Question about Jeep Grand Cherokee

2 Answers

I have the the Headlight controle apart and I want to change the bulbs on the PC Board.... I have been to my local Jeep dealer and they where no help....I have also checked Napa & Auto zone and other stores but they are clueless too....

Posted by on

  • woodfurd Jul 18, 2009

    I can Email a picture of the bulbs I am looking for, I don't see a way to send them thru this..



    FYI-----Everthing else is working now.....

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 601 Answers

Hi...

Sure. You can copy past the picture into this box, that would really help.

Thanks
Smith

Posted on Jul 18, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jeep Master
  • 76,846 Answers

NOT SURE WHAT BULBS U ARE REPLACING, PLEASE BE SPECIFIC, THE DEALER WANTS THE JOB SO THEY WILL NOT HELP FOR FREE, PARTS PEOPLE ARE NOT TECHS AND THEY WOULD NOT BE ABLE TO ANSWER, IF U INTEND ON WORKING ON YOUR OWN CAR YOU SHOULD INVEST IN A FACTORY SERVICE AND REPAIR MANUAL, THEY ARE CHEAP AND U CAN FIND THEM USED ON EBAY MOST OF THE TIME.

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I replace the headlight wire harness?


Yes, you can buy it from your local toyota parts store(dealer)

Jul 28, 2012 | 2006 Toyota Corolla

1 Answer

I need to replace a 2000 jeep cherokee laredo headlight bulb. How do you get the headlight fixture out. I removed the screw that I thought was it but it did not budge... CJ


There is no screw involved. You do not remove the headlight housing. Look for wires going to the back of the headlight you should see a plastic retainer nut, take the nut off, pull out the pigtail connector and twist to the left to remove it from headlight housing, then pull the bulb out and replace. No screwdriver or any tools required.
P.S. Your local parts store usually will do this for you or show you how for free. As long as you buy the bulb from them.

Mar 07, 2011 | 2000 Jeep Grand Cherokee

1 Answer

How do i change headlamp bulbs


Changing the headlight bulb is a little bitdifficult for those not familiar with the vehicle. Both the high and low beamsare encased in a sealed unit, which also contains the turn signal, parkinglights, and side reflector. To change a single headlight, the entire headlightcompartment must be removed from the car. Once you understand how to remove thesealed headlight unit from the car, replacing the bulb is relatively simple.Follow the steps below on how to change the headlamp bulb in this car. Removal 1. Open the hood of the Jeep and locate thelong, headlamp jackscrew. The screw is located almost directly above theheadlight unit and can be removed using a 7-mm socket wrench. This will allowyou to remove the bezel from the grill opening panel. Remove the three screwsattached to the retaining ring to the headlight console. The screws are locatedon the bottom front and side of the unit. In some models the screws have beenreplaced with ball-stud alignment posts, enabling you to remove the headlightunit by simply wiggling it loose. 3. Disconnect the headlamp bulb wireharness connector located at the front of the headlight unit. This is locateddirectly above and between the parking and turning bulbs. 4. Separate the sealed headlight unit fromthe vehicle; disconnect and replace the old bulb. The high beam is locatedtoward the center of the car. The low beam is the bulb on the outermost edge ofthe unit. This is how to Install 1. Reconnect the headlamp bulb's wireharness-connector. Then Replace the headlight unit in the headlight canister. Positionthe retaining ring back in its original position and install the three screwsagain. If you wiggled the unit out, ensure that it is replaced firmly. 2. Install the headlamp bezel by replacingthe 7-mm jackscrew on the inside of the hood. Make sure all connections aretight before starting the car and inspecting the replacement.

Jan 14, 2011 | 2000 Jeep Grand Cherokee

2 Answers

How to change a headlight for Saturn outlook for 2007


I have an Outlook that was burning through bulbs. The best way to change it, is to remove the inner fender well and it gives you easy access to the rear of the headlight assembly. It takes about 2 min and no skinny hands required.

May 25, 2010 | 2007 Saturn Outlook

1 Answer

How do you remove the headlight on a 2002 jeep (Grand Che.) to change the bulb


Not real sure on the new jeeps but on the older ones you can reach the bulb from the back side without removing the headlight.

Jan 07, 2010 | Jeep Grand Cherokee Cars & Trucks

1 Answer

Left dipped headlight


I had the sane issue with my headlight and they switched the headlight from right to left to see if it was the bulb or the control unit. It turned out it was the bulb and they replaced it.... luckily under waranty. I didn't see a date to your post but mine was done in June 2009 and my dealer was aware of the issue.

Sep 23, 2009 | 2006 Audi A4

1 Answer

How can I change the pass side low beam bulb on my 1999 Acura TL?


you have to get behind the headlight capsule there should be a rubber plug covering the headlight capsule take that off and the bulbis held in by a spring lever on the capsule. or take it to the dealer or a local body shop which would be cheaper

Jan 02, 2009 | 1999 Acura TL

1 Answer

Change headlight


1) Left side is in front of the Airbox for the aircleaner. 2) Right side is in front of the battery (which HAS to be removed to replace the bulb).
3) Replacing the BULBS for $10 each is all you normally need to do - Unless the lights are Fogging and getting Condensation in them.
The you have to remove the bumper to repace the headlight assemblies. It is a pain. Costs $300-600 at a dealer.

Dec 26, 2008 | 1999 Jeep Cherokee

1 Answer

Changing headlight bulb


HI Yes for my Jeep
I have a 2001 Jeep. There is a long bolt that scews out above the light assy in the frame and then you have to grab both sides of the head light assy and wiggle and pull it out of the little sockets which it sits in. It takes a good pull the first time, put grease on the socket balls before reinstalling.
The newer and older body styles may be different . Cheers Glen

Jun 15, 2008 | 2001 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...