Question about 2002 Nissan Quest

1 Answer

Nissan Premira 2002, european spec. When replacing brakes pads w/ABS, are there any adjustments required or resetting procedures? My email is address

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The vehicle being worked on was jacked up and supported by sturdy jack - stands. All four wheels were removed to access disc brake assemblies. Tools utilized (1) C clamp for the front caliber to press piston back in it bore and (2) a special tool for the rear to return caliber back in it bore. Replaced pads and all pertinent hardware, torque all fasteners to specification and wheel assemblies. Road tested vehicle and checked for noise and rattles. So thanks for the tip that was given and I wish you and your staff a nice sunday.


Posted on Jul 19, 2009


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 420 Answers

SOURCE: Nissan Premira 2002, european spec. When replacing

Nope, just change the brakes like any other car.

Posted on Jul 18, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Reset esc on patriot

you cant.
if they set, the auto clear if they stop failing
RTM did you read the opearators guide, yet> it say that.

first off, get the brakes fixed.
both those systems, require, good brakes.

lets say one pad is bad.
so the ABS can not control this wheel.
so since ESC uses ABS then it too fails. so forget ESC, that is last.
the FSM covers the scan tests.
scan it.
did you even scan it? if not , maybe there is a DTC error
that needs to be addresses.
like ABS sensor RF is dead, or reading wrong or my gosh,
the pad there is toasted.
or grease on the rotor?

not doing a full brake inspection now, misses the boat

Sep 28, 2014 | 2010 Jeep Patriot

1 Answer

Nissan X Trail ABS warning light intermittent

Check front brake pads for wear and possible replacement. If never changed originals, there is a high likelihood they are worn out.

Jan 07, 2014 | 2002 Chevrolet TrailBlazer

1 Answer

2002 Trailblazer 4wd - Brand new brake pads, rotors, and hub assembly that contains the bearings. When I soft brake a grinding/slipping sounds occurs but the brakes are not slipping. Hard/fast brake no...

Sounds like over active ABS. is it possible that one of the bearings you installed is defective? Where the axle nuts tightened to the proper spec. Have you checked for play on the new front bearings? Otherwise you will need a high end scan tool to monitor wheel speed data from the abs module. It will be fairly easy to see what speed sensor is dropping out and causing the aver active abs to occurs.

Sep 08, 2013 | 2002 Chevrolet TrailBlazer

1 Answer

ABS light

  • TDISLine - your car specialist
  • Status: Available
  • Rating: 93%
  • My Motto is: "Straight to the fault. Fix it right the first time!"

TDISLine - Cars Repair Online Help!
  • Automotive Engineer
  • With 23 years of cars repair experience
  • Quick Response!
Audi, BMW, Citroen, Daewoo, Fiat, Ford, Hyundai, Isuzu, Jaguar, Kia, Land Rover, Lexus, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Peugeot, Porsche, Renault, Saab, Subaru, Suzuki, Toyota, Volkswagen, Volvo

I can help you trouble shoot and solve your car problems.
Permanently focused on automotive diagnosis & reparations: Check Engine & Traction Control Lights, Brake - ABS & ESP warning lights, SRS - Airbag warning lights, Service messages, and other types of electronic warning indicators.
Complete technical car assistance for DIY reparations: serpentine belts routing diagrams, timing belt or chain replacement pictures & instructions, Service intervals reset, maintenance schedules & procedures, brake pads and rotors replacement, cylinder head gaskets replacement, and all types of needed informations about cars.
If you want to save money by Do It Yourself - DIY, I will guide you step-by-step with detailed instructions & pictures. Depending on the difficulty level of reparations and special tools & equipments required, I will correctly inform you from the start point, so you can choice yourself the best way to fix your car problem.

I'm waiting for you at Marketplace with full info about ABS Service reset instructions & pictures.

Nov 10, 2011 | Cars & Trucks

1 Answer

My 2007 nissan quest 3.5S mini van is in almost perfect condition until I recently discovered something deviating from what I know is common to brakes. I do all maintenance work to my cars (nissan VW,...

Master cylinder and/or brake booster could be the problem. A tiny bit of air in the system will effect your braking abilty. A fault in the ABS system would prompt the computer to trigger the ABS light. If you have brake shoes on the rear, make sure they are properly adjusted. Hope this helps.

Jul 04, 2011 | 2007 Nissan Quest 3.5 Minivan

2 Answers

2001 Montero brakes. R&R rear rotor, pads & calipers but the brake pedal travel is still very slow to "reset". I am certain my front's need new rotors, pads and possibly calipers due to the...

Disk brakes are automatically self adjusting. If you have too much travel in the pedal, bleed the brakes. Let us know if you need the procedure.

Jul 02, 2017 | 2001 Mitsubishi Montero

1 Answer

2002 ram 1500 brake and abs light on

there should be adjustment under vehicle looks like bolt attached to cable just back off nut and loosen bolt 

Oct 06, 2009 | 2002 Dodge Caravan

1 Answer

Abs lights came on after replacing pads

try bleeding the system including the master cly,if that doesnt work then discnnect the battery for 5 min too reset the computer

Mar 04, 2009 | 2002 Honda Accord

2 Answers

Abs light on

if you know the code for the radio... unhook the battery for about ten minutes to reset the abs warning.... if it comes back on after that there may be another issue.... but make sure you have the code for the radio or it will become unusable.


Dec 18, 2008 | 1999 Audi A4

Not finding what you are looking for?
2002 Nissan Quest Logo

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76691 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides