Question about 1996 Land Rover Range Rover
Range Rover P38A 2.5 DSE 1999 - 4 way Traction Control. Brake light on. TC light blinking. ABS light turns off as usual when it hits 7MPH. HELP!!!
I have had this a couple of times, when they have diff trouble etc i take them to a place covered in shingle on concrete. when i figure of eight them around so everything is working hard i can detect which diff or what ever is wrong.
now when u do this for a certain amount of time, (some differ) u have to understand what happens, when round a roundabout, the wheels closer to the roundabout are turning slower, outter wheels faster as they have further to travel, this abs traction control are programmed to see it.
when u figure of 8 it gets mixed up, i have had three now had them reset and bingo. I know your abs sensors are fine as light goes like u said. the most expensive bits are working.
also i would like to add, i changed a battery on 1, the owner claimed the same prob. u have to bear in mind she could be pulling a fast 1. anyway i had it reset at my own expense as could not reason with hear, it was cured.
so there is other things there somewhere that up sets it, if u keep on figuring 8 it this does.
Posted on Aug 17, 2009
You should change the boule for abs
Posted on Sep 28, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
As for the "Wait" on the radio, this is an anti theft mechanism. Wait until the "wait" sign is replaced with a sign saying "CODE".
Then press "1" and use the manual station toggling switch to toggle to your first number. Then press "1" again and move onto the next number etc. etc.
Posted on May 20, 2009
We were having this problem...have your wheel bearing checked out. There was a sensor in the drivers side wheel bearing...once we replaced it (because it was going out) the ABS and Traction Control warning lights stopped coming on.
Posted on Jul 02, 2009
SOURCE: abs light on in land rover
you do not need antilock brakes to stop your vehicle. you know you don't have a functional ABS when the brakes do not pump on there own.
Sounds like you need to have your entire braking system checked. get your land rover put on a computer and see what codes come up. most autozone stores will do this for free.
Posted on Sep 12, 2009
Testimonial: "autozone and advance in my town both say they cannot read abs codes. So I'm left with the dealer or an indie shop I guess."
Sounds like something is overheating then and possibly a sensor. Not familiar with Rovers but might be a problem with the CAS and/or CPS which tells the ECU the motor is running and when to fire. Also maybe the IAC is bad and when you go from throttle to idle it can't control it and allows it to die.
Posted on Aug 21, 2010
Tips for a great answer:
Oct 06, 2011 | 2006 Land Rover Range Rover
Aug 30, 2011 | 1999 Cadillac Catera
Jul 12, 2011 | 1996 Land Rover Range Rover
Apr 29, 2011 | 2006 Land Rover Range Rover
Sep 30, 2010 | 1999 Land Rover Range Rover
Feb 22, 2010 | 2002 Land Rover Freelander
Nov 29, 2009 | 1998 Land Rover Range Rover
Aug 30, 2009 | 1995 Land Rover Range Rover
Jul 09, 2008 | 1996 Land Rover Range Rover
411 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: