Question about 1999 Chevrolet Tracker

Open Question

How to install clutch on chevy tracker

How to install clutch kit on chevy tracker

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: i have a 2001 Chevy

it could be the clutch if ur clutch is not disengageing properly it wont let u and how old is the gear box u may find it is that if its old or u may also need to check the gearbox oil if that has not been changed in years since u brought the tractor it may have grit and dirt stoppin the gears movin perfectly, personaly i think ur gear box is nakered

Posted on Oct 02, 2008

Ad
gordanddar
  • 477 Answers

SOURCE: replace clutch kit on 1995 chevy pickup

pretty simple jub any mechanic can do , but lots of work , Gear box has to come out , and drive shaft removed

Posted on May 05, 2009

  • 834 Answers

SOURCE: im installing a clutch in 1994 chevy s10 the

Are you referring to the pilot bearing that is located in the end of the crankshaft?

Posted on Jun 13, 2010

  • 360 Answers

SOURCE: The clutch on a 93 Geo Tracker is burning can I

You can repair it, but be sure to replace not only the clutch disc and pressure plate, but the throw out bearing as well. If is has a hydraulic clutch, I'd probably consider replacing the slave cylinder, also.

If the clutch has been slipping for a while, it may have heated the flywheel clutch surface to a point where it has "heat cracks" and little distortions.

If this is the case, you can probably see little spidery cracks and perhaps a "bluish" tinge around the cracks, indicating they have been hot. To be on the safe side, figure on having a machine shop reface (resurface) your flywheel. Since you'll have to pull the drive-shaft prior to dropping the transmission, it would be an excellent time to replace the tail shaft seal in the transmission.

If you do all this, you should be able to enjoy many more miles (at least where the clutch mechanism is concerned) of trouble free driving.

All the above is based on an assumption that you possess the necessary mechanical skills to do this job. If you don't feel comfortable with it, talk with friends, neighbors, and relatives to try and reach a consensus on a reputable local mechanic.

Good luck, what ever you decide to do!

Posted on Feb 06, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get tension off ac belt on a 2001 Chevy tracker


How-To Replace The Serpentine Belt On A Chevy Tracker ...

? 1:22
www.youtube.com/watch?v=sXLTZzEZdSU
Oct 28, 2014 - Uploaded by Deo Ole
How-To Replace The Serpentine Belt On A Chevy Tracker ...2001 Chevy Tracker V6 2.5L Head Instal and Timing Chain Instal - Duration: ... XL 7 2.7L Air conditioning compressor removal and smaller belt installed - Duration:

Aug 23, 2015 | AC Cars & Trucks

1 Answer

I have a 1989 chevy geo tracker and ive had to replace the clutch and ive had nothing but problems with it not going into gear and now im told that it needs a new clutch arm and im told they dont carr


this is one of the most common failures , on track-kicks.
the cause is easy:
not replacing the cable at 100k or lubing it every 30k.
the acid test (created by me) is the 1 inch rule.
if the bell arm moves 1 inch (zero play) and the clutch fails to disengage then the clutch is bad.
if it does not move 1inch the cable system is bad.
easy huh?
see the full sad stories here. and cures. (suzuki stills sells the parts for a little while longer.. they are Chapter 11 here)
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

i have all P/N , for parts at the suz dealer, for this. ask.

Apr 30, 2013 | 1989 Geo Tracker

1 Answer

2.5l V4. Como sincronizar cadena de tiempo?


Motor Ford 2.3 Lts. 16 V. Sincronizaci?n Timing chain kit ...

? 8:18
https://www.youtube.com/watch?v=QEzqopUjSak
Jun 10, 2013 - Uploaded by Carlos Parra Cort?s
Saludos no se usa un diagrama para sincronizar se tiene que poner ... ... Ford Escape & Fusion 2.3L 2.5L DOHC Engines: Valve Cover Gasket ... COLOCANDO LA CADENA DE TIEMPODE MAZDA 3 FORD ECO ESPORT ...

Sincronizaci?n de cadena de tiempo tracker - YouTube

? 0:13
https://www.youtube.com/watch?v=oFb44LJ9msY
Jun 6, 2014 - Uploaded by tonyeldogor
Puntos de referencia de cadena de tracker. ... 2001 Chevy Tracker V6 2.5L Head Instal and Timing Chain Instal - Duration: 25:45. JunkStar ...

Montaje de cadena de tiempo Zuzuki XL.7 - YouTube

? 3:52
https://www.youtube.com/watch?v=4k73S3dg5mI
Jun 21, 2014 - Uploaded by carmax100pre
Se demuestra solo es montaje de la cadena de tiempo. ... 2001 Chevy Tracker V6 2.5L Head Instal and Timing Chain Instal - Duration: 25:45.

Ford ranger 2.3 motor argentino CADENAS A TIEMPO ...

? 5:03
https://www.youtube.com/watch?v=8dR8mo8Ooy4
Jul 1, 2013 - Uploaded by eduardo soledad valencia



Jan 22, 2013 | Ford Mondeo Cars & Trucks

1 Answer

Can I adjust the clutch on a 1998 chevy tracker in any way? I am needing to replace it in a few days but want to continue driving it until wednesday. pressing the clutch in and starting the car in gear...


No you can't adjust this problem. You have a problem with your hydraulic portion of your clutch or your pressure plate so you need to get it fixed.

Feb 27, 2011 | 1998 Chevrolet Tracker

1 Answer

Can I buy a freon kit for my 2002 chevy tracker?


At your local auto parts store. You can either do it yourself or some auto parts stores have done it for me for free. I just had to buy the kit.

Aug 02, 2010 | 2002 Chevrolet Tracker

1 Answer

1999 Chevy Tracker - Manual Transmission Issues


Sounds like a bad countershaft bearing. The trans will need removed and disassembled to fix it.

Jun 02, 2009 | 1999 Chevrolet Tracker

1 Answer

1999 Chevy Tracker Transmission Problem


Well it sounds like you have a the vacum for the four weel drive is trying to engage when it is in nutrial and that is where the noise is comeing from. I just think the person you took it to is just trying to make some money off of you

Oct 18, 2008 | 1999 Chevrolet Tracker

1 Answer

I have a 2001 Chevy Tracker/Suzuki tracker--Sometimes when I try to change gears it will not go into gear--It is just like I have not engaged the clutch --But I am? Is it the clutch or throw out...


it could be the clutch if ur clutch is not disengageing properly it wont let u and how old is the gear box u may find it is that if its old or u may also need to check the gearbox oil if that has not been changed in years since u brought the tractor it may have grit and dirt stoppin the gears movin perfectly, personaly i think ur gear box is nakered

Oct 02, 2008 | Chevrolet Tracker Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet Tracker Logo

Related Topics:

538 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...