Question about 2005 Hyundai Elantra

1 Answer

Replacing passenger side mirror and casing

Someone ripped out the mirror plate in the passenger side mirror of my 2001 Hyundai Elantra GLS. I can find the part on line but do not know how to take off the mirror casing or replace it. Can anyone help?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 136 Answers

You need to remove the trim pannel parallel to the mirror on the inside of the vehicle, normally triangle shaped, from there there will be 3-4 nuts or bolts you need to remove, once that is done the mirror will be free to be removed.

GOOD LUCK

Posted on Jul 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need to intall new front exterior drivers side door handle on a 2002 Hyundai Elantra GLS


remove the interior door trim and you will see small nuts holding the handle onto the outer door skin. Remove any rods /clips and undo the nuts and the handle will come out.

Mar 18, 2014 | Hyundai Motor 2002 Elantra

1 Answer

P1529 code error on my 2001 hyundai elantra GLS


Check the level in the ******. Make sure that oil is there and topped up if necessary. It should be on the upper marks. Good luck.

Feb 24, 2012 | 2001 Hyundai Elantra

1 Answer

Where is the port to charge the ac on a 2001 hyundai elantra gls


High side should be on the right side of engine, just under the plastic cover, low side is the same side, almost against the fire wall just behind engine.

Aug 01, 2010 | 2001 Hyundai Elantra

1 Answer

2002 hyundai elantra gls windshild washer is not


Check the fuse box if not under the dash on the drivers side kick panel, then under the hood, look in the owners man for the location. With the key on, hold the washer switch on and have someone check for power to the pump motor located in the bottom of the washer fluid bottle if the fuse is good but not getting power to the pump then the wiper/washer switch is your most likely culprit..

Mar 20, 2010 | Hyundai Motor 2002 Elantra

1 Answer

Hyunday elantra transaxe seals


Hi yes there is a bearing in side the tranny but you should try just replacing the seal if it continues to leak then replace the bearing.

Sep 06, 2009 | 2000 Hyundai Elantra

2 Answers

I broke my passanger side mirror. I bought new


REPLACEMENT GLASS IS AVAILABLE AT YOUR DEALER SHIP AS THIS CLASS IS A CURB GLASS AND NOT A FLAT GLASS AND FITS PERFECTLY.

Jul 15, 2009 | 2008 Hyundai Elantra

3 Answers

How to change 2001 Hyundai Elantra GLS 4-Door Sedan Fuel Filter


If the filter is not at the tank, under the access panel, under the rear seat, then it is inside the tank.

May 01, 2009 | 2001 Hyundai Elantra

1 Answer

REPLACING FUSION LINK 2002 HYUNDAI ELANTRA GLS


my car has a 100 amp fuse in the fuse box and it is broken the two metal in the fuse itself is no touching its a hyundai elantra gls 2002 how do i replace it

Oct 07, 2008 | Hyundai Motor 2002 Elantra

1 Answer

Speed sensor


It is in the transmission case. It is held in place by a single bolt on a Y clamp, has 2 wires coming out of it.

Oct 02, 2008 | 2001 Hyundai Elantra

1 Answer

Hyundai GLS 1.6


yes sir, check and make sure the crankshaft positioning sensor is plugged in or it may have gotten damaged when pulling the crankshaft pulley off.

Jun 29, 2008 | 2001 Hyundai Elantra

Not finding what you are looking for?
2005 Hyundai Elantra Logo

Related Topics:

966 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...