Question about 2000 Jeep Grand Cherokee

1 Answer

My rear window came off track then my son pushed it the rest of the way.

Posted by on

  • three4cin Jul 17, 2009

    I dont know but I took the door panel off and pulled the window back up. It would not go all the way but it worked with the switch.Until I started driving and it falls down.

  • tomscar739 May 11, 2010

    Are u sure it came off track and the regulator is not at fault we don't usualy have track problems today most likely regulator fault

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 318 Answers

These are notorious for bad regulators.

Posted on Jul 18, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to replace drivers side window on 95 chevy truck


Remove interior door trim. There will be screws as well as plastic pins that have to be pried out. Wind the window all the way down. There will be some tracks in the lift mechanism with rollers that are attached to the window frame. Locate and remove the bolts that secure the frame. The window should then come out.

Mar 05, 2015 | Cars & Trucks

1 Answer

How do I remove door panel on 87 C4 Vette


to remove door trim you have to disconnect negative battery cable.then remove two screws attaching arm rest to door trim.remove arm rest it held in place by front and rear hooks that fit into slots in door trim.to release the hooks grasp the arm rest with both hands push it towards thr door pull up on the side of the arm rest facing door.remove four speaker grille mounting screws and the grille.then remove door trim panel screwss from bottom edge of the panel.remove the three remote control plate screws from the plate and the single screw in the rear edge of the door.then lift up on the door trim panel to release the molding from the top edge of the door then slide the panel forward to clear the latch release handle and down to clear the lock rod knob.if job look to difficult let a body shop fix.removing window door motor need tools to drill out rivets and reinstall rivots you need special tools to fix window motor and regulator.

Apr 14, 2013 | 1987 Chevrolet Corvette

1 Answer

I have a 2004 vw bug and the rear window came off track. And now i need to find how to take rear panel off so i can get to the window and put it back on track.


I take it must be a convertible? Open the roof and remove the rear seat pad and back rest. You'll see the rear quarter panel trim is one piece plastic! Remove the screws holding it in place and lift it up and lay it aside with the seatbelt extended. Unbolt, unplug and remove the speaker. There are 4 bolts that hold in the rear window lifter assembly, loosen the bolts and lift out the entire assembly and then correct the window problem! I advise you though to take it to a dealer as it is a very complicated operation that requires correct adjustments of the lifter assembly because the adjustments will definitely be out for the window to come off its position!!

Oct 08, 2010 | 2004 Volkswagen New Beetle Convertible

1 Answer

2002 buick lesabre. rear electric window not supposed to go all the way down but was pushe down. it is still on the track and moves when button pushed but does not go up and down properly. even if pulled...


the window regulator has to be changed indefinately if the window can be pushed either way up or down the window regulator assembly is bad . . . . in nowadays terms there is no such thing as "window off the track" if a window is not working properly there is a reason for it ;) dont forget to rate :)

Aug 18, 2010 | Buick LeSabre Cars & Trucks

2 Answers

How do you put rear window back on track for 2005 Highlander?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can access the window and the track. You may need to purchase some new replacement clips that secure the window onto the track.

Oct 28, 2009 | 2006 Toyota Highlander

1 Answer

Left rear window off track


you'll need to remove your door panel (screws are by the door handle, arm rest, under door and side of door) and pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything.

Aug 13, 2009 | 2004 Cadillac Deville

1 Answer

2004 Accent Rear lights stay on after turning motor off and eventually drain the battery. This has occurred on my son's car and also my son-in-law's car


Is it just the Rear Window Light that stays on, or is the Rear Window Light and the brake lights located at the back/bumper of the car? If it is BOTH the Rear Window Light AND the brake lights at the rear of the car, then you likely have a faulty brake switch located at the brake pedal inside the car cabin. When the brake pedal is in the normal position, ie - you are not depressing the brake pedal, the arm of the brake pedal leading to the pedal with your foot pushes upon... this arm is applying constant pressure to the switch - with keeps your brake lights OFF. When you apply pressure to the brake pedal, it moves the brake arm away from the switch, which activates the circuit, and your brake lights turn on. If this switch is broken, your brake circuit thinks the brake pedal and arm are being pushed away from the switch, and your brake lights turn on. As you are aware, having the light on constantly can wear down your battery AND the heat from this constant light bulb of the brake light in the rear window can deform the shape of the red reflector in this rear window light housing. If, however, it is only the rear window light that stays on - then it is probably a loose or bad connection where this light plugs into the rest of the circuit in the trunk near the back seat. If this is the case, follow the wires from the rear window light assembly to the point where they plug into the rest of the circuit (inside the trunk) and unplug this wire set, clean the terminal ends, and plug them back together. ***WAIT, WAIT!!*** because you of the risk of touching the terminal ends together and blowing the circuit, if you also plan to clean the hot side, please remove the NEGATIVE battery terminal while cleaning (DO NOT USE WATER, just a wire brush or steel wool). After you are done cleaning and have the terminals reconnected, reconnect the negative battery terminal (you will also have to reset your radio stations and radio clock).

Jul 19, 2009 | 2002 Hyundai Accent

1 Answer

My window went down and would not come up. The 3 other windows goes down w/o problems. What may be the problem?


The window rests in a track to guide it up and down. The window will fall of this track causing the window to stay down. You can probly grab the window and pull it up but it will not stay it needs to be put back on track. You can do this by pulling off the door panel and working the window back in place and pushing the track tight agiant the window and adjusting them as need be. If this starts happing alot it will need a new window motor and regulater.

Good luck

May 15, 2009 | 1994 Honda Accord

1 Answer

Window fell off the runner in the door


The door panel has screws on the bottom of the door panel. If there is carpet on the base of the door panel, the holes are hidden within the carpet.

Also, you have to remove the arm rest, typically it has 2 screws holding it to door and plastic push-in door panel clips on the sides. You can use a screw driver to help pop them out.

The door panel, when loose from door, lift up and off. Take your time so you dont break any tabs on the back side.

If the window is falling off the track, there is a small plastic tab that is mounted to glass or track; it slides in the window channel on front and rear tracks.

You can get this part at your local auto parts house, in HELP section.

Feb 16, 2009 | 1991 Chevrolet S-10

1 Answer

2003 Jeep Liberty Power Window Off Track


its the window regulator. not to bad to change. just a couple of screws to remove the door panel. peel the liner back & remove the 6 10mm bolts and uunhook the electrical connector and the window from the regulator. installation is reverse

Jan 21, 2009 | 2007 Jeep Liberty Sport

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

105 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...