Question about 2005 Ford Crown Victoria

1 Answer

I drive 2005 ford cab. it has a problem of speed, when I give gas, the niddle rige up but the speed remain same just like if the speed 25mph though I give more gas , speed does not change and gas niddle fluctuate why is this happen and how can I solve the problem?

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 298 Answers

I need make and model and more information, I understand that the odometer is not marking the correct speed and the fuel indicator is not stable Most of the time the speed is not marking correctly is that the spindle or plastic gear are striped if it's a cable operated if it's electrical then it could be the speed sensor on the transmission now with the fuel gauge there could be a loss negative cable if you can give me make and model and motor maybe I can give you more information good luck

Posted on Jul 18, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2005 Honda Odyssey Traction control is kicking on for no reason in high speed left turns, and even by simply shaking the steering wheel back and forth while driving at as little as 25mph. Honda dealer...

Check your van if it has steering angle sensor, or you have a faulty Right front wheel bearing , because the TCS tracktion control system, and the anti lock brake system working together

Oct 21, 2013 | 2005 Honda Odyssey

1 Answer

2005 S Isuzu Ascender Speedometer niddle moved all the way to the right of gage and as not moved.

If the odometer is working correctly, the problem is inside the speedometer head.
The speed sensor would be on the side of the transmission if the odometer is not working.

Apr 07, 2013 | 2005 Isuzu Ascender S

1 Answer

Is there a fuse or relay for electronicshifting 2003 ford ranger edge 3.0 and where please.My truck wont shift above 25mph

shift solenoids are controlled by the pcm. a blown fuse is most likely not your problem. could be just a speed sensor issue, or shift solenoid/internal trans. problems

Feb 08, 2012 | 2003 Ford Ranger Regular Cab

1 Answer

My 2002 Ford Escape stalls on a hot day.

I can give you a lead on the problem you describe. Since the problem occurs with Hot weather use, there should be a temperature sensor involved. I envision a STEP-UP circuit triggered by the Heat which probably increases RPM by advancing the engine timing. Either that or it orders the ISO valve to increase RPM.

Since you are experiencing the problems at 25MPH and below the Timing may not be fully advanced. Thus the Computer is not getting a signal from the Temperature sensor or the signal is going to the Computer and and it does not respond.

There are usually 2 speeds for the Cooling fan. High Speed may not work and it may need to work to kick in the RPM STEP-UP.

Please contact me when you find the problem so I can share. You seem to be doing your best and I hope my theories lead to a solution.

Jun 27, 2010 | 2002 Ford Escape

1 Answer

We have a 2005 Ford Ranger Supercab. While driving the bakkie starts to shake, as if it gets a speed wobble. We have spoken to many other owners of Ford Supercabs and double cabs and it seems as if there...

The speed wobble problem is serious on my vehicle.It is so bad at times if you hit a certain angle or speed ration on certain roads that it feels as if the vehicle wants to throw you out of the cockpit.I have spent R15 000 up to date on it also through Ford's good advice and have now given it back to Ford to resolve, The same day 3 other vehicles got taken in.I say everyone with a Ford Ranger cab should take it in and park their vehicles in the entrance of the workshop and walk away with the keys . They will soon get the message that it is their problem and not the drivers problem.

Jan 25, 2010 | 2005 Ford Ranger

2 Answers

My car wont go more than 25mph

check for a plugged catalytic converter.

Apr 27, 2009 | 1989 Ford Taurus

1 Answer

I have a 1996 Ford Ranger extended cab with automatic transmission. In drive the transmission slips. It just started to do this after a replaced gas tank. I checked the fluid and it is at correct level....

Run and obd2 scan at autozone or advance. this is free. This will let you know if any sensors are bad and it will give you a course of action. It could be your input or output speed sensor or your ECM or TCM. Exhaust these options before pinpointin the transmission as the problem Its also possible when they replaced the gas tank they dislodged a ground connection. Good Luck

Dec 08, 2008 | 1996 Ford Ranger SuperCab

1 Answer

Truck seems to stall while driving.

I have a 1980 GMC 3/4 ton stick shift truck and this past week my truck seems like its stalling as it drives. i had the oil and fuel filter changed this past thursday and it keeps stalling.

Oct 04, 2008 | 2001 Ford Ranger Regular Cab

Not finding what you are looking for?
2005 Ford Crown Victoria Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75842 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides