Question about 1993 Toyota Corolla

1 Answer

How to replace the alternator belt of 1993 toyota corolla hatchback model

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 1,348 Answers

There is a tensioner with a lock nut on it.it looks like a bolt. you have to release the tensioner nut first,then back off the tensioner and change the belt.that car has 3 belts

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 toyota corolla charging light on in the dash won't go out battery and alternator are fine what is the problem


How old is the belt that turns the alternator? Any whining sounds as motor revs up and down? If your belt is old and frayed, it might not be fully turning the alternator pulley...Hope this helps.

Mar 16, 2012 | 1993 Toyota Corolla

2 Answers

1993 Toyota Corolla, temperature guage is not moving and heater is much cooler than normal. Its mid winter?


This might be a problem with your tempeture sending unit for the gauge the other part might be your heater core.

Jul 21, 2010 | 1993 Toyota Corolla

1 Answer

How do I replace the altinator on a 1993 toyota corolla?


The procedure to replace alternator is as follows:-- 1) Determine which alternator your Toyota Corolla needs. Be sure the new alternator is compatible with your Corolla's engine.2) Disconnect the negative battery cable with a socket wrench. Remove the gravel shield if you need to access the alternator from under the car. Remove the electrical connector and unfasten the retaining nut on the alternator terminal with a socket wrench. This allows you to remove the battery terminal wire.
3)
Remove the drive belt. Unfasten the two mounting bolts on the alternator with a socket wrench and take the alternator off the vehicle.
4)
Install the new alternator assembly. Use a torque wrench to tighten the smaller mounting bolt to 18 foot-lb. and the larger one to 40 foot-lb.
5)
Connect the electrical harness and battery terminal wire to the alternator and fasten the retaining nut to the alternator terminal with a socket wrench.
Thanks. keep updated for any more query.you can rate this solution and show your appreciation.

Jul 10, 2010 | 1993 Toyota Corolla

1 Answer

How can I tighten the alternator belt?


loosen the bolts for the alternator, then lever the alternator away from the block to tighten the belt.you have 2 bolts holding the alternator and 1 holding the adjusting arm.(loosen both ends/lever/then tighten)

May 27, 2010 | 1993 Toyota Corolla

1 Answer

Alternator


First you need to remove the serpintine belt or alternator belt. If it is a serpintine locate the tension pully(the one that doesn't look like it does anything) place a wrench over the pully bolt and pull while removing the belt. Most generaly all alternators have two bolts holding them in. Remove both bolts. and remove alternator on some vehicles you need to remove the top engine mounts to remove the acctual alternator. make sure you if you do this you put a jack under the bngine block. NEVER ON THE OIL PAN. After that simply remove the old alternator and replace it with the new one reinstall the serpintine belt as instructed on either the underside of your hood or where the hood latch is.

Apr 10, 2010 | 1993 Toyota Corolla

1 Answer

Where is the alternator located?


The alternator is located inside the engine comparment left side (if you are standing in-front of the car-facing the engine). It is very near to the exhaust manifold. And the alternator belt is facing the windsheild washer reservior.

Dec 10, 2009 | 1993 Toyota Corolla

2 Answers

Replace alternator belt only for 1993 toyota camry


loosen the mounting bolts on the alternator, remove the old belt, replace with the new belt, slightly tighten the top mounting bolt, pull the alternator up until the belt is tight or if there is an adjustment bolt, crank down until tight (shouldn't bow more than 1"), and tigten other hardware.

Mar 28, 2009 | 1993 Toyota Camry V6

1 Answer

Replace the alternator belt


Well I got the belt on and it was tight enough to drive it over to my friendly Mechanic and he adjusted the tension for me so now all is well.

Nov 19, 2008 | 1993 Toyota Corolla

3 Answers

1994 toyota corolla alternator belt replacement


loosen the bolt that is holding the adjuster of the alternator. loosen the belt by pulling it and the alternator would slide in. remove and replace the belt.

do the reverse on installation.

remember to tighten all bolts of the adjuster and alternator after tightening the belt.

tnx 4 using fixya,

drcool

Sep 13, 2008 | 1994 Toyota Corolla

Not finding what you are looking for?
1993 Toyota Corolla Logo

721 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...