Go to junkie and get glass - then remove inner door panel and clean out glass track and cement new glass into the track just cleaned. Replace inner door panel and you are good to go.
Was expecting there might be a few tricky bits to it... Thanks, I'll give it a bash
×
SOURCE: 1991 Chevy Blazer S10 window motor installation
http://www.a1electric.com/s10motor.htm. This link has pictures and step-by-step instructions. I found it and have both sides to replace. Hope this helps.
SOURCE: power windows wont work
All things Capri are at //www.techcapri.com/
The manuals are there - check them out ...
Wiring diagrams are there. Probably fixed by now anyway.
Regards
Richrobi
SOURCE: replacing passenger window kia spectra 03
go 2 any little garage or 2 rac window replacement center take ur own glass ul pay around 30 pound 2 hav it fitted
SOURCE: replace mirror on 2003 subaru outback
take the triangle plastic trim cover off from the inside which conceals 10 mm bolts that mounts the mirror
SOURCE: passengers side rear view mirro replacement
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
55 views
Usually answered in minutes!
×