Question about 1996 Chevrolet Blazer

2 Answers

1996 ignition switch-what wires to check power on

1996 ignition switch-what wires to check power incoming power on no responce from ignition.( power @starter,power@alternater)

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 850 Answers

Ignition switch may be worn or a loose exciter wire [to starter] thats the small terminal on starter motor you can bridge it to the posative [power] on the starter it should start!
if it does start just work back from there to ignition look for broken or loosse connection
if that all is ok it will need ignition switch

Posted on Jul 18, 2009

  • Joe condon Apr 21, 2013

    Might miss spoke replaced battery an starter car ran fine prior to parking an old starter all of sudden when going start would not disengage from try start after engine starting . so replaced starter an battery with better one an still same engaging problem. disconnected igniton completely an an jumped starter an car ran but starter stays engaed still? can only shut off by disconnecting battery .took of power wire to starter an found contious power to ignition wire with tester look for broken fused wires to no avale? this has REALLY got us Stumped been days on this.

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 55 Answers

Locate a starter and ignition relay. test them or just replace them. good luck.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I wire a tether switch on 1999 700 RMK


You have to put the tether on the incoming hot wire to the ignition. This will kill all power to the ignition. Thus killing the engine. Sorry I can't tell you the color code.

Feb 01, 2015 | Cars & Trucks

1 Answer

1989 dodge 250 the red ignition wire is getting hot and melting in two when the key is turned to the run position


Blue wire to ignition switch,from alternator voltage regulator.( 12 volts ) ECU power wire, Red wire to battery terminal. Blue wire goes from alternator to the ignition switch. The voltage regulator senses the incoming voltage from the blue wire. ) it grounds the green field wire This energizes the alternator field, and the alternator begins to produce a charge and sends it to the battery via the main output wire. When the voltage regulator senses 14 volts from the blue field wire, it cuts the ground to the green field wire. Good-Day!

Sep 21, 2014 | Cars & Trucks

1 Answer

1996 nissan maxima wont start, windows wont roll and dashboard caution lights and icons not lighting up when i turn the key. the turn signals also arent working but they do with the hazard lights on. car...


I think your ignition switch has quit working, or it has stopped getting power. If you pull the connector apart to the ignition switch and check if there is one wire on the harness side of the connector that has power, it sure looks like a bad ignition switch. One fat wire, about 12 gauge size, going into the switch should be hot at all times. If you have it, pretty obvious that power is not going out of the switch. key on should send power out of the switch to the fuses for the windows and other accessories, and also send power to the dash for the warning lights and gauges.
Power to the switch will be either from one of your fusible links near the battery or from a maxi fuse in the fuse/relay block under the hood. The funny action of the key kind of points to the ignition switch, though. Still, check for power into the switch first.

Oct 01, 2013 | 1996 Nissan Maxima

1 Answer

1996 Camry reverse lights don't work


Check if you are getting power to the reverse light switch. Turn ignition on, disconect terminals to the switch and check for power on the positive terminal using a light bulb or a test meter whatever. If power is there jumpthe 2 terminals and check if light backup light works. If it does replace switch. If ther is no power at switch check wiring from fuse box. If light does not work when switch is jumped check wiring to back.

Sep 11, 2012 | 1996 Toyota Camry

1 Answer

1996 nissan pathfinder driver side window won't go up and down


does it click or grind when pushing window button if so the window lift track may need replaced, if there are no sounds then disconnect the wires from the lift motor and with the ignition on so power is sent to switch, push button and check wires to 12 volts dc. If no power I would replace the driver side switch after checking the wires for defects. If there is power then I would re-install wires to motor after turning off key and try button again with power on. replace motor if it doesn't work.

Dec 31, 2011 | 1996 Nissan Pathfinder

1 Answer

My tans sport 1996 wipers soped wprking fuse is good trying to find a relay pump for wiper wash stop working as well


Your symptoms are typically that of a defective fuse. There are no relays for either the wipers or the washer pump and both operate off the same fuse. Check the fuse again and make sure that it is making good contact on both contacts. With the ignition on, check that you have 12 v + on one of the fuse contacts to earth, use a volt meter or a 12 volt bulb to check this. If you have power and the wipers are still inoperative you will have to start looking at wiring and the wiper/washer switch incoming power wire right from the fuse box.

Apr 10, 2011 | 1996 Pontiac Trans Sport

2 Answers

I need help! I have a 1996 vw Jetta! Wont start and wont crank! Dash lights come on but when I turn the key nothing happens! What should I check?


I would check to see if you are getting power to the small wire on the starter solenoid when you turn the key to the starting postion. If you do, the starter is bad. If not, you probably have a bad ignition switch.

May 20, 2010 | 1996 Volkswagen Jetta

1 Answer

Heater fan not working in a 1996 Chevy S-10


I looked at wiring diagrams at bbbindustries: the orange wire to the 20 amp htr fuse is direct from the ignition switch. You might check: that orange wire splices to the 10 amp brake fuse (fuse #12). check if that also has any voltage problems.
There are two black fusible links that supply power to the ignition switch. the fusible links come from the battery junction block.

May 26, 2017 | 1996 Chevrolet S-10 Pickup

1 Answer

1996 jeep grand cherokee limited no power to coil


Check the ignition switch this provides power to the ignition power wire to the coil, check the fuse first.

Jul 15, 2009 | 1998 Jeep Wrangler

1 Answer

1996 Toyota Camry 2.2 - will not start from ignition switch


Sounds as if this is a Nuetral Saftey Switch or wire Problem check the N/S Cuircit for Opens.

Jan 16, 2009 | 1996 Toyota Camry

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

371 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...