Question about 2006 Chevrolet Tahoe

2 Answers

I would like to disconnect the chime. My radio was switched to a dvd setup and it goes to full volumne after keying it off, then back on later. when i key it back on , the chime goes full blast also. The chime control was in the factory radio which i do not have now. i just wish to cancel the chime.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 295 Answers

Well since you had the dvd setup installed .
You should take it back to the place that installed it. They could have wired it in wrong .
Otherwise , I think you are going to be stuck .
Maybe you can locate the chime in the vehicle and disconnect the wires going to it. Then just cap off the wiring with electrical connectors.

Good luck

Posted on Jul 18, 2009

  • richtko94 Jul 18, 2009

    Well since you had the dvd setup installed .

    You should take it back to the place that installed it. They could have wired it in wrong .

    Otherwise , I think you are going to be stuck .

    Maybe you can locate the chime in the vehicle and disconnect the wires going to it. Then just cap off the wiring with electrical connectors.



    Good luck

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Locate the chime speaker under your dash and disconnect it !! Ring it a few times to locate it!!!swampratt200!! AAAEEE!!!!

Posted on Jul 21, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i disconect the dinging wen the key is n the ignition. Its anoying wen radio is playing 2002 chevy trailblazier


You can't disconnect the chime, it goes thru the radio and is generated by the Body Control Module (BCM).

Sep 11, 2016 | 2002 Chevrolet TrailBlazer

1 Answer

Radio goes off when taking out ignition key as it should, but five minutes later it comes back on again all by itself


it may be a programable unit. To check if it is a fault rather than a setting issue disconnect the battery for five minutes, this will give any memory the opportunity to lose the setting, then reattach your battery lead. If the issue reccurs then you may have a fault ... The fact that the radio can switch on despite the key being removed indicates that it is designed to be able to do so, (stating the obvious, sorry,) so it might well just be a settings issue.

Jun 08, 2016 | Cars & Trucks

1 Answer

Radio on but no sound and door chime not working


door chime is activatid by switch on door raido should only come on when key is in on or acc setting if key is not in all the way door chime should not come on at all

Aug 25, 2012 | 2003 GMC Sierra 1500

3 Answers

Navigator Door Chime goes off when car off and I open the door. Radio system stays on & interior lights go off when door shuts.


All this comes from the GEM module,You will need to repair the driver door lamp switch located in the door lock assemble.

Mar 15, 2012 | 2003 Lincoln Navigator

1 Answer

'02 Rendevous beeping randomly, no lights or trouble indicatiors on. Beeps when parked, beeps while driving, no rhyme or reason apparant. sometimes goes 10 or 15 minutes without beeping, other times beeps...


The audible warnings alert the driver of a system concern or a critical vehicle condition. The radio generates the audible warnings through the left front speaker. The radio receives audible warning requests via the class 2 serial data line from the IPC or body control module (BCM). If the radio receives multiple audible warning requests, the warning with the highest priority sounds first. The following lists the audible warning priority and the pulse rate:
Fast rate chime--200 pulses per minute
Medium rate chime--150 pulses per minute
Slow rate chime--50 pulses per minute
Single chime

Is the sound heard different from typical Audible Warnings ?

