How to replace the serpentine belt on a 2008 Pontiac G6 BY 3.5 V6

SOURCE: 2001 pontiac sunfire serpentine belt diagram

go to autozone.com and it will give you the belt diagram

SOURCE: need diagram of serpentine belt for 94Solution for "need diagram for replacing serpentine belt for 94 ford taurus gl w/3 0 v6 engine and a/c" ford taurus gl w/3.0 v6 engine and a/c

Thanks for using FixYa - a FixYa rating is appreciated for answering your FREE question.

marcial adorno

• 246 Answers
• Posted on Sep 08, 2009

SOURCE: how to replace a serpentine belt on a 2004

1. Lift the car so you can work from underneath when needed.
2. Disconnect the battery . Just to be safe.
3. Take the serpentine belt off.
4. Remove the alternator.
5. Remove the A/C compressor. (You can do it without removing, but it's a royal PITA... LOL) Don't unhook the lines, just unbolt and move out of the way.
6. Remove the worn tensioner from t he block. (You need to unbolt the pulley first to get to all the tensioner bolts)

SOURCE: changing serpentine belt 3.8 2007 pontiac grand

• Make sure your new belt exactly matches the old belt demensions
• Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
• Loop the old belt around the pulleys & fan
• Install new

SOURCE: do i have to disconnect motor mount to replace my drive belt

Depends on the motor. If there is a mount on the passanger side that the belt goes around then yes. Don't fret though, easy to get around. Use a jack and a piece of wood on the oil pan to support the motor so you can remove the motor mount to remove the belt. Again, this is on SOME gm motors not all. On the others the mount isn't in the way at all.