This is a software issue with the engine control computer (PCM) go to the link for the information what you need to do. http://reclear.blogspot.com/2014/05/2000-volvo-v70-engine-code-p1603.html
SOURCE: How to unlock my 2000 volvo s70 radio code. It says ''OFF''
The unlock code is in tha manual who follows whit the car.
Here is a manual how to use the radio
http://www.volvo.com/NR/rdonlyres/BC1CC211-4B7E-46C5-BD35-C62F50DFD70E/0/Radio.pdf
If you cant find the code among the manuals and service books, contact a volvo dealer to get a new one, if the volvo dealer cant help you contact Volvo global.
u can do it here
http://www.volvo.com/group/global/en-gb/Applications/ContactUs20/contactus20.htm
Follow the instructions an that site and give them all the info/numbers the want on your car
Good luck to you
SOURCE: Check Engine light P1670
I have a 2000 Volvo S70 as well with the same code. Do you ever have trouble starting your car? I did and that's why I took it to the dealer. Appartently it's the code for the ignition immobilizer system in your car (part of the security system). Specifically, a part call the antenna ring. The antenna ring is the outer portion of your ignition switch on the steering column - the part that lights up and has the following printed on it: 0 - I - II - III. This part is actually a sensor that transmits the code stored in the microchip inside of your key. When this part goes bad it fails to transmit the correct key code to the computer, and cuts the fuel to the engine.
The dealer wanted to charge me $550 for a new antenna ring, two new keys, and software to program the car's computer with the new key codes. I purchased the antenna ring online for $50 and did it myself in 15 minutes - so easy. They claim that you can't replace the antenna ring without new software - lie! You only need the software if you are replacing the keys.
Car is running great.
SOURCE: HOW DO YOU REPLACE THE PASSENGER SIDE VIEW MIRROR
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
SOURCE: srs light needs to be reset
Here's a quick check list
for most common cost of SRS / Air bag problem.
Dirty contacts on driver
and passenger seat belt buckles
Dirty contacts on seat belt connectors
(under seats)
Dirty contacts on driver and passenger sides weight
sensors (under seat)
Seat covers
Weight on passenger seat
(Example:
grocery package trigger SRS / Air Bag light on the way home.)
I
recommend you to pass an vacuum over the contacts and use CRC
electronic parts cleaner to rule out connectivity problem.
I DO NOT
recommend disconnecting the negative battery connector to clean the code(s).
Without the code(s) the dealer will takes "BILLABLE" time to reproduce
the problem.
======
Please rate my answer if it is useful to you.
Cheers,
Mustgo
476 views
Usually answered in minutes!
×