Question about 1996 Jeep Grand Cherokee

1 Answer

All gauges stopped working...96 Grand Cherokee Limited

Front gauges stopped working!

Also, and maybe related but not as recent...'rear lamp failure' error on display yet all lights work!

...and 'coolant sensor bad' error on display while coolant sensor has been swapped twice and checked and there is nothing wrong with it!

Otherwise the thing runs tip top but it makes it hard to sell!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

There are loose wires in the dash that could be touching are burnt out.need re wiring

Posted on Jul 20, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will 96 rear end work in a 99 grand cherokee


A 96 Grand Cherokee rear end is not compatible with the 99. The Grand Cherokee changed body styles in 99, and among other things, the bolt pattern for the wheels changed.

Sep 04, 2011 | 1999 Jeep Grand Cherokee

1 Answer

The Rear Lamp Failure light comes on, and Ii have no been able to locate where this is located. I do not have an owners manual. I have checked the tail lights, brake lights, even the tag lights, and I am...


Nice SUV, I have the same with 5.2L V8 Limited!!!

Are you sure that there are no lights out?pay attention to the third brake light because it has 3 bulbs and if one is outit will give you that message.also make sure that all of the bulbs are the right ones.

I used to get the "Rear Lamp Failure" message on my '93 Limited after the lights were on for a few minutes... it went away when I changed the rear bulbs to the same brand. The Lamp Outage Module (located in the LR quarter panel, near the fuel filler) is looking for differences in current flow between the left and right side bulbs.

You probably need a new lamp outage module...
CIRCUIT OPERATION
The Lamp Outage Module (LOM) determines if a rear lighting lamp is not operating. When the ignition switch is in the START or RUN position, circuit A1 from fuse 8 in the Power Distribution Center (PDC) connects to circuit A21. Circuit A21 feeds circuit F87 through fuse 5 in the junction block. Circuits F87 feeds the LOM.
- Circuit G46 from the LOM connects to the Vehicle Information Center (VIC) . When the LOM senses a inoperative lamp, the VIC displays the data to the vehicle operator.
- Circuit L90 which feeds the tail lamps and side marker lamps, connects to the LOM. From the LOM, circuit L90 continues to the license plate lamps. Circuits L21 and L22 from the LOM power the tail lamps and side marker lamps.
- Circuit L50 from the stop lamp switch connects to the LOM. From the LOM, circuits L73 and L74 power the stop lamps and circuit L87 powers the Center High Mounted Stop Lamps (CHMSL) . Circuit Z1 grounds the LOM.


If you need tha owners and repair manual about your ZJ Grand Cherokee, just keep in touch and send me one comment.

Hope this helps (remember to rate this answer).

Jan 14, 2011 | 1993 Jeep Grand Cherokee

1 Answer

2001 Grand Cherokee Limited- Driver side rear brake light does not work if tail lights are on. When you step on brake tail light also goes out. With lights off everything works ok.


Very common issue is the lamp assembly (dealer item). They are very bad to ground back through the tail lamp filament, lights on the path has voltage on it and the lamp will not work.

Nov 19, 2009 | 2001 Jeep Grand Cherokee

1 Answer

CHaging signal light in a 96 Jeep Grand Cherokee


Review this info: ZJ-Secc-8L-Lamps (page Lamps 8L-5 and next)

Good luck, and rated me!!!


Aug 02, 2009 | 1996 Jeep Grand Cherokee

1 Answer

"rear light failure" light comes on.


have you changed any bulbs in the rear lights yet? you can put 2 different bulbs in the 3rd brake lamp,921 and a 922. one of them will read the wrong resistance and then you will get a lamp out warning. check and make sure that they all match

May 10, 2009 | 1996 Jeep Grand Cherokee

2 Answers

1997 grand cherokee limited 4x4 v8


HI, It may seem obvious, but sometimes overlooked.... have you checked the oil level, as low oil can cause some strange things to happen! My 96 4 liter would be reluctant to move sometimes, but after I topped it up, it has been fine.

Apr 28, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...