Question about 2001 Chevrolet Monte Carlo

1 Answer

I am trying to replace the upper motor mounts and

I am trying to replace the upper motor mounts and need to know where to support the engine

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 14,036 Answers

You need to remove the hood and support it from the top.

Posted on Jul 17, 2009

  • Jonah Oneal Jul 17, 2009

    when you support engine from top you use a engine lift.to support engine weight.your engine.your lift brackets.you have one at back left.next to alternator.one at the front right next to engine strut.if you going to replace top mounts.the engine strut mounts .you probably wont need a engine hoist.just do one at a time.but the bottom mounts you need a engine hoist.dont use oil pan you could damage the oil pan and oil pump.

  • Jonah Oneal Jul 18, 2009

    what i meant dont use floor jack to raise engine to change engine lower mounts.could damage oil pan and oil pump.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

csmock132
  • 4669 Answers

SOURCE: replace the engine motor mounts and the transmission mount. Would like to know how to do it. Thanks.

Check the frame mounts too. You will have to loosen the bolts and jack the motor up with a jack and a woodblock.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Install three back spark plugs 2004 pontiac bonneville


there is a tool that replaces the dog bone upper motor mount that allows you to roll the engine forward which tilts the engine to give you more access to the rear plugs. you can also remove the upper mount and using a large bar roll the motor forward and block into place will do the same.

Oct 14, 2014 | 2004 Pontiac Bonneville

1 Answer

I have a 1999 Buick Park Avenue Ultra, the super charger belt needs to be changed along with the seized pulley located behind the motor mount. The mount is located above the crank shaft, attached to the...


I do have a question for you, if you remove the motor mount, can you change the pulley? If this is possible, you will need some jack stands, pieces of 2 by 4's and a hydraulic bottle jack. loosen the motor mount nuts and bolts( don't remove yet), with the bottle jack and a board, lift up the side of the engine(just enough to take pressure off the mount. now remove the mount. lift just a touch more, and set up the jack stands with boards on them(to support, and not damage the engine. also safety first). now lower the engine to the boards replace the pulley, and now go up with the engine, and replace the mount. I've done this on Toyota's,and think this may work for you also. hope this helps

Jan 03, 2011 | Buick Park Avenue Cars & Trucks

3 Answers

What is the dog bone


It's an engine mount. Usually it will be one at top/front engine and one onside /bottom engine. They are easily replaced, just be sure to take the weight off the mounts with a jack.

Feb 19, 2010 | 2001 Dodge Neon

1 Answer

1999 buick park avenue ultra motor mount and supercharger belt replacement


  1. Remove the engine mount to engine mount bracket nuts. Important: Ensure that the wood block extends past the width of the oil pan in order to avoid damage.
  2. Use a jack with a block of wood on the jack under the oil pan in order to support the engine.
  3. Remove the engine mount bracket front upper and lower nuts.
  4. Remove the engine mount bracket front upper and lower studs and spacer.
  5. Lower the engine as necessary and rotate the tensioner to remove the drive belt.Remove the supercharger belt.
  6. Reverse For INSTALATION

Dec 09, 2009 | 1999 Buick Park Avenue

2 Answers

I need to replace the motor mount thats on the passenger side,abd you access the main bolt thru the wheel well,it's a 2005 2.0,do you know what they call that motor mount


hello. you have 5 mounts front left side, front right side, lower strut rear of engine,upper strut right side and transaxle rear left side

Sep 14, 2009 | 2005 Dodge Neon

2 Answers

I have 2002 pt cruiser Put new upper and lower


IT SOUNDS LIKE THE MAIN MOUNT IN FRAME ON PASS SIDE IS BROKEN..I HAVE NEVER SEEN ONE BROKEN BEFORE OR REPLACED ONE,BUT IT WOULD A FAIR JOB TO REPLACE..ALSO THE BOLT THAT GOES THRU FROM FENDERWELL MAY BE BROKEN..CAUSING YOUR PROBLEM..THERE IS A SMALL PLASTIC PLUG IN FENDER WELL..ABOUT AN INCH OR SO IN DIAMETER..THERE IS A TORX BOLT(T55)IN BEHIND PLUG..CHECK AND SEE IF IT'S NOT BROKEN..TRY TIGHTENING OR LOOSENING IT..IT MAY BE BROKEN OFF IN PLATE THAT IS BOLTED TO ENGINE..LET ME KNOW WHAT YOU FIND

Sep 08, 2009 | 2002 Chrysler PT Cruiser

3 Answers

Location of motor mounts on 94 saturn sl1 where are they and how do you replace them? (all of them) or at least the major ones


There are four total mounts.

1. Upper engine mount located on the passenger side of the engine. Get this at the dealer, aftermarket, especially Anchor brand are garbage.

2. Lower engine mount, often refered to as a "dog bone" mount because of its shape. This one is located on the lower passenger side. You'll have to remove some splash shields to get to it. Aftermarket is OK.

3. Upper transmission mount, also refered to as a "dog bone" mount. Located under the battery.Aftermarket is OK.

4. Lower transmission mount. Located under the transmission. As with the top engine mount, dealer is better quality.

The two dogbone mounts usualy last a very long time, its the others that fail over time. Especially the upper one.

Jun 17, 2009 | 1999 Saturn SL

1 Answer

Motor mount msy need to be replaced and I just paid someone to do it a year ago--I need diagrams to troubleshoot/investigate


How do you know if it "doesn't seem to be new" if you don't know where it is? Why was it replaced in the first place? There are usually three of them, one or two on one end and two or one on the other end of the engine. You must jack up the front end of the car so that you can find the mounts (use jack stands under both sides to keep from getting crushed if the jack slips). Mounts are usually two metal plates with a rubber biscuit between--one side bolted to the engine and the other side to the frame. If the biscuit has come free from either plate--replace that mount. Bad rubber is usually swollen or torn badly. If oily, clean with rag. There is usually an upper brace on top of the engine that can become damaged if one of the lower mounts is damaged or missing bolts. Good luck with this.

May 29, 2009 | 2002 Oldsmobile Aurora

1 Answer

I need to know what size the motor mount bolt are on a eclipse


02886E MB309345 front motor mount to centermember bolt Go to: http://www.2gnt.com/CAPS/main0sub0.html Then click: Engine(Upper Left hand corner) Then Click: Engine Mounting and Support(Lower Right hand corner) Then click the corresponding part you need(to verify). Give that part number to your local Dealer and they can order that part for you.

Apr 14, 2009 | 1996 Mitsubishi Eclipse

Not finding what you are looking for?
2001 Chevrolet Monte Carlo Logo

249 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...