push the pin down and hold it down. Insert a small flathead screwdriver into the slot and pry the lock tumbler out. Now you should be able to completely remove the tumbler by hand. Purchase a replacement and install it or take the old one to your locksmith and have him evaluate the old one.

Dec 30, 2009 | 2000 Buick Regal

1 Answer

We have a 1994 trooper and it broke down last night Gren flag said it has a air lock,where are the injecters?


The injectors are under the intercooler on the N.S. same side as the injector pump. Isuzu have a self bleading system so the problem is before the diesel gets to the injector pump its drawing air into the system somewhere between the tank and the pump. Most common place is around the small manual pump on top of the filter housing. To check the filter housing take the two pipes off it and join them together with a smaller pipe which slides inside them. Try starting it up it will turn a while until the air gets out the system. If it start's. (most likely will) replace the filter housing. Can't fix the old one its a sealed unit.

Nov 11, 2009 | 1994 Isuzu Trooper

2 Answers

The light bulb broke while in the socket. How is


take a small very small pair of wire cutters or long nose plyers and get a piece of whats lefe and twist and turn it will come right out.

Aug 05, 2009 | 1994 Mercury Topaz

1 Answer

Turn signal/wiper lever broke of in column how do I remove broken piece of lever to replace.


sorry to say this you will have to take the steering wheel off to get to the turn singnal switch. caution with air bag

Jul 18, 2009 | 1994 Oldsmobile Cutlass Ciera

3 Answers

2002 Mitsubishi Montero Sport Turn Signal Switch


i have the same problem in my 1998 Montero and was surprised to see your posting. I just went to an auto electric expert and diagnosed it as a broken turn signal switch that needs to be replaced.

Dec 30, 2008 | 2002 Mitsubishi Montero Sport

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...