Question about 1994 Oldsmobile Cutlass Ciera

1 Answer

Turn signal/wiper lever broke of in column how do I remove broken piece of lever to replace.

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 23 Answers

Sorry to say this you will have to take the steering wheel off to get to the turn singnal switch. caution with air bag

Posted on Jul 26, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

02 sebring t/s flasher locate

The flasher itself is right beneath and beside the hazard switch. To get to it, look underneath the steering column, just behind the steering wheel. On the bottom of the plastic cover that the turn signal lever, wiper lever, and hazard switch protrude from you will see two deeping drilled holes, at the bottom of each you will see a Phillips head screw. Remove these two screws, and pull the two plastic pieces apart. It may take some force as the two pieces are somewhat snapped together on the sides. Once you have removed these two pieces, you will be able to clearly see the flasher on the top isde of the column. It will be on the passenger's side of center, it's prongs plugging into the switch from the front.

Mar 18, 2015 | 2002 Chrysler Sebring

2 Answers

My tilt steering wheel lever broke on my 2003 Oldsmobile Alero?

If you can't get a used one from a breaker (not sure what you call them in the USA, in the UK they are breakers or scrap yards), could you cut a piece of thin (2 or 3 mm?) plastic or metal and epoxy/screw it to the broken pieces on the side you can't see?

May 15, 2014 | Oldsmobile Alero Cars & Trucks

1 Answer

How to repair turn signal lever

In order to repair the lever you must replace the turn signal switch, this requires the **** shell covers on the steering column to be removed, they are held on by 4 screws recessed in holes, then the switch is bolted to the steering column tube by two machine screws, do not break the wire connectors to the switch, remove them carefully. Always disconnect the battery negative cable before working on the steering column

Feb 10, 2012 | 1997 Nissan Pathfinder

1 Answer

I have a 1994 pontiac bonneville se, there is a metal like housing unit that is a part of the steering column that causes the turn signal to click when you pull the lever. The lever plugs in the the wiper...

This sounds like that actual turn signal switch assembly. To replace it you must remove the steering wheel and disassemble the column a little. This takes some special tools and skill.

Sep 04, 2011 | 1994 Pontiac Bonneville

1 Answer

My turn lever is broken , on the insu=ide of the steering colume, i cannt find and info or part to fix it.

You have more problems than just replacing the lever. There is still a piece of the broken lever inside the wiper switch, and is nearly impossible to get out. You will need to replace both the turn lever and the wiper switch. Replacing the wiper switch is no easy task, and if you are not familiar with General Motors steering columns, it's probably best to pay a shop to do the repair. The top half of the steering column has to be disassembled, and the wiper switch harness fed up through the column.

Aug 21, 2011 | 1998 Pontiac Bonneville

1 Answer

98 Mercury Sable signal/wiper switch/lever broken.I have removed the column covers,must now remove ignition switch,except the lever/pin that has to be poked thru the pinhole was broken by someone...

turn the ignition to the on position and using a punch drive the pin in. be careful not to drive it to hard so as not to damage the column then pull out the old ignition switch. replace it to while your at it. hope this helps

Jan 26, 2011 | 1998 Mercury Sable

Not finding what you are looking for?
1994 Oldsmobile Cutlass Ciera Logo

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides