Question about 2004 BMW 3 Series

1 Answer

Need to remove the inside door handle on my 2004 X3...please help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,896 Answers

You will have to remove the lock and the window controls, then remove plastic plate by mirror. Also remove any other screws from the door panel.
After all screws are removed, carefully pry the door panel of with big flat-head or mini pry-bar. After if is all free and you can pull it away from the door, pull it up and off the door.

There will 4 screws holding on the door handle. You must remove plastic clip holding on door handle to the rod.

Reverse procedure for reinstall.

Posted on Jul 17, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need diagram on how to remove driver exterior door handle X3


you have to take door card off and do it from inside the door panel

Jun 26, 2017 | Cars & Trucks

1 Answer

2004 ford focus driver door will not open when door handal is pulled what do i need to fix it


need to open the door skin (remove from door)
there should be a metal rod going to the inside of the handle if lifting the handle is not opening the lock you will have to bend it in such a manner that it will put more strain on it (tighten) from the lock to the handle then replace door and try again, f not the inside of your handle may be broken or damaged check it on the inside for worn eyelet hole or broken and replace as needed

Sep 27, 2014 | 2004 Ford Focus

1 Answer

Battery is dead, doors are locked


is a hard one but I would try and get to starter motor and connect a positive lead from a backup battery to positive side of starter motorthis will give you power

Jan 27, 2013 | 2004 BMW 3 Series

1 Answer

2008 BMW X3, removing the left rear outer door handle.


2004 x3 Rear passenger door handle came off/apart. What are the steps to remove the inner door panel to access the door handle and repair it?

Apr 06, 2010 | 2007 BMW X3 3.0si SAV

1 Answer

Replace door speaker


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls

Jul 12, 2009 | 2004 Cadillac Deville

1 Answer

How do you properly remove inside panel on driver door of 2004 volvo xc 70 in order to access the window to put it back on its track?


Look for hidden screws, around the edge of the door, inside the door pocket, under the pull close handle and 'in & around' the door handle lever.
Then with those successfully removed, the whole door card should slide either up, or in the door edge direction to remove.
Be careful not to be too heavy handed, as this will undoubtedly break plastic lugs/clips etc.
Then once you have removed the door card, familiarize yourself, with where & how it fits on to the door for reassembly.
I hope I've helped.
Good luck

Jul 10, 2009 | 2004 Volvo XC70

1 Answer

How to remove the inside door on 2004 Impala to replace side mirr


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door

Jan 11, 2009 | 2004 Chevrolet Impala

1 Answer

TRYING TO REMOVE A REAR DOOR OUTER HANDLE


Lower hole in the door jamb loosten allen screw until the cap comes off. Upper hole there is a #20 torx slightly down and inboard of the hole, you need a really long torx bit and pull the handle out slightly. It also helps to pull weatherstrip loose so you can see it.

Jul 23, 2008 | 2007 BMW X3 3.0si SAV

Not finding what you are looking for?
2004 BMW 3 Series Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Anthony Jones
Anthony Jones

Level 2 Expert

128 Answers

Frankie B

Level 2 Expert

65 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...