Question about 2001 Ford Explorer Sport Trac

1 Answer

It will not start were u turn the key checked the

The ignition switch is good but the truck will not turn over with the key

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

Have the key reprogramed at the dealers.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Keys turns on but wont start the engine


check:
battery good 11 v min
battery conecctions cables, all clean
if automatic trans, in park or neutral selector
if standar trans, press the clutch pedal full down, check switch in pedal
the dash lights all on in switch on, check for antiefth extra
alarm disabled
and doors closed, seat belts
or crank start but engine no start need a full diagnosis for qualificated personal.

Sep 09, 2014 | Cars & Trucks

2 Answers

1991 thunderbird sc starting problems


Use a 12volt test light and connect to the starter energiser wire, get someone to turn the key and see if the test light comes on, if no then the starter relay has packed in. A further test you can do, but YOU NEED TO BE CAREFUL, set car in park DON't switch the ignition on, and direct feed the starter to see if it cranks the engine, if yes you are back to the starter relay.

Jan 21, 2014 | Cars & Trucks

1 Answer

I have a 1982 dodge ram w150 318 4 speed when i turn the key i lose everything let me start from the beginning my truck started up then died then when I went to restart I heard a thunk then nothing last...


What happens when you turn the key to on? Do the warning lights and gauges come on? Turning the key to start, do the lights and gauges stay on? Just nothing at the starter?

Or does power just shut off when you turn the key to start, everything goes out, no warning lights or gauges? Then check cables, battery terminals, grounds for clean tight connections. There is a problem between the battery and the ignition switch.

If the switch still receives and sends power out (to the dash, for one) but start circuit is not working (from battery to ignition switch to clutch switch to starter relay to starter solenoid to starter to ground-and back to battery), then here's where we at: with key off, use a small screwdriver and short the big cable at starter to the starter solenoid small wire connection, or use a small jumper wire to do the same-battery cable at starter to the small wire connection on the starter solenoid. Starter motor should spin and crank engine. Does it? If so, start checking the start wire out of ignition switch for power when key is held in start. If you have a clutch switch, check for power in with key in start. Should have battery voltage to the clutch switch with key held in start. Keep checking the start wire along the start circuit. Not sure how the start relay is wired into the circuit, would have to see a diagram, but if you pull the relay out and use a test light or multi meter, could check for power on the terminals where relay plugs in. Key off, should have one terminal that is hot. With key held in start, at least one other terminal should also be hot. This would be the start wire out of ignition switch sending a signal to the relay.
Good luck, hope you find it. Sorry I don't have a wiring diagram to help you more.

Aug 30, 2013 | 2000 Dodge Caravan

2 Answers

I have a 92 sentra lights come on but when i turn key nothing happens. Starter good ,relay good, head lights don't dim when you turn key . Car won't turn over at all


If by lights, you mean the dash lights come on, then ignition switch must be getting power. If dash is not working with key on, check the 30 amp fuse link which powers the ignition switch.
If switch is good and starter is good, the start wire from switch goes to, if automatic, to inhibitor relay (the park/neutral function) and then to starter. There is also an inhibitor switch on the shifter or on the transaxle that turns on the inhibitor relay when key is on and shifter in park or neutral. The inhibitor switch is powered by a 10 amp fuse D.
If you have a manual transmission, the start wire from ignition switch goes to the clutch interlock relay and then to the starter. This relay is turned on by the clutch interlock switch on the clutch pedal.
You can check for power on either relay, the inhibitor relay or the clutch interlock relay, with a test light. Pull the relay out, have the key held in start position. Now both relays would have power showing on two terminals where the relay plugs in. If inhibitor relay only has power on one terminal or no power at all, either ignition switch is not sending power or fuse D is out or the inhibitor switch is not working right. If clutch interlock switch does not have power on two terminals either the ignition switch is not sending power or the clutch interlock switch is bad.
If the relay checks are good, check for power on the small wire to starter with key held in start. If you have power there, the starter solenoid must be out.

