Question about 1997 Mazda 626

2 Answers

My mazda engine car over heats and it doesnt move fast enough

It doesnt move fast as much as i press the accelerator.It also makes some sound which looks like stressful sound when i accelerate.
I also feel heat radiatingfrom the dash board.
What is the problem and what do i do?

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 148 Answers

It may be a coverter problem but if the MAF sensor is not reading correctly the car will run lean and cause the exhast too get realy hot and the car will not run very well

Posted on Aug 01, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 180 Answers

Ok this sound weired but i bet i am right. ur cadalatic converter is clogged up. be care u can ruin ur engine

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont start the first time, can smell gas and it turns over though. i leave it for few hours and try it again and it starts first try! why is this


stop pumping the accelerator because it sounds like you are flooding the engine. 1 press when cold is more than enough

Nov 03, 2013 | 1979 Mazda RX7

2 Answers

Wont accelerate


spark plugs ,,or ignition distribution is my main concern ..have your fuel filters changed as well as injectors cleaned ,,,that will probably solve it fast...go to your auto zone have them read it free

Oct 18, 2013 | Mazda Cars & Trucks

1 Answer

How do I adjust throttle cable on 1989 chev c2500 to raise idle speed throttlebody injection


Can't adj..clean your IAC. Idle Air Control valve, or possibly replace it. The Computer adj's you idle by this valve moving in and out, it gets carboned up and does'nt move like it should.

Feb 13, 2012 | Chevrolet C2500 Cars & Trucks

1 Answer

Car oil light is coming on when i brake. no unusely sound in the car or motor sound also the service engine soon light has been coming on


Well i hope its not the oil pump because the oil pump works with the speed of the engine when it turns and as you know when the engine turns fast the oil pump turns fast too and the more you accelerate the faster the oil pump turns, that means there is more pressure of the oil to go up top the engine and when the engine idles, The pump turns slowly, and doesnt pump enough oil up top the engine and the oil pressure switch dosent detect any oil passing by then it send a message that the pressure is low. So check your oil pressure during idle. Good luck Bro

Dec 11, 2010 | Mazda MAZDA6 Cars & Trucks

1 Answer

Doesn,t want to start without holding the


poss injector dribble, leaking injectors fill pots over night does the engine spin over fast first try in the morning depressing the gas pedal to the floor make a NO FLOOD condition in the vehicle so it will not deliver any more fuel what do you think, possible?

May 15, 2010 | 1993 Mazda MX-6

1 Answer

Mazda 323 fuel injection1994 accelerator problem


Try changing the fuel filter. If it clogs up the engine won't get the fuel it needs to run at wide throttle openings, the engine will ****** the timing, and you'll lose power. With less throttle the filter can flow well enough for the engine to run properly.

May 16, 2010 | 1994 Mazda 323

2 Answers

You cranked the car and moved around driveway to allow another car to get out. Shut it off. Now it sounds like the engine is turning over, but no fire, just spinning..


Do you have a Wankel engine in you car?
Then you have a flooded engine.
Pull the fuel pump fuse or relay and crank the engine over......until it starts then stops.
Now put relay or fuse back and start.
You cannot start and stop a Wankel in a Mazda RX when it is in it's cold mode and restart it easily.
Always run them for at least 10 min before shutting it off.
The other way to start after flooding.....is wait a day.

Aug 25, 2009 | 2004 Mazda RX-8

1 Answer

Engine noise while accelerating


Check the exhaust system for catlytic converter blockage.

Jul 10, 2009 | Mazda B4000 Cars & Trucks

1 Answer

When I start the car, it dies when I press the accelerator


this sounds like a mass air flow sensor problem. they make a cleaner for the m.a.f. try that first and see if your problem goes away. if not you might have to replace the m.a.f.

Dec 22, 2008 | 1999 Saturn Lw 4dr Wagon

Not finding what you are looking for?
1997 Mazda 626 Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...