Question about 2000 Nissan Maxima

2 Answers

Error code P0755, Shift Solenoid B Malfunction

if my car is does not have the take off speed of first gear but instead tries to build speed for second gear could this be because the tranny srainer needs to be cleaned or could it just be the shift solenoid B really malfunctioning and causing the car to strain its take off. I'm really trying to avoid getting another tranny. By the way i did get the error code P0755
Request givin for 2000 Nissan Maxima 3.0

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Nissan Master
  • 76,070 Answers

Go with the new solenoid, in order to change it the trans pan has to come off so install a new filter at that time.

Posted on Jul 17, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Can you post a picture of the shift solenoid B

Posted on Mar 05, 2012


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Transmission diagram 727

IF the transmission is not electrically controlled (TCM) I have to ask if the valve piston in the valve body was installed the correct way around as it appears that the port openings are out of sync with the selection

Nov 10, 2013 | Cars & Trucks

1 Answer

I purchased a 96 Metro 1.3L 5 speed about a year ago, and it was hard to get it into gear, and it would often pop out of 3rd gear when driving. Now I have trouble going from first to second without...

your best bet is to get a tranny from an auto wrecker, and replace the clutch while you're at it. If the tranny is that problematic, it's not worth fixing. The clutch kit, which includes the disc, release bearing, and pressure plate, would be under $150, and a used tranny probably $100. Try and find one with reasonably low mileage. Good luck.

Jul 04, 2011 | Geo Metro Cars & Trucks

2 Answers

Shifts into and out of second gear hard. and has slipped a couple of times

this is a fault in the gear box velve block, there are little pistons in this velve block and they have rubber "O" rings on them if there hard or worn they leek oil past them so the gear box presher needs to be high to move them all you can do is have a re-build done on the box

Aug 30, 2010 | 1995 Ford Windstar

1 Answer

I have a 2 99 cavaliers i totled the first one

you are better off useing the good trany, the one that doesnt move sounds like it may need a complete rebuild, use the good one.

Jan 26, 2010 | 1999 Chevrolet Cavalier

1 Answer

Car will not shift out of second gear. while driving it shifts fine to second gear from first gear but it stays in second gear the entire time driven

it is going in limp mode,
if your speedometer is not working will cause this,that would be a speed sensor,or the other two reasons would be the input or output sensors on the tranny

Nov 29, 2009 | 1994 Chrysler Concorde

1 Answer

1997 Suburban 4x4 5.7L Transmission whines until it shifts

You rear planetary set is worn from a restricted cooler.

May 06, 2009 | 1997 Chevrolet Suburban

1 Answer


sounds like what happened to my camaro. it sounds like a stuck valve. i suggest taking it in for an estimate at a transmission specialist.

Mar 18, 2009 | 1996 Chevrolet K1500

1 Answer

I have a 1993 buick lesabre with 31000 miles. it has sat for a year, tranny slips in first gear only. i manualy put in first gear and gently give gas it will start moving when i hit 10 mph i shift to...

Might be a good idea to have fluid & filter changed, due to possibility of moisture build up etc. from sitting. Certainly the most inexpensive, and reasonable solution. Have all connectors removed & sprayed with contact cleaner too.

Mar 01, 2009 | 1993 Buick LeSabre

1 Answer

Tranny problems on my 96 escort

sounds like a valve body or tork converter problem it should b hooked up to a scanner hope this helps

Nov 23, 2008 | 1996 Ford Escort 4 Door

1 Answer

Auto gearchange

Are we referring to a manuel tranny or automotic? If its a manuel tranny, you have a bad syncro in the transmission. This would require a complete tranny tear down.

Sep 05, 2008 | 1999 Honda Civic

Not finding what you are looking for?
2000 Nissan Maxima Logo

Related Topics:

3,072 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides