Question about 2002 Chrysler Concorde

2 Answers

2002 Chrysler Concorde Lxi

Stuck in gear. Was at about 3 1/2 RPM's just going 40-45

Shut it off and restarted and ran fine.

Check engine light is on.

What's wrong?

Posted by on


2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 160 Answers

There is a faulty sensor or valve. Sounds like a valve. The best thing to do, is take it somewhere that can diagnose the trouble code. Autozone can I believe, and they can tell you exactly what's going on with it.

Posted on Jul 17, 2009

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Without pulling a code its hard to say. Most likely a speed sensor causing the transmission to go into limp in or default mode due to not recongnizing either vehicle speed or input speed. Rec. replace speed sensors or pull code and properly diagnose vehicle. Limp in is second gear on this car so thats why rpms are high, its only meant to still be able to move car until repaired. It could also be other things too but ive seen plenty of speed sensors that are cheap to buy go bad.

Posted on Jul 30, 2009

  • reesej_85 Jan 08, 2011

    Wheres the location of the speed sensor on the 2002 concorde?



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a knock on 2002 Chrysler concorde lxi has 3.5 engine. is worse when accelerating.

Dear Dennis,
Mechanics will tell you you have an engine that is about to blow up. This is the symptom of such a question.
I should recommend you not attempt to even start the car at all. Have it towed to a honest garage for a true diagnosis.
The repair may run from many hundreds up to a couple thousand dollars.
God bless your efforts.

Nov 10, 2016 | 2002 Chrysler Concorde LXi

1 Answer


First thing is to have the computer scanned for trouble codes.
My guess would be a torque converter or overdrive problem.

Jun 26, 2012 | 1999 Chrysler Concorde

1 Answer

I have a 2000 Chrysler Concorde LXi. The check engine light came on while accelerating and at that point the transmission would not shift to the next higher gear. Eventually it did shift and ran normal...

That's telling you that something is wrong and needs to be checked and/or repaired. If you stop at one of the bigger autoparts stores, they will scan it for you for FREE, and let you know what code is coming up. That code should point everyone in the direction of problem. Without retrieving that code, you'll be wasting time and money on guessing. Once they tell you what the code(s) is, they may recommend a part to fix it. If your uncomfortable with that advice, get back to us with that code(s) and we can better advise you . With that said, transmissions now days, are expensive and fly apart pretty easily compared to the transmissions from years back, so I wouldn't advise going any further than a place to have it diagnosed properly first.

Apr 13, 2011 | 2000 Chrysler Concorde

1 Answer

Intermittent start/gauges

Could be the smaller wire at the battery terminal,clean battery terminals and check connections are tight.

May 26, 2017 | 1998 Chrysler Concorde

1 Answer

Chrysler Concorde LXI 4 door - 2004 The car starts up and seconds after, the RPM drops and the car shuts off. The code P0513 comes up on the computer.

That is a code for an invalid skim key. If you have another skim key try it. If it does the same thing then the skim module may be bad.

May 06, 2009 | 2004 Chrysler Concorde

1 Answer

2002 chrysler concorde lx low idle

with a 2002 Concord 3.5 V-6, what should the rpm be at 60mph? 70 mph?

I'm not sure if the overdrive gear is lost in the tranny, but the transmission light is on.


Apr 05, 2009 | 2002 Chrysler Concorde

1 Answer

Mt 1999 concorde lxi shuts down and after 1 to 4 seconds restarts

it sounds like your computer wont take your key. best thing you can do is take the car to the dealer.

Dec 19, 2008 | 1999 Chrysler Concorde

Not finding what you are looking for?
2002 Chrysler Concorde Logo

445 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts


Level 3 Expert

80608 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers


Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides