Question about 2002 Chevrolet Silverado 1500

2 Answers

Have a 2002 chevy silverado turns over but won't start.

Have set timing but still won't run

Posted by on

  • janeclouser Jul 17, 2009

    The code is P1345 cam crank sensor fault

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,088 Answers

Is the check-engine light lit? The trouble code(s) need to be read to give you clues as to where to look. Random replacement of parts is expensive and time consuming, but will eventually fix the problem.

Posted on Jul 17, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,615 Answers

These vehicles need what is called cam reset procedure. You need a scanner to see where it is and then each time you move the distributor you need to goose it above 2000 rpm then check again at idle to see where it is. You want it at 0 degrees + or - 2

Posted on Jul 17, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 31 Answers

SOURCE: 2005 chevy silverado won;t start.

i had the same problem, and it turned out the coil pack was moulding inside wich stopped the spark all together, i ended up changing my coil pack and putting on new wires because the ends connected to the coil were very corroded and that cures the not running part just fine


enjoy

Posted on Jul 01, 2009

cool78259
  • 228 Answers

SOURCE: 2002 Chevy Silverado 2500 diesel

Check and make sure your glow plug controller is putting out voltage to your glow plugs, make sure voltage to your glow plugs is cycling. if it is not, at the front of the engine there is a temperature switch, if this switch is not working your glow plug controller will not work. also make sure you are getting diesel to your injector pump, if you are not, there is a high pressure switch at the back of the engine right behind the glow plug controller, if this switch is not working, your injector pump will not get fuel. also make sure both batteries are fulley charged, if one is low, your diesel will never start. you can jump out these switches, if your truck starts after bypassing, just make sure to replace them. i have a 1993 silverado C3500HD 2WD. good luck!

Posted on Aug 21, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 chevy silverado 2500 diesel automatic put in reverse but will not back up


you need to check the code that it set with a scanner and it will lead you to where to check to fix problem

Dec 23, 2012 | 2002 Chevrolet Silverado 2500HD

1 Answer

2002 chevy 3500 duramax 6.6 ran hot now cranks but won't start


Check spark plugs, leads, distributor cap & rotor arm, fuel pump, fuel filter, coil pack(s), relays, replace any items that are suspect IE Fuel filter which has probably not been changed since new even though they should be changed on all vehicles every 18 months, all of this can be done at home & will save you a lot of bucks in mechanic/garage fees,

Sep 21, 2012 | 2002 Chevrolet Silverado 3500

1 Answer

2002 chevy silverado won't start, replaced fuel pump, still won't start


Same problem here, found break in wiring harness at cross-member behind cab. did have bed removed for easy access. Ground wire guilty party.

Dec 18, 2011 | 2002 Chevrolet Silverado

1 Answer

I don't have an owners manual and i forgot how to set the time for my 2002 chevy silverado


For systems that have the SET button: Press SET: Within 5 seconds, press and hold the right SEEK button until the correct minute time is reached. Hold the SET button and then the left SEEK button until the right hour time is reached.
For systems with HR and Min buttons: Press and hold the hour button until the correct hour is on the display and do the same for the minute button.

Here is a free printable 2022 chevy silver ado 1500 owners manual also: http://www.manualowl.com/am/Chevrolet/2002-Silverado%201500%20Pickup/Manual/357

Aug 01, 2011 | 2002 Chevrolet Silverado 1500

1 Answer

My truck starts like it should at times, but other times it turns over, but won't start. If I leave it alone for 15-30 minutes it will usually start, without my doin anything to it. We've...


replace the batery cables (they corode in the middle and, look fine on the outside but, when you cut them in half they are filled with gray corosion dust; causing very high resistance.

Jun 29, 2011 | 2005 Chevrolet Cobalt

1 Answer

Chevy silverado 1500 security light stayed on and the next time I went to start the truck it wouldn't start. What coul;d be the problem?


try this before replacing parts. put your key in the driver door and lock then unlock with the key, if this doesnt work you can also put your key in the ignition and turn it to the run position and leve it for 15 mins or so. then try to start.

Nov 26, 2010 | 2002 Chevrolet Silverado 2500HD

1 Answer

How to set timing on a chevy silverado v6 after the distributor shaft has been changed and motor has been turned over?


Is the vehicle currently running and setting the code ckp comp correlation code?
  • P1345 - Crankshaft Position (CKP)-Camshaft Position (CMP) Correlation.Let me know I believe I may be able to assist in correcting this issue. If it's not starting we'll have to reset the distribitor and bring the the engine to top dead center on cylinder 1.
  • Oct 24, 2010 | 2002 Chevrolet Silverado 1500

    1 Answer

    Having problems with 2002 Chevy Silverado staying running. Acts like it isn't getting gas all the time. It cut out going down the hiway picked up again then cut out died and wouldn't start back. Had it...


    It's hard to figure out whats going on with out any codes. Im thinking maybe the fuel pump. To check it after it stops and doe'snt start squirt some starting fluid into the carb and see if it wants to start. If it trys to start then it's a fuel problem.

    Feb 24, 2010 | 2002 Chevrolet Silverado 1500

    2 Answers

    2005 chevy silverado won;t start.


    i had the same problem, and it turned out the coil pack was moulding inside wich stopped the spark all together, i ended up changing my coil pack and putting on new wires because the ends connected to the coil were very corroded and that cures the not running part just fine


    enjoy

    Jul 01, 2009 | 2003 Chevrolet Silverado 2500HD

    2 Answers

    Chevy 1500 electrical problem


    Your grounding somewhere. Start looking at the starter. Good luck.

    Mar 17, 2009 | 2002 Chevrolet Silverado

    Not finding what you are looking for?
    Cars & Trucks Logo

    299 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76649 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8518 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...