Question about 2000 Dodge Durango
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The motor is located just under the glove box on the passenger side. I remove the glove box then the panel below the glove box. I also go ahead and pull back the carpet and the padding under the motor. It is held in place by 3-4 bolts that take a 7-8 millimeter socket. I use a swivel extension for the back bolts. The motor with the fan blade attached is a tight fit, just keep wiggling and pulling it should come out. Try to remove the old moter without cracking the fan blade, because sometimes the replacement motor doesn't come with a blade
Posted on Sep 17, 2008
the resistor is behind your glove box. open the box and push in the sides to release it and let it hang down...the resistor is right there. I didn't try to replace it, a friend did it, but the part was under $20.
Posted on Feb 01, 2009
The blower motor resistor is located on the dash panel, on passenger compartment, right behind the glovebox. The resistor is mounted on a plate assembly that can be removed as shown on picture below:
Posted on Sep 04, 2009
SOURCE: heater blower noisy
there should not be no more then three screws and unplug and the blower is out and you say its noisy check for leaves and to make sure the blower is not hitting anything before you go to buy another one.
Posted on Feb 14, 2009
Tips for a great answer:
Apr 11, 2016 | Cars & Trucks
Sep 06, 2015 | 2006 Honda Pilot
Aug 31, 2014 | Kia Sportage Cars & Trucks
Jan 11, 2012 | 2003 Chevrolet Malibu
Mar 12, 2011 | 2001 Suzuki Grand Vitara
Jan 16, 2011 | 2003 Dodge Neon
May 10, 2009 | 1988 Mazda B2600 Cab Plus
Apr 14, 2009 | Cadillac DeVille Cars & Trucks
4,708 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: