SOURCE: 2006 Chevy equinox ls 3.1 how do you bleed the radiator coolant system
If you look on the passenger front of the engine you should see a pipe coming up from the water pump housing. There should be a bleeder screw on the top. use a 9/32" socket to loosen the bleeder. Start the engine and keep bleeder open until coolant comes out. Close it and let the engine come up to temp while periodically opening the bleeder to let any additional air out. Keep an eye on the coolant level and top off as necessary.
I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa
510 views
Usually answered in minutes!
×