I can't find the speedometer sensor on my 1990 oils 98 regency brougham. I would like to rpplace it myself.

pat murray

• 293 Answers
• Posted on Oct 17, 2008

SOURCE: 1990 olds 98 regency fuel filter location

it is under the back by the fuel tank

SOURCE: 1991 oldsmobile 98 fuel filter replacement location?

my fuel filter is located right behind the pass side tire on the inner side of the frame.

Duane Wong

• 6826 Answers
• Posted on Jul 05, 2010

SOURCE: Need a diagram to replace the crank pulley on a

This is what I found on the 98 Regency instructions: Crankshaft Damper REMOVAL & INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the belts from the crankshaft pulley.
3. Remove the crankshaft damper attaching bolt.
4. Attach a suitable puller to the damper and remove the damper from the crankshaft. NOTE: On certain models, removal of the cooling fan, fan shroud or radiator may be necessary for clearance. WARNING
   DO NOT pry on the damper assembly to remove it from the vehicle or component damage will result. Remove the damper using a puller only.
   
5. Installation is the reverse of removal. Torque the damper bolt to specification. Fig. 1: One example of a crankshaft damper puller tool
   Fig. 2: Removing the crankshaft damper bolt Fig. 3: Do not attempt to pry on the damper to remove it from the crankshaft, use a puller only Fig. 4: Removing the damper from the crankshaft Fig. 5: When installing the damper, thread the bolt by hand first to prevent cross-threading

SOURCE: Where is the fuel pump

I dont think it has a fuel pump relay. Should be Ign. then fuse in fuse box then fuel pump in tank.

SOURCE: 1990 oldsmobile steering wheel audio controls

I have the same problem did you ever figure it out.