Fasten Safety Belt Warning
The radio activates the fasten safety belt audible warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, slow rate and duration (5 pulses). The fasten safety belt warning sounds and the fasten safety belt indicator illuminates when the following occurs:
• The ignition switch transitions to ON.
• The inflatable restraint sensing and diagnostic module (SDM) detects that the driver's seat belt is not buckled, signal is low. The IPC receives a class 2 message from the SDM indicating the driver's seat belt status.
If the seat belt is buckled when the ignition is turned on, the chime does not sound. If the seat belt is buckled while the chime is sounding, the chime stops. If the seat belt is unbuckled after the initial transition to ON, the chime does not sound.
Headlamps On Warning
The radio activates the headlamps on warning as requested by the body control module (BCM). The BCM sends a class 2 message to the radio indicating the chime frequency, fast rate and duration, continuous. The headlamps on warning sounds when the following occurs:
• The ignition is OFF.
• The BCM determines that the driver's door is open, signal is low.
• The BCM determines that the headlamp switch is in the park or head position.
Key-In-Ignition Warning
The radio activates the key-in-ignition audible warning as requested by the BCM. The BCM sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The key-in-ignition warning sounds when the following occurs:
• The ignition switch is OFF.
• The body control module (BCM) determines that the driver's door is open, signal is low.
• The BCM determines that the key-in-ignition switch is closed, signal is low.
Turn Signal Reminder
The radio activates the turn signal warning as requested by the IPC. The IPC sends a class 2 message to the radio indicating the chime frequency, medium rate and duration, continuous. The turn signal warning sounds when the following occurs:
• The ignition switch is in the RUN position.
• The turn signal switch is in either turn position, sensing, within 1 second, an open to B+ transition in the turn signal control circuit, left or right turn.
• The vehicle has traveled a distance of 1.2 km (¾ mi) by counting pulses on the vehicle speed input circuit.
The IPC turns OFF the turn signal reminder when either the ignition switch is turned to the OFF position, or the turn signal switch returns to the OFF position, sensing, within 1 second, no transitions from open to B+ in either of the turn signal control circuits, left turn or right turn.
Additional Chimes
The following chimes will turn ON when an associated indicator/message turns ON in the IPC/DIC:
• ABS indicator
• AWD Disable indicator
• Battery/Charge indicator
• Brake indicator
• Change Engine Oil indicator
• Door Ajar indicator
• Hot Coolant Temp indicator
• Low Brake Fluid indicator
• Low Fuel indicator
• Low Oil Level indicator
• Low Oil Pressure indicator
• Low Tire Pressure indicator/reset
• Low Washer Fluid indicator
• MIL (Service Engine Soon) indicator
• Oil Life Reset
• Park Lamp Out indicator
• Rear Hatch Ajar indicator
• Service Traction System indicator
• Service Vehicle Soon indicator
• TRAC OFF indicator
For a description of an indicator refer to Indicator/Warning Message Description and Operation .
For diagnosis of an indicator refer to Symptoms - Instrument Panel, Gages and Console .

Did the Mechanic check for DTC'S - diagnostic trouble codes in the BCM or insturment cluster ? Did you try a Buick dealer ?

Jul 09, 2017 | 2002 Buick Rendezvous

1 Answer

How do you disable the door chime and key reminder


the switch is inside the steering column at the end of the ignition key lock switch. The chime is wired to other circuits as well. I would leave it be and wire the radio direct so no key is needed to turn the key on to play

May 16, 2010 | 2003 Ford Explorer

3 Answers

My door chime wont stop ringing when the driver side door is open and the keys are out of the ignition. how can i fix this?


I just found out that the problem on our 1998 windstar was the chime switch attached to the ignition switch. This chime switch when dislodged will short and act as if the keys are still on when the door is open ( thus sounding off the alarm). I had a hunch that the problem was close to the steering wheel because the alarm would stop if I change the angle of the steering wheel a couple of notches up or down. I guess when i did that the chime switch that i'm pertaining to get reset to the right position and stops the alarm. when i opened up the steering wheel housing around the ignition , the chime switch fell, it had a blk wire I think, and I saw that the clips on it were kind of melted thus not sticking to its right position. I just had to remove the ignition switch for a while and replaced the chime switch with the help of a zip tie wrapped around it. then I placed every part back together and no chimes... also I did this all while the battery was disconnected because i needed the ignition switch to be in the on position to get it off the steering wheel. Good luck guys!

Apr 30, 2010 | 1992 Honda Civic

1 Answer

I have a 1997 buick ultra park avenue. yesterday I put my car in park and cut the car off. aLL THE LIGHTS INSIDE AND OUTSIDE THE CAR WENT OUT ALONG WITH THE ENGINE. HOWEVER WHEN i OPENED THE DOOR TO GET...


sounds like theres a problem with the ignition switch or the cylinder lock,your going to have to unplug harness connection under dash to see if radio goes out with the chime if it goes out when unpluged then the problem is in ingnition system, most likely its a jammed key sensor in cylinder, start there hope this helps,

Nov 17, 2009 | 1997 Buick Park Avenue

1 Answer

No power to cab, no power to start, but clock has power


check fuse block for shorts, melting discoloring,on back side of fuse panel around starter relay. loose connection causes fuse block to over heat will need to be replaced.hope this helps.

Oct 29, 2009 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
2006 Chevrolet Tahoe Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...