Question about 2005 Saturn VUE

1 Answer

If the clutch slave cylinder on my 2005 Saturn Vue is internal to the transmission, how would the fluid have poured out onto my garage floor? I think the transmission dude might be pulling my leg to the tune of $800+

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,486 Answers

No its internal meaning that its in the bell housing.The bell housing is bolted to the gearbox to hous the clutch befor being bolted to the engine.It has no seal on it.So when your slave cylinder leaks,The fluid drips from the bell housing.And the only way to get at it is to remove the gearbox.

Posted on Jul 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 saturn vue slave fluid check


I would first need to know what a slave is to let you know how to check the fluid. If you are talking about the slave cylinder for the clutch....well then, you should have a small round reservoir located on the firewall near the brace master cylinder.

Jun 04, 2015 | Saturn Vue Cars & Trucks

1 Answer

Repeated leaking with new slave cylinders on saturn vue 2007


The clutch hydrasulic fluid line needs to be replaced.

Mar 20, 2014 | 2007 Saturn VUE FWD 4

1 Answer

Clutch fluid leaking under engine 2002 Saturn Vue


Could be your clutch slave cylinder,here's how to replace.

Mar 01, 2013 | 2002 Saturn VUE

1 Answer

2004 saturn vue clutch goes to the floor, unable to put it in gear.


check fluid in slave resevior also check to see if clutch slaved is cracked

Nov 14, 2011 | 2004 Saturn VUE

1 Answer

Hard to shift gears from shifter. Can go to transmission and shift easily.


loose or mis adjusted shifter cable to your transmission. usually, they break. stretched shifter cable? possible. manual transmission? did not specify. automatic? suggest cable problem,loose cable at some point,look with 2 people to see where the cables jumping during the shifting process. manual? suugest a bad or going bad slave cylinder on the side of the transmission,or low fluid to the clutch master cylinder.is the clutch pedal weak? or just goes to floor and will not come back up? this is sign of leaking clutch master cylinder,bad clutch master cylinder. or both. see brake fluid on ground under the car after you pump the clutch several times? either a bad clutch master cylinder,on the firewall,drivers side,just under the windsheild,or a bad slave cylinder on the side on the transmission under the car on the transmission. suggest that you look for fluid leakage. follow the trail of fluid to the source.

Mar 04, 2011 | Saturn Vue Cars & Trucks

2 Answers

Having problems with the clutch in my 1998 Ford Ranger. There is no freeplay, and it is very difficult to shift. Do I need to adjust the clutch? If so, how do I adjust it?


The clutch is not adjustable,it is a fluid clutch.It has to be a leak,or the slave cylinder,and,or, the master cylinder are bad,It does not have to be leaking to be bad,but it is one of the two.Rate please,thank you.

Jul 12, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Need to replace slave cylinder clutch goes to floor without any pressure. Does the transmissin have to be taken out


Transmission stays in. Buy a Haynes manual for your model and it shows how to replace slave cylinder.

Sep 08, 2009 | 2002 Saturn VUE

2 Answers

Bleeding my saturn vue clutch after slave install and having problem with it


first fill the clutch reservoir with brake fluid.get some body to help you.besure dont let clutch reservoir fluid get low during this procedure.get a clear vinyl tube.connect it to bleeder plug on slave cylinder.put the other end of vinyl tube in a container filled with half clean brake fluid.now get helper to open bleed screw on slave cylinder just a hair.now you pump clutch pedal 10 to 15 times.with out bringing pedal the full way up.do this until you see no air bubbles in vinyl tube.when all air is out.before tighten bleed screw make sure you keep slight pressure on clutch pedal to keep air from going back in line.when job complete clutch pedal fill firm check slave cylinder brake fluid level. check for leaks.you all set to go.

Jul 13, 2009 | Saturn Vue Cars & Trucks

1 Answer

Clutch fluid leaking from bottom of crankcase/bell housing


The slave cylinder will have to be replaced and air bled from the system to make this repair.
Good luck

Nov 24, 2008 | 2003 Saturn VUE

Not finding what you are looking for?
2005 Saturn VUE Logo

816 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...