May 08, 2013 | Cars & Trucks

1 Answer

All of a sudden my key fob failed on me. I changed the battery and it still doesnt work. Any suggestions??


FIRST CHECK IGNITION IPC BFC ACC 10 AMP FUSE IF ALL LOOKS GOOD. PUT KEY IN THE IGNITION SWITCH.TURN IGNTION SWITCH TO THE ON POSITION FOR 10 MINUTES UNTIL THE SECURITY LIGHT DISAPPEAR TURN ITSELF OFF,THEN TURN OFF IGNITION SWITCH FOR 5 SECONDS THEN TRY START THE ENGINE.

Jul 20, 2011 | 1999 Oldsmobile Alero

2 Answers

The car wont start, the brake pedal is locked like the anti-theft is active, the anti theft light is flashing when the keys are in the ignition. when i try to turn it on it doesnt turn over, just makes...


TRY REPROGRAM KEY .PUT KEY IN IGNITION SWITCH TURN IGNITION SWITCH ON POSITION 20 SECONDS DONT START ENGINE WAIT 20 SECONDS TURN OFF SWITCH THEN TURN SWITCH BACK ON 20 SECONDS WATCH THE THEFT SECURITY LIGHT BLINKING.WHEN THEFT STOP BLINKING VECHICLE WILL CRANK.IF LIGHT STILL BLINKING.TRY FEW MORE TIMES KEY IN SWITCH ON POSITION FOR 20 SECONDS.MAKE SURE YOU HAVE THE CORRECT CAR KEYS IN SWITCH IF NOT WRONG SET OF CAR KEYS WILL SET OFF THEFT SECURITY SYSTEM.IF KEY RESETTING TRICK DONT WORK.CHECK BATTERY POWER MAKE SURE YOUR BATTERY HAS 12.5 VOLTS AND CHECK SECURITY THEFT FUSE.IF ALL LOOKS GOOD YOUR SECURITY HAS TO BE CHECKED OUT AT THE DEALERSHIP.

Oct 08, 2010 | 2006 Ford Fusion

1 Answer

Doesn't start- Thought starter was bad replaced and still nothing -won't turn over?Battery Good Checked all fuses and starter that was replaced is good! Turn ignition key and nothing? Selinoid not even...


The ignition switch attached to the column is probally bad, check the small wire to the sloenoid for battery when the key is turned to the start postion, if no battery, your not getting power from the ignition switch to the starter solenoid.

Mar 13, 2010 | 1991 Cadillac DeVille

1 Answer

My 1997 chevrolet cavalier (standard) wont do anything when I turn the key to start. The battery is good. It was doing just fine. When I stopped and tried to turn it off the key would not turn off. Finally...


check the linkage rod between the ignition key switch and the electrical ignition switch itself for movement when you turn the key from off to start. if it doesn't move then you probably have a broken ratchet gear or rack gear in the steering column at the ignition key switch. if it does move that you probably have a bad electrical ignition switch.

Mar 03, 2010 | 1997 Chevrolet Cavalier

1 Answer

Key want work 2001 ford ranger, it will turn ignition but want crank truck.


CHECK VOLTAGE AT STARTER BIG WIRE COMES FROM BATTERY, SMALL WIRE FROM IGNITION SWITCH , WITH TEST LIGHT CHECK VOLTAGE AT SMALL WIRE WHILE SOME ONE TURNS KEY TO START POS. IF THERE IS VOLTAGE STARTER NO GOOD. IF NO VOLTAGE CHECK IGNITION SWITCH AND SAFETY NEUTRAL SWITCH.

Nov 06, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

Engine will not start in 1996 dodge ram


check the adjustment on the switch rod try to start the engine by removing the rod and moving the ignition switch with a tool sounds like the rack in the column has slipped

Feb 09, 2009 | 1996 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

fordexpert

Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...